Electronic command bi-technology HF 4 channels + built-in RFID for GRPS access control receivers.

Electromechanical actuator kit with 230Vac articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Motor articulated arm Erreka Other, of circular cross-section

Forward handhold for HyDom engine model Lineal 250

Handrene backup 160mm Linear Hydom Motor

Push head with metal housing for HyDom series throttle motors

Hydraulic lock 1 pump

Hydraulic lock 1 pump + rack hydraulic connection

Hydraulic lock double valve + hydraulic connection

KIT Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

Software engineer Intratone for proximity keys, remote controls and read/write memory cards. What. USB connection in Windows and configuration through web admin panel.

RFID proximity key reader and decoder Intratone (read-write) for use with a portable programmer (NOT INCLUDED), to manage ups and downs through an administration panel by connecting the programmer to the USB port of your Internet-connected computer.

To make recordings of user keys, high or low, the programmer would need to be connected (12-0115-SP) to a USB port on our computer and through the manufacturer's web portal.

Anti-vandal switch 230V/24V with custom key

The INTRABOX ECO DATA LECTURE module is a GSM receiver and decoder, with a wireless (wireless) installation for RFID key opening. This GSM receiver includes a SIM card with 3G connection that allows remote management from anywhere in the world.

ALLMATIC control unit for one or two motors at 230 VAC. Selection of functions through a display. With obstacle detection and device self-diagnosis. Central controlled by a transmitter via display.

Allmatic manoeuvring chart of the BIOS2 model 24Vfor the control of 1 or 2 blades at 24 Vdc without encoding. Compatible only with ALLMATIC 24V motors.

Electromechanical engine Forsa SATURN at 230 V for residential sliding doors up to 1000 kg

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

I command Aprimatic Revolux Wireless with one channel for tube or pipe engines series Aprimatic The Revolution.

Resistive safety band 8K2 Clemsa with a length of not more than 20 mm.

The safety belt is an anti-crushing system, which reverses the engine manoeuvre in case of contact with the soft rubber. It is installed on edges that can trap people or objects that may be accidentally encountered in the path of automation.

Chain or guide for motor Erreka ZETA a two-piece sliding or sliding door.

Engine Clemsa for use in the manufacture of products falling within heading 8471 (AC424N) or 800kg (AC824N), with built-in control panel.

Hydraulic operator Aprimatic FORTY 4 for swing bars one or two leaves, residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operators Aprimatic FORTY 4 for swing bars of two leaves for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Kit Electromechanical motors Medva PW200 24V for swing doors for residential use up to 2.5 meters per sheet.

Mechanical power supply for residential use swing doors leaves up to 3,5 metres.

Kit Electromechanical motors Medva PW230K 24V for swing doors for residential use for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

All barriers powered by 230Vac motor, the possibility of saving in memory 99 RollingCode codes of full opening with deceleration in closing and opening.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

The new TOGO remote goes from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Electromechanical motor of 24 V dc MEDVA PL1000 for sliding doors of residential use up to 1000 kg with built-in receiver box and 2 RollingCode controls.

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

ERA Keypad is a 12-key digital selector/keyboard wired for embedding, also with connection technology Nice This is BlueBUS.

External unlocking with 1.5 m cable and lock Clemsa AS 60/120

Hydraulic motor HYDOM MINIMAX for heavy use thanks to its heat-cooled aluminium tank, for oversized two-bladed swing doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Basic Control Panel Clemsa Class 10.1 for hinged doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

" THE MODEL CLASS 10.1 HAS BEEN WITHDRAWN AND IS REPLACED BY THE MODEL CLASS 60 (FOR COMMUNITY SLIDING DOORS OR SLIDING DOORS), OR BY CLASS 10 (FOR RESIDENTIAL SLIDING DOORS) "

Stainless steel fixed pocket available in three heights (400, 600 and 800mm). This fixed ballad serves as an obstacle between two or more electric ballads. With this solution, you can make an installation, for the management of passages, more economical. With a simple and pleasant design, it is easily inserted in any environment due to its construction in brushed stainless steel.

Compatible switchgear Motorline BRAVE 500

Table of manoeuvres V2 EASY-TOP digital 230 V for rolling shutters.

Table of manoeuvres V2 EASY-LUX for rolling shutters with courtesy led light and buttons.

Table of manoeuvres Forsa "FOR M-22' for one- or two-bladed reciprocating engines residential or community use. Includes built-in 500-code receiver.

Hydraulic motor Forsa FULL TANK for community or industrial use sliding doors for sheet metal maximum length of 7 metres the weight of the product.

Non-reversible electromechanical motor Nice TUB 400Vac for sliding doors industrial use up to 4000 kg.

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 3.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

Programming console Erreka IRTAGPROG for TAG and RollerCode management.

PC terminal with management software in the case of installations with TAG and ROLLERCODE systems.

I command Motorline 15 channel MX97N with an innovative and functional design, with support included.

Electromechanical barrier 230 Vac Motorline Semi-intensive use KBA5 with an articulated aluminium mast composed of two profiles of 2,5 m (total 5 m).

Central Motorline MC65 for motor blinds and awnings up to 500W with the possibility of working with BEWEATHER sensor, effort stop for canopy fabric adjustment and independent output for courtesy light.

Engine V2 Irreversible electromechanical jedi 24V For sectional and tilting doors up to 15 m² with 1,000 N starter force (100 kg).

" The Jedi model has stopped manufacturing and replaces the model Atris "