Pair of transmission shafts 20x20 mm, length 200 mm for tilting motor Nice TRY.

Pair of standard telescopic straight arms for tilting motor Nice TRY.

Transmission device for a couple of motor shafts Nice TRY.

External unlock mechanism to be able to discard the BERMA SEB R tilting engine on the outside in case of lack of the electric current.

Saxo electric motor DEA 902 LIGHT.

Nylon/PVP basting doors brushes.

Handles and mechanical locks swing doors with bolts and keys. What. Needle size 70 mm.

External unlocking for tilting engine DEA LIVI 902 for opening in the event of a power failure.

Supported cable Erreka ORION (3 threads of 0,25 mm2 + mesh).

Notes: Sold in 10 metre coils.

Latigill of 1 metre the unit for swinging or tilting hydraulic motors with their respective racors.

Ø6mm tube spike for whips HYDOM.

Saxo or telescopic gearboxes for Medva model HB1 engines

2-metre lathe the unit for Medva swinging or tilting hydraulic motors with their respective racors.

Telescopic harnesses and torsion bars Forsa I MEAN, ERG.

For the purposes of this Regulation, the following definitions shall apply:.

Fixing bench or rack FAAC 550.

Hydom Minimax bearing for Saxo and Pleleva hardware.

Saxo Hydom Minimax wheel drive.

Renolin-2835 (HyDom) oil for vibrating and tilting hydraulic motors. Packed in 2 or 5 litres.

KIT CA HOME kit of two trailing hoods MEDVA HOME to weld on bars.

Striped tractor or broken striped hood for hydraulic rotor-unic swing door motor from HydroDomestics.

External engine unlocking kit Forsa ERG with removable lock.

Hydraulic oil 1 litre DEA reference 600H.

Hydraulic whip MEDVA 6 mm spindle ends and 1400 mm length.

Different types of hardware for the Emfa ROT COMODIN hydraulic motor for doors up to 14m2.

Different types of hardware for the Emfa ROT COMODIN SUPER hydraulic motor for doors up to 20m2.

Hydraulic lock Emfa CD NEWfor direct lock coupling. It is compatible with Emfa ROT COMODIN engines.

Manufacture from materials of any heading DEA model of the vehicle for use with universal torsion bars.

Kit of 2 grooved crankshaft for Medva BASIC H4 engine.

Support or mounting plate Medva CS HB1 C+P with anchor bolts.

Support or mounting plate Medva CS HOME with anchor bolt.

A pair of straight arms with a cylindrical casing Ø 30,5 mm for centre mounting without welds (L=600 mm).

Pair of L. 1500 mm with striated casing Ø 21.2 mm welded and galvanized, with attachment (side mount).

Straight galvanized pair of arms with striated housing Ø 21.2 mm welded with attachment fittings (L=2000 mm).

Pair of galvanized straight arms with striated casing Ø 21.2 mm welded, with attachment fittings (L=600 mm).

Pair of galvanized curved arms with attachment fittings, without hood.

A pair of galvanized straight arms with attachment fittings, without hood (L=600 mm).

Pair of galvanized tubes with striated casing Ø 21.2 mm L. 2000 mm.

Pair of galvanized tubes with striated casing Ø 21.2 mm L. 1500 mm.

For the purposes of this Regulation, the following definitions apply:.

Hydraulic cylinder opening and whip kit for motor MEDVA (engines without lock)

Striped housing Ø 21.2 mm with M6 housing.

KIT B2M BASIC 2 chiselled rods 27 mm x 2000 mm + 2 tractor heads for welding.

Compatible with the Medva BASIC H4 engine.

Saxo or telescopic gearboxes for the HOME model Medva engine.

Replacement motor pinion Nice IT'S ONLY 2000.

External unlocking bulb with Allen key for Medva Basic engine.