Home

Motion detector FAAC XBFRM1 (single directional microwave radar).

Electrically operated motor Medva MARTE for use in the manufacture of products falling within heading 8528 up to 2000 kg (MARCH 2000 H4) and up to 2500 kg (MARCH 2500).

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

Kit Leds Barrier Aprimatic PATROL PLUS for the oval measuring arm 76x49 mm .

" This product is discontinued by the manufacturer Aprimatic "

Table of manoeuvres DEA In the case of vehicles of categories M1 and N2 for 1 engine with clutch, slide or barrier. Anti-crush safety device, 433 MHz radio receiver, normal speed regulation and deceleration in opening and closing, force regulation with 70 separate opening and closing levels.

PLATE "203RR" HAS BEEN DE-CATALOGED BY THE NEW ELECTRONIC PLATE DEA NET230N FULLY COMPATIBLE

ROX is an electromechanical gearbox motor for the automation of sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED FOR THE BETTER PERFORMANCE ROBO600 MODEL. WE HAVE THE ROBBERY KIT IS 600.

Receiver Motorline model M175 to control your automatic door remotely through your Smartphone gSM via 3G with telephone call, SMS or by Bluetooh technology via the Android or iOS application.

It has two independent outputs for automation control and two outputs for receiving information on the state of the door (open or closed).

It allows the configuration of up to 509 users, with the possibility of importing the excel list through the Android application.

It allows the recording of the history of confirmed and rejected accesses via an external memory card.

" THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE NEW MODEL M200 "

24VDC power plant, for 2 pulsating motors, with box, transformer and built-in receiver with memory for 120 codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC62 "

Electromechanical barrier 230 Vac Motorline Semi-intensive use KBA5 with an articulated aluminium mast composed of two profiles of 2,5 m (total 5 m).

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of 1 sheet), with pre-assembled guide in one piece of 2,850 mm. What. Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Electrically locked vertical EBPE 230V with external unlock.

" THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER, REPLACED BY THE LOCK THE "

24V EBP vertical electric lock with external unlock + 230V transformer.

" THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER, REPLACED BY THE LOCK ELECTRICITY SUPPLY"

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

All barriers powered by 230Vac motor, the possibility of saving in memory 99 RollingCode codes of full opening with deceleration in closing and opening.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

24V DC control panel for Motorline barriers with programming via display, built-in receiver, obstacle detection, limit switches, automatic route programming, soft stop time regulation, maximum consumption for 1A motors, lock management, 23 Rolling code memories 433.92Hz.

" THIS PRODUCT HAS BEEN REPLACED BY THE MC60 PLATE "

Central Motorline MC60SC developed to work with 1 24Vdc motor, with maximum power of 120W each.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC60 "

Motor gearbox V2 alfariss irreversible electromechanical model with 24V for sliding doors up to 300 kg in weight. With obstacle detection, encoder, steel pinion and precise magnetic race ends.

* THIS ENGINE HAS BEEN REPLACED BY THE MODEL TORQ OF 24V UP TO 500 KG *

A width of not more than 30 mm".

Outer receiver CAME model RKLT-50 for powering electromechanical end-of-course blinds, awnings and curtains up to 50 Nw.

" This model has been replaced by the RKLT-120 with higher benefits "

Electromechanical engine V2 AXIL Irreversible in 230V or 24V format for inclined canopies up to 2,8 m per sheet.

" THIS ENGINE HAS BEEN REPLACED BY THE MODEL STARK3 FROM THE SAME MANUFACTURER "

KIT Motor reducer BFT MANUFACTURE FROM MATERIALS OF ANY HEADING

KIT Motor reducer BFT 24V TIR120/EOS120 FROM63

KIT Motor Came BX-78 from 230V for sliding doors of up to 800 kg and of a length not exceeding 14 metres. What. It incorporates electronic card with programming display, built-in radio decoding, motion control device and mechanical race terminals.

" THIS PRODUCT IS DISCONTINUED, REPLACED BY MODEL OTHER OF A THICKNESS OF "

Microwave motion detection radar up to 3000 mm in height.