KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Easy: it is enough to loosen a single screw to remove the plastic cover and access the terminals for the electrical wiring.

Strong: automation composed of two strong aluminium castings that guarantee perfect resistance to torsion and cutting forces.

Practical: manual unlocking ensuring opening with minimum effort and removable cover for easy access to the screw for adjustment and maintenance operations.

TECHNICAL CHARACTERISTICS

• Electromechanical automation: irreversible for sheet up to 2,5 m
• Running management: mechanical cap
• Maximum capacity: 400 kg by 1.5 m
• Power supply: 24 Vcc
• Maximum power: 5A
• Consumption: 55 W nom. / 120W maximum
• Push: 2000 N
• The test shall be carried out in accordance with the instructions of the manufacturer
• Maximum clearance: 350 mm
• Maximum aperture of the vehicle
• Intermittency: 30 consecutive cycles at 20°C
• Service class: frequently tested up to 150,000 cycles
• Unlocking for manual opening: by key
• Operating temperature: -20°C ÷ +55°C (-35°C ÷ +55°C with NIO activated)
• Protection degree: IP44
• Weight: 7,8 kg

INSTALLATION MEASURES

MOTOR MEASURES

THE KIT CONTAINS:

■ 2 units PWR25H: 24V electromechanical operator 2.5m by sheet.

■ 1 unit OF WHICH:: 24V operator central with built-in receiver.

■ 2 units TECH3Rolling code 433 MHz.

■ 1 unit FTALL: pair of emitter-receiver photocells.

MANUAL

Instruction manual DITEC IT'S THE SAME THING

Instruction manual for central electronic BIOS2 24V