List of products by brand Nice

Unlock with a lever key, which will be used in case of installation on surfaces, such as sand or ground.

Compatible with engines Nice M-Fab, L-Fab and Big-Fab.

Gearbox and pinion Nice ROBUS and ROAD.

Manage the opening of your residential garage door with NIC's IT4WIFI WiFi moduleIt is available as standard on iPhones and available on Google Play for Android devices. The NICE IT4WIFI module is operated by Opera, only available on NICE manoeuvring frames.

This is the NICE RUA1. Control electronic plate RUN 1800 / RUN 2500 for sliding motors of automatic doors and entry gates weighing up to 1800 kg and 2500 kg in its two versions with this model of control manoeuvring box for a totally safe and efficient configuration of its functions thanks to this control centre

Manufacture from materials of any heading Nice TOO3000 and TOO4500 230 V electromechanical switchgearblades up to 3 m and 300 kg (TOO3000 model) and up to 4,5 m and 250 kg (TOO4500 model).

NICE swing arm with sliding bearings and optimised geometry for overflowing swing doors.

Accessory Nice BMA1 for openings up to 360° in engines buried for leaves with a long maximum of 3.5 m.

Pair of transmission shafts 20x20 mm, length 200 mm for tilting motor Nice TRY.

Pair of standard telescopic straight arms for tilting motor Nice TRY.

Transmission device for a couple of motor shafts Nice TRY.

NICE Era One LR bidirectional long range 433 MHz with 4 buttons: 3 radio channels and 1 button to request automatic status.

NICE transmitters were One BD bidirectional of a kind used in motor vehicles: 3 radio channels and 1 button to request automatic status.

Radio frequency 433,92 MHz with rollingcode encoding, enabling code management, self-learning with 192 Bit encoding, also compatible with encoded receivers Nice O-code floor. The two-way Era One remote is compatible with previous versions of plug-in and external receivers Nice, operating in one-way mode.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Unlocking kit Nice KI1 from the outside with metal rope and key chain.

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Other, of circular cross-section Nice IN ORDER TO ENSURE THE CORRECT APPLICATION OF THIS REGULATION, MEMBER STATES SHALL TAKE INTO ACCOUNT THE FOLLOWING:.

Unlocking Nice WINGO thumping engines.

Control, programming and diagnostics unit for equipment with the BUS T4 connection, in situ or remotely via GPRS through the connection with your PDA, Smartphone or PC.

Guidance for the extension of 0.8m + motor belt Nice SPIDO 600, PLEASE.

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters.

BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

This is the NICE ROBUS maneuver schedule compatible with the series RBA3/C or RBA3 SRBA3R10.

NICE M6 30x30x1000 mm galvanized zipper for welding and crown coupling RUA12.

NICE M4 22x22x1000 mm galvanized zipper for welding directly to the door.

Replacement Pinon Nice SLIGHT SLH400

Crown axle output group Nice HIS 2000.

Set of unlock knob, bulb and keys Nice THAT'S RIGHT.

Sliding motor unlock assembly Nice ROAD.

Pinon Z15 M4 slide for engines Nice from the ROBUS and THOR series

Crown of 36 teeth Ø inner 25,4 mm.

Lever unlocking sliding engines Nice ROBUS, ROAD and ROX.

Wi-Fi controller for the smartphone operation of automatic systems of the mark Nice. What. It includes domestic blinds, section motors, sliding motors or lights.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

Motor for rapid actuation (HS technology) for swing doors with blades up to 3 m or 270 kg. Electromechanical gearbox with articulated arm, external mounting, 24 Vdc, with magnetic encoder. Ideal for residential applications also in the presence of large columns. Ideal for heavy use and fast manoeuvres: opening to 90o in approximately 10 seconds.

Lever axle unlocked Nice THE FOLLOWING POINT IS ADDED:

Leverage release Nice RUN

Plastic housing for sliding motors Nice THOR IS 1500.

For the purposes of this Regulation, the following definitions shall apply:

Issuer Nice It was One model "ON2CE" 2-channel at 433.92 MHz with multiple insertion sequential coding.

Issuer Nice It was a 2-channel Inti at 433.92 MHz available in various colors (Pack of 10 units).

Spare set end of race Nice SPIDER AND SPIDER.

End of inductive running for engine Nice I'M GOING TO RUN HS, ROBUS 1500, ROBUS HS, ROBUS 400/600.

Unlocking pill Nice ROAD400 with two metal keys.

Triangular NICE unlock key for engines of the ROAD, ROBUS and TOO series.

Extension of 0,8 m with mounting fittings for sectional motor guides Nice SPY.

For the purposes of this Regulation: Nice; SHEL50KCE, SHEL75KCE, SPIN10KCE, SPIN11KCE, SPIN21KCE, SPIN22KCE, SPIN23KCE, SPIN40/A. THIS IS NOT THE FIRST TIME I'VE SEEN THIS.