Erreka EPEB Control Panel with Encoder Input for 230 V Up-and-Over Doors

Erreka EPEB control panel with encoder input for up-and-over doors

The Erreka EPEB, referred to as EPE-B in the manufacturer's documentation, is a control panel for one 230 V single-phase up-and-over door motor with encoder.

It allows the door travel to be learned and the operating settings to be configured using DIP switches and a waiting-time potentiometer. On-board control buttons and LED indicators help check the status of various inputs and power supplies.

Main functions

• Travel learning: opening and closing learning procedure using DIP3 and the ST1 button.
• Automatic operation: the door closes once the configured waiting time has elapsed.
• Semi-automatic operation: the door remains open until a new operating command is received.
• Adjustable waiting time from 3 to 60 seconds using the T.E. potentiometer.
• Selectable reverse impulse: applies a brief closing impulse before opening to help release the electric lock.
• FT1 safety input: if activated during closing, the door stops, reverses and opens fully.
• Connections for a plug-in radio receiver and a traffic light board.

Technical specifications

Radio receiver and accessories

Remote control operation requires a compatible plug-in receiver with a decoder and memory. Compatibility with trinary fixed-code or rolling-code transmitters depends on the receiver installed. The control panel uses the first channel only; the second channel of a two-channel receiver has no function through this connection.

The panel also provides a connection for an SMF traffic light board and an LG contact designed to trigger an external lighting timer. These connections do not imply that the accessories are included in the supply.

Compatibility and version

Designed for up-and-over door installations with a 230 V single-phase motor and a compatible two-signal encoder. Before replacing an existing control panel, check the motor, encoder and accessory connections.