24V SPINBUS Nice motor with magnetic encoder for sectional doors up to 17.5 m² and single-leaf overhead doors up to 14.7 m².

230 Vac irreversible electromechanical geared motor for residential use, 24 Vdc motor with magnetic encoder. Use in conjunction with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Quick installation in all spaces: with the adjustable head, the release with a positionable cable at all points of the garage and without installing controls on the wall.

Savings and respect for the environment: when connected to the grid, in standby mode, the control unit, with the radio connected, consumes only 0.8 W (SN6031) and 1.2 W (SN6041); connected to a battery or the Solemyo kit, the consumption in standby mode is reduced to 0.036 W.

Very easy with the BlueBUS system: which allows two-wire connections only between the control panel and the photocell pairs.

Safe: obstacle detection and automatic programming of working times, monitoring of engine absorption during the race, self-diagnostics using the flashing light and the courtesy light with LED.

Adjustable acceleration and deceleration at the beginning and end of each manoeuvre.

Pre-installation to connect the state-of-the-art 8.2 KOhm sensitive edges.

Bright: Courtesy light with integrated LED, which can replace garage lighting.

AVAILABLE MODELS

■ SN6031: Irreversible, 230 Vac, 24 Vdc motor, integrated control panel, 800 N.

■ SN6041: Irreversible, 230 Vac, 24 Vdc motor, integrated control panel, 1000 N.

AVAILABLE GUIDES

■ SNA30: Pre-assembled 3 m guide with strap

■ SNA30C: Pre-assembled 3 m guide with chain

SPECIFICATIONS

MEASUREMENT

MANUAL

Operating manual NICE SPINBUS