List of products by brand Clemsa

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

Replacement of sectional motor tractor Clemsa AS60 & AS120.

Resistive safety band 8K2 Clemsa with a length of not more than 20 mm.

The safety belt is an anti-crushing system, which reverses the engine manoeuvre in case of contact with the soft rubber. It is installed on edges that can trap people or objects that may be accidentally encountered in the path of automation.

Totem for installation of accessory equipment at access points for passenger carsfor the purposes of this regulation, the following definitions shall apply:.

Surface element installation plate for the installation of embedded devices. On the inside disone of installation trays, support for installation of dIN rail and cable guide.

Wired receiver Clemsa Mastercode "RMV 2U" 12/24V 433 MHz with two channels.

The universal receiver 'RMV 2U' is fed to 12/24V ac/dc to be able to be connected in any manoeuvring frame which has an alternate button output.

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

Other, of circular cross-section Clemsa Mastercode "RMV 2" 433 MHz with two channels.

The receiving card 'RMV 2" connects directly to manoeuvring frames Clemsa have at their disposal connection 4 pins which allows us to connect directly to the circuit board without the need for wiring.

Software engineer Clemsa PT8 for facility management by Software SW8 for the management of Mutan-II and MutanCode systems via Smartphone (Android).

Key unlocking vibrating engine Clemsa AH, THIRTY.

The unlock key will allow us to unlock the engine so we can open it manually in the event of a power failure.

Decoder card CLEMSA TD420/U RFID MUTANcode 400 users for connecting readers CK40/42and external RET antennas in transmitters and receivers.

Control of self-contained RF/RFID access Clemsa MC1500/1800 (issuers and keys). It incorporates a TD420 decoder card.

Selector Clemsa opening and closing (NO/NC) button with custom key, one contact (SA10) or two contact (SA20).

The outer receiver Clemsa Mutant code RN44 is the most versatile of the family of Clemsa, and a width of not more than 50 mm, with a power supply of 230 Vac or 12/24 Vac/dc. Frequency 433.92 MHz or 868 MHz.

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Reversible electric lock EC113. What. Adjustable input of 50 to 70 mm. What. Food 12V ac/cc. What. Inner and outer bulb 60 mm.

Electric lock applicable to interior and exterior doors and gates, ideal for folding/sloping doors.

RFID proximity card from Clemsa for the readers CK40 and CK42.

External unlocking with 1.5 m cable and lock Clemsa AS 60/120

This is a universal receptor, wired and powered at 12/24V up to 400 users with 2 channels a frequency 433,92 MHz or 868 MHz.

Facility manager via PC and SW 7 software (including) MUTANcode and MUTAN II systems. This is database management. Issuers N, NT and T.

" THE PT7 MODEL HAS BEEN REPLACED BY THE PT8 MODEL WITH NEW FEATURES "

Advanced MUTANcode programmer which allows RIFD management. Facility management by PC for access control.

MUTANcode and MUTANcode remote controls via PC and SW 3 software (Included).

" THE CLEMSA PT4 PROGRAMMER HAS BEEN DELISTED FOR THE HIGHER PERFORMANCE PT8 MODEL "

Adapter for new cards Clemsa Master code RMV and mutant code RNE248.

Table of manoeuvres Clemsa 24 Vdc for sectional doorss residential, ideal for replacement of the AS60/AS120 engine.

Memory Clemsa TM400 MUTANCODE of 400 users.

Compatible with frames and receivers Clemsa from the MUTANCODE series.

Magnetic key recorder Clemsa CO 9 U 17 to code LK 10 and AD 6.

The CO 9 U 17 recorder has been developed and designed to record the codes on the LK 10 and AD 6 Magnetic Keys manufactured by CLEMSA, so that they are operational with the CK series Magnetic Contact Locks and Multicode Magnetic Key Readers, depending on the key model.

Garage crew Clemsa model MUTANcode N82 two channel, RollingCode 868 MHz.

" This model has been replaced by the model MUTANcode N82M "

Issuer Clemsa Subject to the following conditions: 2-channel, unmatched 868 MHz Rollingcode system with a sleek and minimalist design.

The command Clemsa MTH2 is an original compatible controller for 8-digit binaries and trinaries compatible with the vast majority of 433.92 MHz and low frequency off-the-shelf controllers.

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

Replacement rear fork Clemsa A300/400.

Anti-vandal switch 230V/24V with custom key

Garage crew Clemsa Mutan-II model NT 2 of 2 channels at 433,92 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer NT2 has been replaced by the model N2S OF THE SAME CHARACTERISTICS "

Garage crew Clemsa Mutan-II model NT 82 of 2 channels at 868 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer Clemsa NT2 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT82S of the same characteristics"

Machinery for making pulp of fibrous cellulosic material, where one of the doors shall be fixed so that it is blocked by the top of the ground bolt.