Cushioned butt Erreka NMTOP for sliding doors with dock
14,52 €
Bused Stop Erreka Nmtop for sliding doors, with Absorption pier, top rubber and galvanized steel base. Approximate measures: base 80 × 30 mm, height 90 mm and Ø30 mm stop. Indicated as Physical opening or closing stop.
We ship your order within 24/72 hours
Secure payment: Card, Bank transfer, Bizum
Fast shipping from Spain Except bulky
Bused Stop Erreka Nmtop for sliding doors
The Erreka Nmtop is a Damaged physical stop using pier Designed to limit the tour of sliding doors.
Your system incorporates a Metallic pier and a rubber top butt, allowing you to absorb part of the impact when the door reaches the end of its route.
The base is manufactured in galvanized steel And it has holes to make its fixing on a suitable surface.
Is especially useful as Mechanical safety stop in opening or closing, Avoiding the leaf to continue moving beyond the expected route.
Mechanical stop with damping
Unlike a conventional rigid stop, the NMTOP incorporates a dock It helps absorb the impact of the door when you reach the end of the tour.
The upper rubber element comes in contact with the sheet, reducing the straight hit against a metallic piece.
Main features
✓ Shoulder stop for sliding doors.
✓ Reference Erreka Nmtop.
✓ Damping system by metallic pier.
✓ Top top of rubber.
✓ Base manufactured in galvanized steel.
✓ It can be used as Physical stop in opening or closing.
✓ Helps reduce the impact of the sheet at the end of the route.
✓ Adequate for both new installations and for Replacement or improvement of existing stops.
Characteristics and measures
| Feature | Information |
|---|---|
| Manufacturer | Erreka |
| Reference | Nmtop |
| TYPE | Damaged physical stop |
| Application | Sliding doors |
| Base material | Galvanized steel |
| Base | 80 × 30 mm |
| Distance between fixings | 70 mm |
| Approximate height | 90 mm |
| Diameter of the butt | 30 mm |
| Damping | Dock |
Where is it installed?
The stop is installed in the Final point of the door travel, so that the blade comes into contact with the rubber piece when it reaches the desired maximum position.
Can be placed at the end of Opening or closing, depending on the features of the installation.
In certain facilities they can be used two units, one for each end of the route.
IMPORTANT: Fixing the stop
The stop must be Firmly fixed to a resistant surface And correctly aligned with the contact area of the door.
It should be used as a mechanical element of end of travel and does not replace the electrical or electronic security systems that correspond to the installation.
Compatibility
The Erreka Nmtop It is a mechanical accessory and, therefore, does not depend on an electrical connection with the engine.
Can be used in different sliding doors provided that The dimensions, position and fixing system are suitable for installation
Supply content
■ 1 × Cushioning Erreka NMTOP Covered with pier and fixing base.