The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Garage control Entrematic model ZEN4, Rollingcode at 433.92 MHz of 4 channels.

The ZEN4 model replaces the old model DITEC Gol4.

Garage crew Sommer 4050V 2-channel with a quartz frequency of 40.685 MHz and programming by combination of dip-swtiches is therefore configured by placing the corresponding combination of digits.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Garage crew Telcoma EDGE two channel rolling code 433.92 MHz.

I'm going to have to go model IRIS it is a 4-channel format, RollingCode 433.92 MHz.

4 channel remote control Somfy model Keygo RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

2 channel remote control Somfy model Keytis 2 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

Garage crew Clemsa Mutan-II model NT 82 of 2 channels at 868 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer Clemsa NT2 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT82S of the same characteristics"

Garage crew Clemsa Mutan-II model NT 2 of 2 channels at 433,92 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer NT2 has been replaced by the model N2S OF THE SAME CHARACTERISTICS "

Tripartite fixed-code transmitter at 433,92 MHzand programmable by coding a Dip-Switch on the back cover.

GO DMIL garage transmitter with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

Go garage command JCM a frequency of 868 MHz with code Doors New Castile.

Garage crew Forsa model TP2 Mini with RollingCode coding system at 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Garage crew Clemsa model MUTANcode N2 this is a 2-channel mini format, RollingCode 433.92 MHz.

Issuer AERF Ground C4 with channels 2-8-4-E RollingCode frequency 433.92 MHz.

Allows the use of up to 5 channels by pulsar combination

Issuer V2 electronic equipment model PHOX-4 with RollingCode coding system at 433,92 MHz for receivers V2 with standard code.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

Garage control V2 Able TX Toh2 433,92 MHz

TECH3 transmitter with HR MATIC code with RollingCode 433,92 MHz.

The TECH3 emitters are elegant, robust, miniaturized and feature-rich. Powered by a long-lasting CR2032 type 3V lithium battery.

Issuer Motorline falk model with RollingCode coding system at 433,92 MHz for receivers Motorline or RollingCode open source receivers.

Electronic command bi-technology HF 2 channels for GRPS access control receivers.

Garage crew TMP Link coded RollingCode, standard code (not personalised) and frequency 433,92 MHz.

High-power RollingCode 433.92 MHz transmitter ideal for use with the "Long Range Receiver Kit up to 300 meters".

Garage crew Erreka Two channel IRIS, rolling code at 868 MHz.

ESMISER ELEMAT MODEL TEC-2 GO ROLLINGCODE TYP TO 868 MHz.

6Garage issuer ROPER MR-2 with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

Electronic command bi-technology HF 4 channels + built-in RFID for GRPS access control receivers.

Garage command "XL AUTOMATISMOS" model MERCURI A8 VOLT coded Rollingcode (evolving) 3 independent channels at 868,35 MHz

Issuer Nice It was Inti model "INTI2" of 2 channels at 433.92 MHz in black.

I'm going to have to go model IRIS the two-channel format, RollingCode 433.92 MHz.

Garage emitter BFT Two channels, rolling code at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

HYDOM transmitter model ST3-HD3 3 button, rolling code at 433.92 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Garage crew Nice SMILO two channels RollingCode 433.92 MHz.

This emitter is supplied with a standard code which can be memorised on the receiver by radio or manually according to the corresponding instructions.

Product discontinued by the manufacturer. Not available for sale.

This model has been officially replaced by a more current version, which incorporates technical and functional improvements.

👉 Recommended substitute product:

I send FAAC XTO2 SLH DS 868 MHz 2 channels

Garage control DEA Gtx2, 2-channel RollingCode often 433.92 MHz. Standard code. The activation must be carried out in the receiver.

Issuer FAAC XT4 SLH 4 channels and frequency 868 MHz.

The programming or memorization of the new emitter shall be performed by proximity or confrontation from an original operating control.

* Special prices for professionals. Contact us to open your file.

Transmitter Aprimatic of a frequency of 433.92 MHz compatible with the APRICODE coding system with dynamic code generation and three levels of programming enabling it to broadly meet the security requirements of both residential and collective automated accesses.

Garage crew CAME model TOP-432EE with two channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

Parking issuer PUJOL MUNTALA model BLACK VARIOCODE with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Issuer Nice It was Flor's 2-channel "FLO2RCE" model at 433.92 MHz with multiple insertion sequential coding.

Garage emitter BFT, four channel MITTO model, RollingCode at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).