Table of manoeuvres Pujol JUNIOR CLICK with radio brake release for retractable doors. What. Electronic plate with built-in receiver at 433,92 MHz compatible with VARIO transmitters with a capacity of 100 codes.

Electronic chart EMFA CRF MINI with force regulation for electromechanic.

Electronic control panel EMFA CRFEM with force regulation for electromechanical + hydraulic.

Table of manoeuvres Aprimatic A40BS for 1 or 2 36V Brushless hydraulic operators with absolute position encoder.

Table of manoeuvres Aprimatic BT40 DG for 2 electromechanical operators 24Vdc with or without running ends. What. Programming of parameters by LDC screen.

Table of manoeuvres Aprimatic A80DG for electro-mechanical sliding door operators at 230 Vac with running ends. What. Self-learning and parameter programming by LCD screen.

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230Vac with running ends. What. Anti-crush function by torque limitation.

Control panel programmable for one or two switches with 230V switching power supply. What. Stand by system.

Maximum load of the motor 800 W. Power lock output 12/24 V dc/ca. Output of accessories 24V DC.

Operating logicsemi-automatic, automatic, semi-automatic step by step, automatic step by step, automatic safety step by step, man present. Pause times, soft stop, delay opening time programmable.

Control panel Clemsa Class 62.C for sliding door actuators 230 V to 700 W. What. Soft stop and anti-crush system with encoder. Connections for garage light and traffic card. Supply voltage from table 230Vac. Programming by display.

Control panel Clemsa CLAS 60 V programmable with switch allowing installation of three-phase drives to doors where only 230 V single-phase power supply is available.

Control panel Clemsa CLAS 60 T for sliding and tilting drives with 380V or 230V 3Ph supply. What. Maximum operating power 1200W. Programming by display.

Control panel Clemsa Class 30.1 for the actuation of 24Vdc sectional roof doors. What. Residential use. This is a manual/automatic/semi-automatic.

Control panel Clemsa CLAS25 for 24V tilting and sliding actuators. What. Maximum operating power 150W. Programming by pulse.

Table of manoeuvres Pujol SENIOR 1 analogue for swing doors with electric lock output.

Other, of circular cross-section DEA NET230.

The MC50 is a 230V single-phase electronic switchboard developed for the automation of sliding doors, sectional doors and barriers.

Central Motorline MC60 developed to work with 1 24Vdc motor, with maximum power of 120W each. It also includes the following characteristics:

Central Motorline MC70 230Vac for TUB and Rolling motors up to 500W.

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V ideal for swinging, sliding or swinging doors.

Table of manoeuvres Motorline 230Vac MC52 developed to use 2 vibrating motors up to 500W per motor.

Central command Nice DPRO924 for 24V sectional door motors, other, of circular cross-section, suitable for Sumo.

Digital integrated chart Erreka THE ZEUS ZE230EC a voltage of 230 V with display

Notes: does not include receiver has to be added additionally and you will find it in the product accessories.

Painting Nice D-Pro 500 for single-phase 230V or three-phase 400V motors with mechanical and electronic running ends.

This is a universal maneuver chart DEA NET24N with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

Control panel for sliding doors and barriers with 1 motor 24Vdc. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

Control panel for sliding doors and barriers with 1 motor 230Vac. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

If the vehicle is equipped with an electric motor, it shall be equipped with an electric motor.

Designed for use in GEARBOX engines.

Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Control panel CAME ZL OF 24V with a graphic display for swinging candles.

Control panel CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Control panel CAME ZM3E multifunction 230V for two-bladed displays signalling graphics, self-diagnosis of safety devices and built-in radio decoding.

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Table of manoeuvres Nice MC800 for 230 V swing door motors with BlueBUS technology and Opera system.

With technology Nice BlueBUS, compatible with the Opera system, for the management, programming and diagnosis of automation, also remotely.

Compatible with the Opera system which, through the O-View multifunction screen, allows you to customize the system by modifying the opening and closing positions, the leaf gaps and decelerations, changing for each motor parameters such as, for example, force, speed, sensitivity to obstacles.

This is a universal maneuver chart DEA NET24N/C with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way.

Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Range of maneuvers Erreka VIVO to power sliding, sliding or tilting doors with 1 or 2 actuators at 230Vac or 24Vdc.

VIVO frames do NOT incorporate a built-in receiver, but are iRRE2 and IRRE2/250 plug-in receivers are compatible to be operated by radio frequency with KUMA or IRIS transmitters.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters.

BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

Analogue chart Erreka CLEVER01 230Vac for rolling shutters, with outlet power for peripherals 24Vac and programmable auto-lock settings.

The CLEVER01 manoeuvring frames are designed to be part of rolling door automation systems, driven by a single-phase motor with permanent condenser. The actuator shall have running ends.

PUJOL JUNIOR control panel for roller shutters incorporating a receiver open source radio frequency compatible with PUJOL VARIOCODE transmitters with a frequency of 433 MHz

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race.

Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Programmable control panel. Rolling and sliding actuators 230 V or 400 V. Max. 1500 W.

The Control Panel Clemsa CLASS 5 is designed to govern automatic doors of intensive use, sliding, tilting and folding type with 1 and 2 blades, with single and three-phase drives of 230 V AC or 380 V AC and up to 1500 W of power.

Table of manoeuvres Erreka Digital SMART-D201 for 1 or 2 motors pulsing at 24Vdc and electric lock output.

The SMART-D201 table is valid for DC motors: TEMIS, KAIROS and ARES.

Gearbox for 2 engines powered at 230 Vac in a simplified version with integrated radio, designed for the control of two motors (hydraulic or electromechanical), allows to program different times of gaps in opening and closing, force regulation and programming of the soft stop at the end opening and closing maneuver, incorporates light indicators in the control inputs.

Control panel with built-in receiver Clemsa CR81 (433 MHz) or CR81.8 (868 MHz) for retractable closures.

Control panel Clemsa CLAS 60 for rolling and sliding actuators 230V. What. Maximum operating power 1000W. Programming by display.