Garage crew Clemsa model MUTANcode N2 this is a 2-channel mini format, RollingCode 433.92 MHz.

Issuer Nice It was Flor's 2-channel "FLO2RCE" model at 433.92 MHz with multiple insertion sequential coding.

Issuer Nice It was model flower "Flo4re"4 channels at 433.92 MHz with sequential encoding multiple insertion.

Garage crew Nice SMILO two channels RollingCode 433.92 MHz.

This emitter is supplied with a standard code which can be memorised on the receiver by radio or manually according to the corresponding instructions.

Issuer Nice It was Inti model "INTI2" of 2 channels at 433.92 MHz in black.

I'm going to have to go model IRIS the two-channel format, RollingCode 433.92 MHz.

Garage crew Sommer PEARL 4018 with 4 channels and frequency 868 MHz and 128-bit SOMloq2 signal transfer system.

Garage command "XL AUTOMATISMOS" model MERCURI A8 VOLT coded Rollingcode (evolving) 3 independent channels at 868,35 MHz

1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Garage crew PPA the frequency range of the radio spectrum shall be as follows:.

Garage crew JCM 4 channel RollingCode coded at 433 MHz.

The emitter has a stand and keychain.

Garage crew CAME the model TOP2DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

Garage crew CAME model TOP4DRBS Rollingcode frequency 433,92 MHz and 868 MHz.

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Garage crew MEDVA model of the vehicle with 3-channel RollingCode coding at 433.92 MHz.

Garage crew FAAC TM2433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM1433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew Forsa model TP2 Mini with RollingCode coding system at 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Issuer Clemsa NT1 health care two-channel, unmatched Rollingcode 433.92 MHz system with a sleek and minimalist design.

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Microwave sensor for opening automatically closed doors, thus avoiding touching on handles and thrusters. It can be applied to any automatic door, to ensure convenient and safe access.

High-power RollingCode 433.92 MHz transmitter ideal for use with the "Long Range Receiver Kit up to 300 meters".

Garage emitter BFT Two channels, rolling code at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

Garage crew JCM two channel RollingCode at 433 MHz.

The emitter has a stand and keychain.

2 channel transmitter JCM MINI, rolling code type GO is 868 MHz.

Elemat model TEC-2 mini type GO RollingCode transmitter at 868 MHz.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Transmitter Aprimatic of a frequency of 433.92 MHz compatible with the APRICODE coding system with dynamic code generation and three levels of programming enabling it to broadly meet the security requirements of both residential and collective automated accesses.

NICE Era One LR bidirectional long range 433 MHz with 4 buttons: 3 radio channels and 1 button to request automatic status.

NICE transmitters were One BD bidirectional of a kind used in motor vehicles: 3 radio channels and 1 button to request automatic status.

Radio frequency 433,92 MHz with rollingcode encoding, enabling code management, self-learning with 192 Bit encoding, also compatible with encoded receivers Nice O-code floor. The two-way Era One remote is compatible with previous versions of plug-in and external receivers Nice, operating in one-way mode.

Garage command Emfa MTCH4 channel Rollingcode at 433 MHz for the new Emfa receiver series.

Issuer V2 electronic equipment model PHOX-4 with RollingCode coding system at 433,92 MHz for receivers V2 with standard code.

Garage control of the CLEMSA brand, model MASTERcode MV12 two green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Parking issuer PUJOL MUNTALA model BLACK VARIOCODE with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Garage emitter BFT, four channel MITTO model, RollingCode at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 5 channel frequency 433,42 MHz.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 1 channel at 433,42 MHz.

Garage crew DEA model GT-4, RollingCode frequency 433.92 MHz with 4 channels.

Garage crew KEY 4 channel PLAY at 433.92 MHz with RollingCode type Keeloq coding.

Programming shall be carried out on the receiver button according to the instructions in the manual.

Garage crew DEA model GTI2M, 2 channel RollingCode at a frequency of 433.92 MHz.

Self-programmable model of standard code with the possibility of activation on the receiver or with a pre-programmed control.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Garage crew Hormann RSC2 EcoStar 2 channels with a frequency of 433,92 MHz.

Pro'sKit flat ceramic screwdriver 1PK-034ND is a screwdriver with the edge made of zirconium dioxide. What. Pro'sKit 1PK-034ND ensures maximum safety at work, as it is thermally and electrically insulated, antimagnetic and antistatic.

Garage crew TMP Link coded RollingCode, standard code (not personalised) and frequency 433,92 MHz.

6Garage issuer ROPER MR-2 with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

The SLIM SWITCH is a «contactlessuls Pusher for automatic door opening in narrow profile format.

Width of 40 mm suitable for placing in the door frame. The detection distance is up to 30 cm.

It has LED lighting to be seen even in the dark.