Cardin T600 230V maneuver box for 1 or 2 swing motors

Cardin T600 230V maneuver box for 1 or 2 swing motors

The Cardin T600 it is an electronic control station designed for automations of 1 or 2 Swing Motors of 230 Vac.

Allows you to manage electromechanical and hydraulic motors, incorporating advanced functions of regulation of force, slowdown, progressive start, automatic closure and control by encoder.

It is the recommended center for hydraulic operators Bl Blues 5 and Bl Blues 5R, allowing controlling one or two sheets.

It also has tickets for photocells, safety bands, racetracks and different control devices, as well as outputs for electronement, lighting and other auxiliary accessories.

Central for 1 or 2 swing motors 230V

✓ Control of 1 or 2 Motors of 230 Vac.

✓ 2 × 800 W with two engines.

✓ 1200 W with a single engine.

✓ Compatible with engines electromechanics and hydraulic.

✓ Electronic force regulation.

✓ Progressive start and slowdown.

✓ Possibility of control through encoder.

✓ Network supply 230 VAC / 50 Hz.

✓ Control for 1 or 2 swing motors.

✓ Electronic regulation of the couple and engine force.

✓ Management through encoder or operating times.

✓ step by step / STOP.

✓ Automatic closure configurable.

✓ Function of pedestrian opening.

✓ Double photocell entrance.

✓ fototest.

✓ Tickets for race.

✓ Double entry for 8.2 kΩ resistive safety bands.

✓ Soft unemployment / slowdown.

✓ Specific function for communities.

✓ ariete back in opening.

✓ closing stroke.

✓ Exit for electrocerradura.

✓ Exit for pre-silent lamp / courtesy light.

✓ Connection for garage light.

✓ Auxiliary channel for other applications, such as lighting or irrigation.

✓ Connector for radio receiver OC2 optional.

✓ Compatible with programming interface PREG-LINK OPTIONAL.

The T600 center allows you to select different engine configurations to adapt its operation to the installed type of automation.

It has a specific configuration for oleodynamic / hydraulic motors, optimizing the operating parameters for this type of operator.

For this reason it is especially suitable for controlling hydraulic engines Bl Blues 5 and Bl Blues 5R.

The T600 allows you to make a electronic regulation of the maximum torque of the engines.

It also has soft-start and slow down in the final stages of the route, reducing mechanical efforts and blows against the stops.

The slowdown points can be adjusted during the programming of the race.

The plant has independent entrances for engine encoder M1 and M2.

When the installed engines have Encoder, the T600 can use the position information to improve the accuracy of programming, control of movement and detection of obstacles.

The T600 has different entries for security devices:

■ Fotocell FT1: action during closing.

■ Ft2 photocell: safety control in opening and closing.

■ Band BSC: sensitive band for closing intervention.

■ Banda BSA: sensitive band for opening intervention.

■ Entry of STOP to immediately stop automation.

The Central has independent entries for different commands:

✓ Opening.

✓ Close.

✓ Step by step.

✓ Pedestrian opening, which in two-engine facilities allows you to open only the sheet corresponding to the M1 engine.

The T600 allows us to manage a electrocerradura, especially useful in installations with reversible engines, such as the BL BLUES 5R.

It also has specific functions such as ariete back in opening and closing stroke, facilitating the releasing and correct drive of the electric lock.

These functions must be configured according to the features of the door and the installed system.

The T600 center has a specific connector to install a oC2 radio receiver.

The radio receiver is not included and must be added separately when you want to control the installation by remote controls.

The T600 has connection for optional accessory PRG-Link.

This system allows advanced operations of programming, configuration and diagnosis through a compatible interface.

The T600 has different auxiliary outputs to complete the installation:

✓ Signaling lamp.

✓ Courtesy light.

✓ Garage light.

✓ Electronement.

✓ Configurable auxiliary channel for applications such as lighting, irrigation or other devices.

Important

The oC2 receiver, remote controls, PRG-LINK, photocells, safety bands, Electronement and other external accessories are not included unless expressly indicated.

See the instruction Manual Cardin T600 to review electrical schemes, connections, programming and configuration of the central.