Pujol SENIOR II PRO 230V control panel for 2-leaf swing doors, with receiver for up to 255 users and built-in antenna.

Electronic panel designed for single-phase motors of up to 3/4 of HP of power, and can be used in installations with one or two motors.

The engine power can be adjusted with a potentiometer, and the soft stop time at the end of the manoeuvre.

It allows various combinations through an 8-position micro-switch and a 1-position selector.

The timings on the motherboard are: timeout on auto-close, open time and close time, the opening and closing timings can be doubled by a microswitch selection.

On the motherboard there is also a potentiometer to regulate the motor force, another to select the soft stop time, another 'Def1' for the offset between motor 2 and motor 1 at opening, and another 'Def2' for the offset between motor 1 and motor 2 at closing.

The panel incorporates the limit switch inputs of the second motor for the shutdown of the second engine.

All pushbutton inputs are protected with Zener diodes, and have a light indication with LED diode that tells us if the input is activated or not.

It offers the possibility of a radio card, to work with remote control.

Protections: Power input protection by means of a 250mA fuse and a 275V varistor.

Zener diode control inputs.

Protection of the motors by means of 6A fuses.

Connection of the motors to step by '0', without sparks in the relay contacts.

CHARACTERISTICS

• 230Vac single-phase control panel.
• Built-in receiver for 250 codes.
• Option for plug-in receiver card.
• Compatible with VARIOCODE Pujol Emitters.
• Force regulation and soft stop with potentiometers.
• Built-in antenna.
• Configuration of offsets between Motor 1 and Motor 2.
• It has a connection for electro locks
• Fuse protections.