List of products by brand Nice

Electronic plate Nice SNA1 for SPIN10, SPIN11 and SN6011 engines.

End of the race Nice Thor and Rob.

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

Pair of transmission axes 20x20 mm, length 1500 mm for tilting motor Nice Ten.

Motor support Nice Ten in length 520 mm.

Tractor Nice SPIDER for sectional engines Nice SP6065, SP6000 and SP6100.

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

Replacement plant Nice SNA2 for SPINBUS SN6021 sectional engines.

Plastic motor housing Nice ROAD 400.

Plastic housing Nice THE ROBUS HS250/600.

12-tooth crown, module 6, use associated with ROA81 zipper.

Run is supplied with a module 4 crown for use with standard ROA7 and ROA8 zippers.

Grupo reenvío chain NICE SPIDER/SPIDO Ref PRSP02A.

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2, and swings up to 9,8 m2.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Spin 650N NICE engine for sectional doorss up to 8,8m2 and swings up to 9,8m2.

Motor head Nice SPIN SN6021 650N for sectional doors up to 10,5 m2 con embedded table SNA20.

Important: The Guide is not included.

Opla wall mount for NiceWay buttons.

Discreet, elegant and functional: Very thin - as much as the single plate - the transmitters, located on the Opla wall plate, allow you to add control points in a discreet and elegant way without masonry work.

NiceWay's Opla wall plates are available in square Opla-S and rectangular Opla-R versions, and in numerous color variants.

1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Pair of optical equipment Nice FT210 adjustable at 210o for sensitive edges with wireless transmitter and mobile mounting.

Metal wrapping for photocell Nice FT210.

Manufacture from materials of any heading Nice "It was Photocell L" Emitter-receiver 'EPLIO' and 'EPLIOB'.

Engine corridor Nice ROBUS RBS400 (up to 400KG) and ROBUS RBS600 (up to 600KG) irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124).

Efficient and safe: functional mechanical design and high performance materials.

Easy-to-play and safe unlock lever; magnetic end, simple installation and which allows to reduce the length of the zipper.

Easy to program,thanks to the MyNice Pro app, connecting to the control unit the Pro-View or the BiDi-WiFi.

Engine corridor Nice ROBUS RBS400 (up to 400KG) and ROBUS RBS600 (up to 600KG) irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124).

Efficient and safe: functional mechanical design and high performance materials.

Easy-to-play and safe unlock lever; magnetic end, simple installation and which allows to reduce the length of the zipper.

Easy to program,thanks to the MyNice Pro app, connecting to the control unit the Pro-View or the BiDi-WiFi.

KIT engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

New 600N NICE SPIDO engine with integrated central and receiver. For sectional doors up to 9.6 m2 and tiles up to 10.5 m2.

Remote control with the MyNice Welcome app Nice Core Wifi gateway to manage all your automatisms.

Table of manoeuvres Nice OGA2N at 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Engine Nice RUN HS for the rapid actuation of switches for use in the manufacture of motor vehicles 1.200kg.

Rapid opening and closing maneuvers: RUN400HS opens a 4 m canopy in approximately 6* seconds, while RUN1200HS opens a 7 m canopy in approximately 18* seconds.

Unlock with motor key Nice for buried engine L-Fab or M-Fab.

Unlock with a lever key, which will be used in case of installation on surfaces, such as sand or ground.

Compatible with engines Nice M-Fab, L-Fab and Big-Fab.

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m.

It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Engine buried and removable Nice M-Fab HS at 24 V for rapid operation of swing doors up to 3 m.

Buried and removable mounting, ideal for residential applications. Electromechanical motor gearbox 24 Vdc, with magnetic encoder.

Ideal for heavy use and fast manoeuvres: opening to 90° in approximately 8* seconds.

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

NICE ROA37 manoeuvre chart for sliding engine THOR 1500, incorporating a receiver with RollingCode 433,92 MHzcompatible with FLOR and SMILO emitters. The programming is analog using micro dip switches.

Garage crew Nice MYGO4 monodirectional 433 MHz.

Electric motor Nice Robus RB600 (PRRB01B)

The unlock safe Nice KIOMINI is an aluminum cabinet mainly for commercial roller shutter motors, and their function is to unlock the electrobrake of the rolling motor for manual operation in the event of a power failure. It also includes a button for automatic actuation of the automation.

Spare center Nice SPRBA3HSR10 for RB250HS and RB500HS sliding engine.

Gearbox and pinion Nice ROBUS and ROAD.

Manage the opening of your residential garage door with NIC's IT4WIFI WiFi moduleIt is available as standard on iPhones and available on Google Play for Android devices. The NICE IT4WIFI module is operated by Opera, only available on NICE manoeuvring frames.

Dented helicoidal motor reducer Nice SPIN with output shaft.

Metric screws 5x40 for adaptation of Guides Nice SPIN in heads Nice SPIDER.

Motor head Nice SPIDER 800N Brushless + 2 MYGO4

* Does not include Guide. The engine head is designed for replacement.

Motor Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice app, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Security photocell with mirror model Era Photocell M 12/24v for distances up to 15 metres.

Emitter with mirror. Orientation and sensitivity regulator. The output of the relay shall be 500 mA / 48 V

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

This is the NICE RUA1. Control electronic plate RUN 1800 / RUN 2500 for sliding motors of automatic doors and entry gates weighing up to 1800 kg and 2500 kg in its two versions with this model of control manoeuvring box for a totally safe and efficient configuration of its functions thanks to this control centre