List of products by brand Nice

Table of manoeuvres Nice SP081-B control center electronic card A824.

Central or maneuvering frame Nice SOON reference SPSOA2R10 compatible with the former central Nice SOA2.

Electronic plate Nice McA2 designed to work in 24VDC engines For folding doors, it includes an integrated receiver and battery entry Type PS124.

Central command Nice SPYBOXBHS with courtesy LED light for sectional engine SPY650HS and SPY800BDKCE.

Central command Nice SPYBOXB independent to control the SPY sectional engine, consisting of a built-in complimentary LED light and three buttons to operate the automation from outside the box. Includes built-in receiver for Nice.

The Nice Rbskitsafe1 It is an official accessory kit designed to integrate directly into the housing of sliding door engines Nice Robus, like the models RBS400, RBS600 and RBS600HS.

This kit allows to improve the Security, aesthetics and visibility of the installation, incorporating the photocells and the courtesy lighting in a clean and protected way within the engine itself.

The kit includes the necessary accessories to accommodate the Compatible safety photocells, like the models Nice Epmor or EPMOB, directly in the body of automatism. Thanks to this system, the photocells are better protected against blows, dirt or external manipulations.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Bidirectional radio transmitter Nice 3-channel Wall Domì W3C

Domì P6SV is a 6-channel portable radio transmitter for tubulent shutters and brand awning engines Nice.

Radio transmitter Nice ERA P VIEW multifunction with intuitive graphical interface, to manage up to 99 teams individually or in groups.

Era P View is a multifunction radio transmitter belonging to the “Era-P” family Nice; is intended to command automations for awnings, solar screens, blinds, gates and gates, lights and electrical appliances in general. In addition, it serves to activate and deactivate the Home System alarm system Nice.

Nice Domip1 | Transmitter for blinds and awnings

The Nice Domip1 is a radiofrequency transmitter of a channel Which is part of the Domi series, designed To control blinds, awnings and other brand automations Nice. This model, released in December 2024, replaces the oldest models was P1 and Ergo1.

NICE ROA40 electronic plate for sliding motor ROX600 and ROX1000 with built-in receiver.

Electronic plate Nice SPRBA4R10 for sliding engine ROAD400 (current model). It incorporates a 433 MHz receiver.

Compatibility: This control panel is suitable for those engines Nice ROAD400 manufactured from March 2018.

NICE ROA37 manoeuvre chart for sliding engine THOR 1500, incorporating a receiver with RollingCode 433,92 MHzcompatible with FLOR and SMILO emitters. The programming is analog using micro dip switches.

Motor for heavy sliding doors up to 1500 kg, Designed for non-intensive use in large industrial and residential facilities.

The Nice Thor1500 It is a robust automation to 230v Ideal for large metal gates, offering power, reliability and silent operation even under demanding conditions.

It's called NICE SPIN30 SNA3/A, ideal for engine replacement OTHER and OTHER.

Plastic motor sectional housing Nice THE FOLLOWING INFORMATION SHALL BE PROVIDED:.

Painting Nice D-Pro 500 for single-phase 230V or three-phase 400V motors with mechanical and electronic running ends.

Central command Nice DPRO924 for 24V sectional door motors, other, of circular cross-section, suitable for Sumo.

Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

The Nice Bidi-wifi ext It is a kit designed to expand Wi-Fi automation connectivity Nice Installed in areas where wireless coverage does not reach the control plant correctly.

This system allows you to connect automatisms Nice, such as garage doors, automatic gates or doors, to the Wi-Fi network and applications Mynice and Mynice pro, facilitating the configuration, control and management of automatism from mobile devices.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Engine Nice RUN HS for the rapid actuation of switches for use in the manufacture of motor vehicles 1.200kg.

Rapid opening and closing maneuvers: RUN400HS opens a 4 m canopy in approximately 6* seconds, while RUN1200HS opens a 7 m canopy in approximately 18* seconds.

Replacement electronic plate Nice OTHER for the engine THEFT 300.

Replacement towing vehicle Nice SHEL50 AND SHEL75.

Dented helicoidal motor reducer Nice SPIN with output shaft.

Timing belt for sectional engine Nice Spin at 6m or 8.5m with a thickness of 10mm.

Motor gearbox Nice SP6000 SPA03R04

Table of manoeuvres Nice OGA0 to 24V for SHEL50KCE, SHEL60KCE and SHEL75KCE sectional motor. What. The plate has a built-in receiver at a frequency of 433.92 MHz and functions of automatic shutdown, motion regulation and reversal of motion in case of obstacles during travel.

Motor housing Nice SHEL50 and SHEL75

Signal lights Nice With fixing by fitting on the upper or lower side of the mast. Length 6 m.

Traffic lights Nice with anchorages at the top or bottom of the mast. Length 4 m.

KIT Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

Content of the KITThe following: ROAD 400 sliding motor, FLOR2RE emitters, EPM photocell, and four feet of nylon zipper.

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of one sheet).

Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Spin 650N NICE engine for sectional doorss up to 8,8m2 and swings up to 9,8m2.

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

High speed motor Nice Spykit 650 HS BD with two-way control for sectional doors up to 10,5 m2 and for overhead and non-overhead sliding doors up to 11,5 m.

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 10,5 m2 (SPY650) and 12,5 m2 (SPY800), for tilting, overflowing and non- overflowing doors, up to 11,5 m2 (SPY650) and 14 m2 (SPY800).

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2, and swings up to 9,8 m2.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

New 600N NICE SPIDO engine with integrated central and receiver. For sectional doors up to 9.6 m2 and tiles up to 10.5 m2.

Remote control with the MyNice Welcome app Nice Core Wifi gateway to manage all your automatisms.

Motor head Nice SPIDER 800N Brushless + 2 MYGO4

* Does not include Guide. The engine head is designed for replacement.

Motor Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice app, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Electromechanical engine NICE model TOONA 5external mounting for residential swing doors with blades up to 5 metres. Also available in 24Vdc version, with magnetic encoder.

24VDC electromechanical gearmotor Nice Titan HS with magnetic encoder For the quick drive of swing gates with leaves of up to 3.7m (TTN3724HS, TTN3724RHS), and for leaves up to 6m (TTN6024HS, TTN6024RHS).

Electromechanical gearbox engine 24 Vdc Nice TITAN HS with magnetic encoder for use in the manufacture of motor vehicles up to 3,7 m (TTN3724HS, TTN3724RHS), and for sheets of up to 6 m (TTN6024HRS, TTN6024HRS) AND.

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.