PUJOL JUNIOR 230Vac single-phase control panel for blinds or retractable doors incorporating a receiver open source radio frequency compatible with PUJOL VARIOCODE transmitters at a frequency of 433 MHz.

Content of the KIT: manoeuvring table PUJOL JUNIOR + 2 controls with cover with code VARIOCODE.

Central command Nice Moonclever, for 24 Vdc swing door gearboxes with magnetic encoder, with technology Nice BlueBUS compatible with the Solemyo solar power system and the Opera system for the management, programming and diagnosis of automations, even remotely.

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors, with a receiver for up to 255 users and a built-in antenna.

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

MC200 is an electronics switchboard enabling the control and operation of a motor for the automation of a blind, or a sliding door, or a sectional door, or a curtain, or other similar applications.

Compatible with the IT4WIFI module to be able to open and close via a mobile device (Android or iOS) thanks to the built-in WiFi connectivity.

Manoeuvre chart for an engine, without radio and LED light indicators at the entrances, ideal for automating center-axle rolling shutters.

Table MONO 1H0 does not include receiver card so we can add a free plug-in card (SRT-255) or an encrypted card (MICRO-TARJ) to use protected controls.

ALLMATIC control unit for one or two motors at 230 VAC. Selection of functions through a display. With obstacle detection and device self-diagnosis. Central controlled by a transmitter via display.

ALLMATIC control unit for one or two motors at 230 VAC. Selection of functions through a display.

Control panel with control of a transmitter via display. Bluetooth module connection not available.

Allmatic manoeuvring chart of the BIOS2 model 24Vfor the control of 1 or 2 blades at 24 Vdc without encoding. Compatible only with ALLMATIC 24V motors.

Box receiver Forsa model CRE800 powered at 230Vac for issuers RollingCode Forsa at 868 MHz, with internal memory of 15 codes (expandable with external memory).

It allows two types of operation: step by step and man present.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

Table of manoeuvres Erreka EPEB AND EPEB-PAL for use in the manufacture of motor vehicles analogue to encoding.

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Table of manoeuvres V2 EASY-LUX for rolling shutters with courtesy led light and buttons.

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Electronic control panel PUJOL JUNIOR E PRO for revolving doors with built-in receiver at 433,92 MHz compatible with transmitters Pujol Various and secure.

Basic Control Panel Clemsa Class 10.1 for hinged doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

" THE MODEL CLASS 10.1 HAS BEEN WITHDRAWN AND IS REPLACED BY THE MODEL CLASS 60 (FOR COMMUNITY SLIDING DOORS OR SLIDING DOORS), OR BY CLASS 10 (FOR RESIDENTIAL SLIDING DOORS) "

Table of manoeuvres V2 CITY9 an analogue 230 V for sliding doors.

" TABLE CITY9 HAS BEEN REPLACED BY NEW FLEXY2 MODEL FULLY COMPATIBLE "

Analogue maneuvering chart V2 CITY11 230 V for swing lamps (one and two sheets).

Table of manoeuvres V2 EASY-TOP digital 230 V for rolling shutters.

Table of manoeuvres V2 EASY-BASIC an analogue 230V with built-in receiver for roller shutters.

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Container FAAC Model E for electronic cards

Operating table or replacement electronic plate DEA model of the vehicle for sectional motors DEA SPACE 702S of 24 V.

Table of manoeuvres BFT ALPHA SD for sliding doors and shutters. What. For residential use only, both in households and communities of owners. The functions can be programmed by LCD screen. It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed.

" THIS ELECTRONIC PLATE IS OUT OF CATALOG. THE NEW PLATE REPLACES IT SHYRA CPEM FULLY COMPATIBLE "

Table of manoeuvres DEA NET230N with built-in receiver, universal with digital display for 1 or 2 motors at 230 V, with or without magnetic encoder.

Single-step selection of the engine type used (slide, swing, swing, barrier, sectional door, pylon), with automatic configuration of all inputs/exits and usage parameters.

Table of manoeuvres TMP for the 24V LOW range of hydraulic motors incorporating a built-in 433,92 MHz receiver compatible with the controls TMP TRIM and LINK.

Three-phase control panel Pujol The Master Pro III at 230 V/400 V.

Control panel for one 230 V retractable drive. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

Control panel for two 230 V retractable actuators. What. Power supply 230 Vac 50-60 Hz. Maximum load of the motor 1000 W. Power lock output 12 V 2A.

Manoeuvre table for rolling shutter with built-in receiver for open source evolutionary 433,92 MHz designed to operate blinds in a simple and intuitive mode from 230 Vac up to 1000W.

An outlet for the complimentary light is provided and allows to connect photocells at 12/24V.

Table of manoeuvres Aprimatic A40DG designed to control one or two motors at 230V up to 800W per motor.

Multifunctional module for opening pedestrian doors by command.

Multifunctional module for opening pedestrian doors by command. Includes receiver module + 2 Falk controls.

In the case of vehicles of categories M1 and N2 for a single leaf and for running ones.

Digital control panel 230V with encoder V2 CITY1-EVO for one- or two-leaf clover and slippers.

Table of manoeuvres Forsa SWING 2 DG for doors with one or two motors at 230 V.

Table of manoeuvres Forsa "FOR M-22' for one- or two-bladed reciprocating engines residential or community use. Includes built-in 500-code receiver.

Electronic card FAAC E045 for one or two 230V motors.

Electronic card FAAC E145S for one- or two-bladed sliding doors and 230 V sliding motors.

End of race Erreka Bull KM1800 with Hall sensor.

HYDOM QMB2 manoeuvre box for 1 motor to 230V, with force regulation and soft stop at the end of the opening and closing manoeuvres, the ease of programming and the luminous indicators in the control inputs makes it very versatile and practical for most automatisms.

The center includes inputs for end of race, electrolocking, garage light, photocells and segurine bandsd.

Electronic switchboard Motorline MC75 for indoor roller shutter motors and indoor tube shutter motors. What. It incorporates a 433 MHz RollingCode receiver with a capacity of 30 codes.

Universal control panel with screen for one or two operatorswith sliding or sliding doors, 230 V/650+650 W or 230 V/750 W power supply.

Basic Control Panel Clemsa CLAS10 for tilting doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

Manoeuvre chart Erreka CLEVER03 for sliding and tilting doors analog 230Vac with soft stop option and end of run.

Plant developed to work with three-phase motors from 400Vac to 1500W. What. Ideal for use in STARK, KVM115 and KVM2020 engines.