Blue RFID proximity key for INTRATONE equipment

The 3PINS-PRO copy controller is a 4-channel remote control where you can record different fixed codes in all 4 channels at the same frequency or at different frequencies.

Coding shall be carried out with pC-COPY or PC-COPY LITE machine using the 3-pin connecting cable.

Other bars and rods of stainless steel M4 30x12x1000 mm for screwing with separators for residential or industrial sliding motors.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

Garage crew TMP Link coded RollingCode, standard code (not personalised) and frequency 433,92 MHz.

Copy order D-555 for duplication of fixed codes by means of a frequency-adjustable RD-1 machine from 200 MHz to 500 MHz.

* Special prices for professionals. Contact us to open your file.

Universal garage command HR MULTI 2 by proximity, which allows you to double your garage control both fixed and rolling code at frequencies 433.92 MHz, 868 MHz.

" THE HR MULTI 2 CONTROLLER HAS BEEN DISCONTINUED AND REPLACED BY THE NEW IMPROVED VERSION HR MULTI 2 NOA , WHICH OFFERS A LARGER DATABASE THANKS TO ITS NEW MICROPROCESSOR "

Mechanical tubular motor for household blinds, blinds and screens of 36 to 92 kg.

The operator is powered at 230Vac and has a a diameter of 45 mm with the possibility of use in both round and octagonal 50 mm and 60 mm tubes.It has a mechanical manual end run with progressive screw adjustment.

Parking issuer PUJOL MUNTALA model BLACK VARIOCODE with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Issuer Clemsa Subject to the following conditions: 2-channel, unmatched 868 MHz Rollingcode system with a sleek and minimalist design.

Mechanical safety belt Erreka for tilting or swinging doors. The connection is made by wiring from the band to the maneuver board.

The safety belts reverses engine manoeuvre in case of contact with the part of the rubber profile preventing the impact between the door and an obstacle (car or person).

Garage crew Clemsa model MUTANcode N2 this is a 2-channel mini format, RollingCode 433.92 MHz.

The PC ROLL SUPER transmitter is a 433.92 MHz multicopy controller for fixed and evolutionary code duplication with the possibility of unifying up to 2 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.

Issuer Motorline falk model with RollingCode coding system at 433,92 MHz for receivers Motorline or RollingCode open source receivers.

Universal garage command TP MULTI BLACK by proximity, which allows you to duplicate your garage control both fixed and rolling code in frequencies 433.92 MHz , 868 MHz and low frequencies since 280 MHz to 350 MHz.

The recording is made quickly and easily by bringing the original control closer to the TP MULTI BLACK control and performing the recording steps according to the instructions provided.

* Special prices for professionals. Contact us to open your file.

Issuer Clemsa NT1 health care two-channel, unmatched Rollingcode 433.92 MHz system with a sleek and minimalist design.

Garage control DEA Gtx2, 2-channel RollingCode often 433.92 MHz. Standard code. The activation must be carried out in the receiver.

For the purposes of this Regulation, the following definitions apply: compatible with all brands on the market ACM & WHISTLE.

The PC Roll A8 emitter It is a control Multicopia at 868 MHz For duplicate of fixed and evolutionary codes with the possibility of unifying up to 2 different issuers.

The programming is done through the PC-Copy duplicator machine.

* Special prices for the professional sector. Ask us to open a file.

Magnetic key Clemsa LK10 of 6 magnets for opening magnetic locks.

125 Khz read/write RFID proximity key for TP-RFID key duplicator.

The issuer PC ROLL A48 is a multi-copy and multi-frequency controller for fixed and evolutionary code duplication with the possibility of unifying up to 4 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.

The PC ROLL V48 transmitter is a multi-copy and multi-frequency controller for fixed and evolutionary code duplication with the possibility of unifying up to 4 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.

The PC Roll Eco emitter is a frequency multicopy remote 433.92 MHz For the duplicate of fixed and evolutionary codes with the possibility of unifying up to 4 different issuers.

The programming is done through the PC-Copy duplicator machine.

* Special prices for the professional sector. Ask us to open a file.

The PC ROLL V48 transmitter is a multi-copy and multi-frequency controller for fixed and evolutionary code duplication with the possibility of unifying up to 2 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.

The issuer PC ROLL A4 is a multicopy controller at 433.92 MHz for fixed and evolutionary code duplication with the possibility of unifying up to 2 different issuers.

Programming is performed by the PC-Copy duplicator.

* Special prices for professionals. Contact us to open your file.