24V JM Beninca electromechanical motor for sectional doors up to 22m² with chain or belt guide and anti-crush system.

CHARACTERISTICS

• Irreversible 24 Vdc geared motor for intensive use

• Adjustable stroke with mechanical stop even on the belt guides and the two chain guides.

• Anti-crush system with ampere detection.

• Guaranteed operation even without electric power thanks to batteries that can be perfectly integrated into the motor (not included).

• Advanced electronics with low-power display and courtesy light on JM.3/4ESA versions.

• The encoder device ensures maximum safety and precision in the movements of the door.

• Quick coupling system of the skid connection arm to the door.

Completely revamped electronics

The new control unit is characterized by an integrated switching power supply (230 Vac ± 10% 50/60 Hz supply), which supplies a constant voltage to the electric motor, increasing its efficiency and useful life compared to traditional transformers, also allowing a better adjustment of the movement speed. Built-in 433.92 MHz radio receiver that allows the storage of 64 transmitters with ARC-only coding and removable eeprom memory that allows the transmitters to be maintained even in the event of an electronic board failure. Equipped with a service light with 14 integrated LEDs that improve the light output and can also be controlled by transmitter, in a programmed or bistable way, allowing it to be used also as a ceiling lamp. Automatic, semi-automatic and man-present operating logics, slowdowns in opening and closing adjustable separately, partial opening by transmitter and autoset of parameters. Perfect integrability of the new battery charger accessory.

Transmitter programming and KNX home automation

Among the novelties from an electronic point of view, there is the possibility of managing self-programming by transmitter, which can be activated at the first installation. The product is designed for integration into KNX home automation installations with the X.BE. accessory

Safety, speed, low power consumption and maximum performance

Thanks to an advanced system for consumption reduction (ESA+), the new motor guarantees absorption on standby <0.3 W y una velocidad máxima de 12 m/min, ajustable por separado en apertura y cierre, junto con una elevada fluidez de movimiento. El sistema STC permite gestionar el suministro del par en relación a la posición de la puerta garantizando la máxima seguridad.

SPECIFICATIONS

CP CONTROL CENTER. J3-SW

Parameter control and operating logic via trimmers, dip-switches and keys | Built-in radio receiver 433.92 MHz 64 codes and ARC radio coding | Fixed terminal blocks | Automatic, semi-automatic, and man-present operating logic | Step-by-step tickets, stop, photocell | Integrated LED Courtesy Light |Self-adjusting of operating parameters | Electronic torque adjustment with automatic calculation for each stroke point (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crush safety with amperometric detection and encoder management | Electronic regulation of the residual belt tension at the end of the manoeuvre in 4 levels | Adjustable decelerations | Integrated ESA SYSTEM+ for energy savings | Possibility of configuring parameters and managing transmitters with the Advantouch system | Predisposition for connection of the SW battery charger. CB (optional) | Ready for KNX connection via X.BE card (optional) | Ready for management, configuration, diagnostics and firmware updates via the BeUP app, using the PRO accessory. UP

MEASUREMENT

MANUAL

Instruction manual Beninca JM3 / JM4ESA

Instruction manual Beninca JM3 TURBO

CP Beninca instruction manual. J3-SW