The MT-23 is a receiver that is automatically tuned to remote control frequency without the need to select the frequency by dip-switch.

It works with fixed and evolutionary code commands simultaneously.

The receiver is tuned to a single Frequency.

TECHNICAL CHARACTERISTICS

• Food: 12 to 30V AC/DC
• Frequency: 433,92 – 868,35MHz– AM/FM
• Codes: Fijos y Evolutivos
• Capacity: 512
• Channels: 1 - Mono-Stable
• Temperature: -20oC to 60oC
• Contacts Relé: 3A

RELATED

Retail:

1 and 2: Contacts I relay normally open

3 and 4: Power supply from 12 to 30 Vcc/ac

FUNCTIONING

By pressing the S1 button:

• If the LED stays on fixed indicates that the receiver is not tuned to any frequency
• If the led makes slow intermitences indicates that the receiver has already been tuned to a certain frequency
• To tune the receiver to a new frequency, the memory must be deleted first.

Deleted memory:

Keep the S1 pushbutton tight 10 seconds, the led starts to make quick intermitences and shuts off, codes and frequencies deleted.

Sintony:

• Press the S1 button and drop, the led lights up and stays on fixed.
• Press and without dropping the original control button as close as possible to the receiver to avoid environmental interference
• When detecting the frequency the receiver starts to slow intermitences, keep the original command pressed until the led makes 3 quick intermitences and returns to slow intermitences, The receiver is already tuned to the new frequency and the command is discharged.

MANDOS PROGRAMME

Manual:

• Press the S1 button and drop, the led starts to make slow intermitences
• Press the command button you want to release, the led will make 3 quick intermitences and continue with slow intermitences waiting for another button or other new command of the same frequency to be pressed.
• If no other button is pressed, at 5 seconds the LED is turned off and the receiver is ready to function.
• If the led does not make quick intermitences it indicates that the command is not of the same frequency to which the receiver is tuned (to tune the receiver to another frequency see the tuning section) or is a command that the receiver does not detect it

Remote:

The remote high only works with evolutionary code commands by pressing the hidden pushbutton of the original command. from here the process is the same as the manual

Aspect to consider:

• The command must be discharged previously in the receiver
• The occult pulser serial must start with E or F.

COMPATIBLE MANDATE

• AERF: VDA, Hydom, Aerf standard, E. Garcia, TMP Link, TMP Trim, Portamatic, Medva
• APRIMATIC: TR, TM4, TR4, TX2M, TX4M
• Clemsa: Mutancode, Mastercode
• Beninca: TO.GO, T2WV, IO, CUPIDO, LOT2WCV, CUPIDO 4, IO, LOT, ROLLKEY, T2 VW, T4, TO GO2 VW, TO GO4 VW
• BFT: MITTO, KLEIO, TRC2, TRC4, GHIBLI
• DEA: TR MIO, GENIE GREY, MIO TR2, MIO TR4
• ERREKA: SMAT, SOL, ROLLER, IRIS, LUNA, KUMA
• FAAC: XT2 868 SLH, T3 868 SLH
• JCM: NEO, GO
• NICE: SMILO, FLO, FLOR, ONE, INTI
• PUJOL: VARIOUS
• V2: PHOENIX, TCX, TSC, TRC, HANDY