New products

Showing 1-24 of 75 item(s)

Control Panels

Maneuvering V2 ABLE CX EVO2 24V for 2 swing engines

Cx evo2 It is a digital maneuvering box designed for the automation of Swing and sliding doors equipped with one or two 24 V motors. It incorporates an intuitive programming by screen and allows continuously monitoring the status of entries and automation. Its electronics allows you to regulate the power of the motors by means of a power modulation,...

Batteries for Automation

Battery charger ROGER B71 / BC for Brushless Digital Controller

ROGER

B71/BC

€73.00

Roger B71 / BC It is a battery charger designed for brushless digital maneuver boxes Roger Technology B70 / 1DC and B70 / 1T. This module allows you to connect and maintain two 12 V lead batteries connected in series, providing backup power to the automatism in case of failure or interruption of the electric current.

GSM, Bluetooth and WiFi modules

Módulo Wi-Fi Roger B74/BCONNECT para cuadros Brushless

ROGER

B74/BCONNECT

€84.00

Spare parts

Run-up Pujol Winner AC for roller motor

Pujol

2618587

€35.00

Run-up Pujol Winner AC It is a spare part designed to replace the set of race end in roller engines Pujol Winner AC, usually used in roller garage doors, shops and motorized metallic blinds.

Olceptable safety photocells DEA Line-X / Lb with battery...

Olceptable safety photocells DEA Line-X / Lb with battery... 2

Manufacture from materials of any heading

Olceptable safety photocells DEA Line-X / Lb with battery for automatic doors

DEA SYSTEM

662043

Line-x / lbs is a couple of PHOTOCELLES WITH BATTERY EMISER, Designed to offer maximum safety and ease of installation at automatic doors, especially in areas where it is not possible to wire both sides. Thanks to its adjustable system, it allows adjusting the detection angle accurately, facilitating the alignment even in complex installations.

Transformers and power supplies

Transformador toroidal 200VA de CCG

EMFA

800055

€54.00

Rails & accessories for sectional doors

Beninca VN.RV | Conjunto de reenvío para Motores Seccionales de la serie VN

Beninca

9520016

€98.00

Receptors

Clemsa RN 42 LR - Long Range 12 / 24V - 230VAC Outdoor Receiver

Clemsa

120000002913

€118.00

Outdoor receiver 12/24 VDC / AC - 230 VAC with capacity for 400 users with LR (Largo) technology. The receiver has 2 independent channels.

Swing Gate Motors

Automation Kit CAME Ferni 230V for swing doors | Ref. 8K01MB-009

CAME

8K01MB-009

€942.00

The Automation Kit CAME Ferni 230V reference 8k01mb-009 It is designed to automate swingle In residential or community facilities, offering reliable, robust and durable performance. The system Ferni stand out for its mechanical design, especially indicated for doors with big pillars or with a considerable distance between the axis of the hinge and the...

Spare parts

Replacement engine accessories FAAC 413/415

FAAC

63003351

€25.00

Spare parts

Recambio cuerpo Motor FAAC 413/415

FAAC

63000569

€83.00

Tubular transmitters & accessories

Vivaldi Timer TX5 | Control with programmable timer of 5 channels

CAME

001YE0116

€67.00

The Vivaldi Timer TX5 CAME It is a remote control with programmable timer Of 5 channels that serves to automate radio motors according to schedules. This device allows a motor to move without the user press the knob.

Lámpara destellante RGB para múltiples aplicaciones...

Lámpara destellante RGB para múltiples aplicaciones... 2

Flashlights

Lámpara destellante RGB para múltiples aplicaciones compatible con centrales de Motorline

Motorline

MP300

€29.00

Spare parts

Set of career fals Motorline for sliding motors

Motorline

FDCN

€18.00

Set of end-of-the running blades compatible with a wide range of sliding motors Motorline. This replacement allows precise detection of the opening and closing points, ensuring reliable automation operation. Ideal for maintenance or substitution tasks.

Accessories Barriers to pass

304 fixed stainless steel support to support the mast of passage barriers

Motorline

SPAT-F INOX

€123.00

Fixed support in stainless steel 304 to support the mast of passage barriers.

Transformer CAME 119Rir239 for Central ZL38

Spare parts

Transformer CAME 119Rir239 for Central ZL38

CAME

119RIR239

€85.00

The transformer CAME 119rir239 is an original spare part designed for the electronic CAME Zl38, used in automatic automatic brand automatisms and barriers CAME. This component is responsible for properly feeding the electronic board, guaranteeing the stable operation of the control system.

Copy of Luminous crown of red / green LED lights for...

