List of products by brand Motorline

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

The MF2020 is a column photocell developed to safeguard all types of industrial doors (sectional and fast doors) up to a maximum width of 10 metres.

The sender and receiver create a infrared grating it offers protection up to eight feet high.

When the infrared beams are interrupted, a signal is sent to the control room. After the holding area is clear, a new signal is sent to the control to indicate that the area is clear.

Box button pusher with 3 buttons (Open-Close-Stop)with dimensions of 72x150x64 mm. Protected by IP65.

Magnetic ground spindle Motorline MD150 for vehicle detection and automatic opening of barriers or doors.

The ground magnetic spiral is useful for accurately detecting the presence of metal objects, such as cars and trucks, even when vehicles are not in motion.

Program selector Motorline MCELE01 to define the different modes of operation of automatic glass doors KAPV and pedestrian motor M1805. It can work with a security code so that when exposed, its use can be blocked.

KIT engine Motorline OL1500 to 230V with oil and grease lubricated reducer for sliding doors up to 1,500 kg heavy duty and IP44 protection.

KIT engine Motorline OL2000 to 230V with oil and grease lubricated reducer for sliding doors up to 2,000kg heavy duty and IP44 protection.

Electromechanical barrier of passage Motorline Brushless turbocharger with brushless motor.

The new TURBO barrier gives us strength and precision for 100% intensive manoeuvres, with no mechanical wear due to its Brushless technology. Its digital encoder offers the possibility to perform very precise smooth stopping movements and regulation.

CONTENT OF THE KITThe following: 24V brushless barrier + MC90BL-BR electronic control unit + MF30 photocell + 2 FALK controls

Designed as a comprehensive solution, the ZUMA barrier was developed with an extendable mast in different sizes as needed to promote easy and efficient transport.

We highlight the innovative mast application system, in which from a model it is only possible to transform the barrier to the left or right, which allows for efficient stock management.

In terms of finishing quality, it goes through the process of galvanizing and lacquering, ensuring greater durability to the product.

The barrier universe has been renewed!

KIT Engines buried Motorline "SUBWING' to automate swings up to 2.5 metres.

SUBWING has been developed to automate beating gates with blades up to 2.5m, available in 230Vac, or 24Vdc.

Discreet, it's buried beneath the base of the sheet, making it virtually invisible, without altering the appearance of the gate.

The construction of the outer case in galvanized steel provides great robustness and strength. With the possibility of applying mechanical caps on the automatic to limit opening and closing.

Mechanical opening and closure for buried motor Motorline SUBWING.

Replacement joint motor attack (pin + pin support) Motorline RED EVO.

Automation for sliding glass doors Motorline with its automatic and silent sliding system, the KAPVSP Simples glass door, is the perfect solution to improve the inflow and outflow of people from the buildings.

Designed for a daily intense and continuous use.

Plant developed to work with three-phase motors from 400Vac to 1500W. What. Ideal for use in STARK, KVM115 and KVM2020 engines.

Multifunctional module for opening pedestrian doors by command. Includes receiver module + 2 Falk controls.

Multifunctional module for opening pedestrian doors by command.

Table of manoeuvres Motorline 230Vac MC52 developed to use 2 vibrating motors up to 500W per motor.

Table of manoeuvres Motorline MC50KVM single-phase 230V with up/down/stop pusher developed for the automation of sliding, tilting, sectional and passage barriers.

Control centre Motorline MC60KVM with output for electro lock EF25.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

Central Motorline MC410 developed to work with 400Vac three-phase engines up to 1500W. Ideal for application in engines STARK, KVM115 and KVM2020.

Electromechanical barrier Motorline MOTIZA with galvanized and lacquered steel box, intensive use, mast up to 5m.

One of the highlights of this barrier is its strength and durability. What. Developed with a flat-rolled products of iron or non-alloy steel, the MOTIZA barrier is highly corrosion resistant, which guarantees a long durability.

This means that even exposed to different climatic conditions and external agents, the barrier will continue to function properly. Another advantage is that the galvanized and lacquered steel gives the barrier a aesthetically pleasing and modern finish.

Power supply input 230Vac and output 12Vdc of 35W.

Other bars and rods of stainless steel M4 30x12x1000 mm for screwing with separators for residential or industrial sliding motors.

KIT engine Motorline BRAVO524 at 24Vdc with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

Plates, sheets, film, foil and strip, of non-alloy steel for residential or industrial sliding motors.

Unlock box Motorline CSV200 for external drive of any motor centre shaft of commercial or residential metal shutters.

Relay module Motorline MC035.

Replacement Baseboard and Display Motorline RED EVO.

Manufacture from materials of any heading Motorline the MFE model, external modulated reflector with mirror, with rated range of 12m.

Because it is a mirror photocell, it does not need any cable passage to the other side because it emits an infrared signal that reflects in the mirror on the opposite side and receives it again.

Mastiff with barrier skirt Motorline SIGMA or ZUMA.

Accessory allowing 180° opening of an engine Motorline SUBWING.

Tube motor Motorline 9292mm force 180Nm and 300Nm for roller shutters.

Motors designed to drive blinds and curtains, indoor or outdoor, allows the application of various accessories to work with round tubes.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Plastic housing Motorline BRAVO in black compatible with BRAVO500.

Electric brake Motorline ROLLING SP.

Key to unlock engines Motorline.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

Engine Motorline KVM2020 suitable for doors or bars of heavy metal or without spring clearance.

" The manufacturer has discontinued the KVM2020 model and offers us its new range ROLLING "

Tube motor Motorline 5959mm force 80Nm and 120Nm for domestic roller shutters and awnings.

Motors designed to drive shutters and curtains, indoor or outdoor, allows the application of various accessories to work with octagonal or round tubes.

Center axle coil motor Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

KIT Motor coil centre axle Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Bi-motor coil centre axle of Motorline model ROLLING SP with a lifting capacity of up to 360 kg with electro-brake, for 240 mm pulley and 76 mm axle.

Engine Motorline KVM25 is a axle traction automation, for automation of other, of circular cross-section. What. It is ideal for all types of vertical opening doors due to its ease of installation, configuration and maintenance.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

The new FORT engine of Motorline it is an automation that can be applied in doors up to 400kg. What. It is a motor in the form of a column with a built-in RGB flashlight at its top, informing the status of the door maneuver.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.