- New
Hydraulic Motor Medva Aura BAC 230 V for swing doors | 280 and 400 mm
549,34 €
Hydraulic Motor Medva Aura BAC of 230 V For swing doors, available in versions Aura280 BAC-1.3, with 280 mm stroke for leaves up to 4 m, and Aura400 BAC-1.3, with 400 mm stroke for leaves up to 6 m. It incorporates blocking in opening and closing, soft stop at closing and anti-tidal regulation.
A single engine is supplied according to the selected model. Does not include maneuvering, receiver or controls.
We ship your order within 24/72 hours
Secure payment: Card, Bank transfer, Bizum
Fast shipping from Spain Except bulky
Hydraulic Motor Medva Aura BAC for swing doors
The Medva Aura BAC is a hydraulic actuator of 230 V To automate swing doors. It is available with two stem traveles: 280 mm and 400 mm, to select the appropriate version according to the dimensions of the sheet and the installation geometry.
Incorporates Locking in opening and closing, Soft unemployment at closing and anti-tidal regulation. Your hydraulic system uses oil MVD-32 And it has integrated thermal protection.
Sale of the motor separately: This product includes a Medva Aura actuator of the selected model. The maneuver box, the radio receiver and the controls are acquired separately.
Models available
- Aura280 BAC-1.3: 280 mm race for leaves up to 4 m.
- Aura400 BAC-1.3: 400 mm race for leaves up to 6 m.
The maximum length length should be assessed together with its weight, the assembly dimensions and the conditions of use. Check the utilization graph before choosing the version.
Benefits
- Hydraulic drive For swing doors.
- Locking in opening and closing.
- Soft unemployment at closure.
- Anti-mini regulation.
- Degree Ip65.
- Thermal protection of the engine 100 ° C.
Technical characteristics
| Feature | Aura280 BAC-1.3 |
Aura400 BAC-1.3 |
|---|---|---|
| Feed | 230 V CA · 50 Hz | |
| Engine power | 230 W | |
| Maximum length of leaf | 4 m | 6 m |
| Stem | 280 mm | 400 mm |
| Operating temperature | -15 ° C to +80 ° C | |
| Capacitor | 12 μF | |
| Thermal protection | 100 ° C | |
| Degree | Ip65 | |
| Single time of the stem | 24 s | 34 s |
| Entrance time of the stem | 19 s | 27 s |
| Linear output speed | 1,16 cm / s | |
| Linear input speed | 1,47 cm / s | |
| Maximum circuit pressure | 40 bar | |
| Pump flow | 1.3 l / min | |
| Hydraulic oil | MVD-32 | |
| Output force * | 636 kg | |
| Entry force * | 510.4 kg | |
| Diameter of the stem | 20 mm | |
* Strength values expressed in kg on the technical sheet facilitated. Do not correspond to the maximum permissible weight of the door.
Dimensions Medva Aura
The dimensions A, B, C and D correspond to the dimensional scheme located below the table.
| Dimension | Aura280 BAC-1.3 |
Aura400 BAC-1.3 |
|---|---|---|
| To | 940 mm | 1180 mm |
| B | 660 mm | 780 mm |
| C. | 280 mm | 400 mm |
| D | 1002 mm | 1242 mm |

Utilization graph

Supply content
1 hydraulic motor Medva Aura of the selected model:
- Aura280 BAC-1.3, with a race of 280 mm; or
- Aura400 BAC-1.3, with a 400 mm stroke.
It does not include: Full Pro-FC maneuver box, SRT-255 receiver card or Roll A4 PC controls.
For its operation, the engine needs a compatible maneuver box. If it is used as replacing an existing automatism, the mounting dimensions, the supports and the compatibility of the installed table must be checked.