Electronic central Motorline MC160 230Vac to control firewall curtains with 24Vdc engines up to 300W of power.

When the unexpected happens, security cannot fail. La central MC160 was developed to control firewalls, ensuring protection in fire situations.

Support 24Vdc motors up to 300W power, guarantees safe and controlled movement of curtains in emergency applications.

Central Motorline MC76 for roller blinds with buttons Up, Down, Pair.

The MC76 plant has been designed to be flexible, safe and efficient automation of roller shutters, gates and garage doors.

With 100V-240Vac universal power supply, the MC76 is a versatile solution that adapts to a wide variety of needs, from small businesses to large industrial facilities.

Maneuvering frame for roller blind JCM Forsa with Receptor and RadioBand

Table of manoeuvres DEA (with 100A box) with 433 MHz built-in receiver for the automation of 1 motor roller shutters in 230V AC.

Selectable operating logic (paso-paso, open/close separated, present man), programmable working time.

Control panel BFT THALIA BT A80 DUO for 1 or 2 operators of 24V for cancellations in high complexity systems.

Central HR Matic B120 Plus of 230V for the control of battening gates, one or two leaves, sliding and tilting. For both electromechanical and hydraulic engines.

Table of manoeuvres EMFA C2M+R433 24V for 1 or 2-leaf smoothing doors, with 433MHz built-in receiver open source.

Control panel BFT "ZARA BT A80" with DIP switch and potentiometers for one or two 24 V electromechanical operators for sliding doors.

Control panel BFT "ZARA BT L2" with DIP switch and potentiometers for one or two 24 V electromechanical operators for doors of 230V/80 W.

Central Motorline MC410 developed to work with 400Vac three-phase engines up to 1500W. Ideal for application in engines STARK, KVM115 and KVM2020.

Expansion card with 4 inputs - 1 NC-NO outputs, compatible only with NET series maneuvers.

Table of manoeuvres DEA NET230N installed in a steel base with tracks to pass the cables and riel DIN to use with art. STEELBOX.

Steel case DEA STEELBOX painted and protected with key, to install maneuvers and other devices.

Central command Beninca DA.SO4 for guardparking VE.SOR.

Allows 1 to 4 car parking connection VE.SOR.

This is a universal maneuver chart Clemsa Class X for 230Vac drives with built-in Long Frequency Receiver (LR)).

Central command Nice SPYBOXBHS with courtesy LED light for sectional engine SPY650HS and SPY800BDKCE.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

Table of manoeuvres Oxygen ERATO for one- or two-bladed 230Vac pulsed motors with integrated receiver at 433 MHz.

Includes IP65 plastic case.

Central command Nice SPYBOXB independent to control the SPY sectional engine, consisting of a built-in complimentary LED light and three buttons to operate the automation from outside the box. Includes built-in receiver for Nice.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

Table of manoeuvres Forsa GATE 2 DG to Pylon KAPPA.

Table of manoeuvres Beninca THINKY for 1 actuator for sectional and retractable doors, book doors with more than two sheets, unbalanced blinds, and industrial slides.

» The power supply is 230Vac or 400Vac.

Motor power is 230Vac 900W or 400W 2200W.

Special 220V receiver base for electric locks or electric locks. What. It has a 12Vac outlet.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control.

Table of manoeuvres Forsa-SEA 'Gate 1 DG' for electro-mechanical operators of 230 V. What. The Gate 1 electronic board can be continuously updated and customized when combined with the Jolly Programmer module. Its comprehensive features include a dedicated 8K2 security edge input, encoder and boundary switch support.

The plate has a display to perform parameter configuration and programming adjustment of paths and actuator force.

Table of manoeuvres CAME 801QA-0050 for one or two 24 V electromechanical vibrating motors.

The plant is powered at 230Vac and has a programming and indication display, self-diagnosis of the safety devices, Adaptive Speed & Torque Technology,

Table of manoeuvres Oxygen NEREA for 1 or 2 actuators at 230V for swing doors with 433,92 MHz built-in receiver.

Programming is analogue using buttons and luminous LEDs.

Table of manoeuvres Oxygen URANIA with 433 MHz built-in receiver for 230 V rolling motors.

The KIT contains 2 RollingCode 433.92 MHz controls.

The electronic plate Oxygen URANIA is designed to be installed in engines:

• Center shaft roller shutters

• Tubular motors for household blinds

Table of manoeuvres Oxygen URANIA with 433 MHz built-in receiver for 230 V rolling motors.

The electronic plate Oxygen URANIA is designed to be installed in engines:

• Center shaft roller shutters

• Tubular motors for household blinds

Medva "FULL PRO FC" manoeuvre board for 1 or 2 230V actuators with encoder and electric lock output.

The vehicle shall be equipped with an automatic transmissionfor the operation of industrial sectional doors, sliding or tilting doors with 230 V Triphase motors.

Medva PC190 control panel for 1 or 2 24V to 160W engines, with digital display, connected for 24V electric lock, encoder and force regulation and soft stop.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

Control centre Motorline MC60KVM with output for electro lock EF25.

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible and

Table of manoeuvres BFT "ZARA' with DIP switch and potentiometers for one or two 24 V electromechanical operators for 230 V/80 W swing doors. What. The 433 MHz bi-channel radio receiver has been incorporated.

Torque regulation is electronic with a system for detecting obstacles. What. The force of the doors and the deceleration space can be regulated with the potentiometers.

The main functions include: automatic closure, fast closure, pulse lock on opening and ram strike on opening. What. It is compatible with the EELINK protocol.

Table of manoeuvres BFT "LEO B CBB L01' for single phase PEGASO sectional operators.

Table of manoeuvres BFT "ALCOR' for 1 or 2 230V pulsating operators with built-in receiver.

The control panel has: for use in the manufacture of motor vehicles [1] used in sliding doors, with control of a sensitive bar and the possibility of checking security entrances. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology.

The terminals are colourful and removable to manage the cables with greater agility.

Control panel BFT "WALENA SW2' with DIP switch and potentiometers for one or two operators of 230V/400+400W used in hinged and folding industrial doors, with management of a sensitive bar and the possibility of checking security entrances.

It can manage the deceleration of the gate in both the opening and closing phases. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology. What. The swing doors are colourful and removable to manage the cables with greater agility.

Table of manoeuvres Forsa "PNG-20' 230 V for tilting and swinging doors of 1 or 2 sheets.

Box PNG-20 is provided with a socket to insert radio frequency and traffic light receiver cards.

PUJOL VARIOPASS station with access control at 433.92 MHz, capacity 2,000 codes. Two expandable channels up to 5.

Medva "VERSUS I20ES" triphasic 230/400 V, absolute or end-of-race encoder, with configurable inputs and outputs.

Electronic plate Oxygen CIRCE 230V for residential sliding doors.

Front cover with OPEN-CLOSE-STOP buttons for steering wheels Erreka I LIVE.

Front cover with OPEN-STOP buttons for steering wheels Erreka I LIVE.

Table of manoeuvres DITEC LCU30H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Table of manoeuvres CAME 2ZE5 for tilting engine E456.

Table of manoeuvres Motorline MC50KVM single-phase 230V with up/down/stop pusher developed for the automation of sliding, tilting, sectional and passage barriers.