Copy of Luminous crown of red / green LED lights for... 2

Accessories Barriers to pass

Copy of Luminous crown of red / green LED lights for barrier CAME GARD GT4

CAME

803XA-0430

€90.00

Lighting crown of red / green LED lights for barrier CAME Gard GT4.

Accessories Barriers to pass

Group Auxiliary contacts to verify the mast position CAME GT8 GARD

CAME

803XA-0380

€47.00

Group Auxiliary contacts to verify the mast position CAME Gard GT8.

Glass Door Automation

Adaptation kit FAAC RKU 1400 for sliding glass doors

FAAC

105041

€1,112.00

The adaptation kit FAAC RKU 1400 is a system designed to facilitate the replacement of old operators in Automatic sliding glass doors. This kit allows to adapt a new automatism FAAC When an existing engine is replaced, avoiding complex modifications in the door structure. Thanks to its versatile design, the Kit RKU 1400 FAAC It can be used to adapt a...

Replacement plates

Electronic FAAC E2SL A1000 / A1400 | Original control unit

FAAC

440063003484

€518.00

The electronic FAAC E2sl is the control unit designed to manage the operation of Pedestrian automatic doors FAAC of the series A1000 and A1400. This electronic plate allows you to control all the movement, safety and operation of automatism. This Original replacement FAAC It is ideal for replacing a damaged or damaged plant, restoring the correct...

PCB plaque set for engines Sommer S9110 (868 MHz)

Replacement plates

PCB plaque set for engines Sommer S9110 (868 MHz)

Sommer

S11379-00006

€147.00

The printed circuit board set (PCB) for Sommer S9110 868mhz It is an electronic replacement designed to replace the control system of the garage automation Sommer. This kit includes the set of plates necessary for the correct operation of the automation engine and carriage. This Original replacement Sommer It should always be installed together, since...

Receiver cards

Receiver Erreka RSD | Radio Module 433 MHz

Erreka

RSD-433

€26.00

Module only radio without decoder compatible with all ERROKA devices equipped with internal radio coding systems. The RSD receiver is designed to receive the signals of radio emitters used in motorized door installations.

Replacement plates

Maneuvering Erreka Puma (Pus400ec)

Erreka

27B031

€134.00

The maneuvering box Erreka Puma It is an analog control center designed for the management of single-phase sliding motors Erreka Puma Pus400ec of 230V. This electronic picture allows you to control an engine up 600 W and incorporates advanced functions as Obstacle detection by encoder, Soft unemployment in opening and closing to avoid blows and rebounds,...

GSM, Bluetooth and WiFi modules

Spider Wiegand 26 | 4G / Bluetooth controller for access control, controls and RFID system

PALGATE

SPIDER Wiegand 26

€348.00

GSM controller PALGATE Spider Wiegand 26 with a relay for accessed control system, remote control and Wiegand 26 input for RFID reader connection.

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

New products

Maneuvering V2 ABLE CX EVO2 24V for 2 swing engines

Battery charger ROGER B71 / BC for Brushless Digital Controller

Módulo Wi-Fi Roger B74/BCONNECT para cuadros Brushless

Run-up Pujol Winner AC for roller motor

Olceptable safety photocells DEA Line-X / Lb with battery for automatic doors

Transformador toroidal 200VA de CCG

Beninca VN.RV | Conjunto de reenvío para Motores Seccionales de la serie VN

Clemsa RN 42 LR - Long Range 12 / 24V - 230VAC Outdoor Receiver

Automation Kit CAME Ferni 230V for swing doors | Ref. 8K01MB-009

Replacement engine accessories FAAC 413/415

Recambio cuerpo Motor FAAC 413/415

Vivaldi Timer TX5 | Control with programmable timer of 5 channels

Lámpara destellante RGB para múltiples aplicaciones compatible con centrales de Motorline

Set of career fals Motorline for sliding motors

304 fixed stainless steel support to support the mast of passage barriers

Transformer CAME 119Rir239 for Central ZL38

Copy of Luminous crown of red / green LED lights for barrier CAME GARD GT4

Group Auxiliary contacts to verify the mast position CAME GT8 GARD

Adaptation kit FAAC RKU 1400 for sliding glass doors

Electronic FAAC E2SL A1000 / A1400 | Original control unit

PCB plaque set for engines Sommer S9110 (868 MHz)

Receiver Erreka RSD | Radio Module 433 MHz

Maneuvering Erreka Puma (Pus400ec)

Spider Wiegand 26 | 4G / Bluetooth controller for access control, controls and RFID system

Filter by

Categories

Price

Manufacturers

Home