Motor kit CAME BXV10AGS at 24 V for sliding doors up to 1000 kg both residential and communal.

CHARACTERISTICS

• Possibility of emergency operation in case of power failure
• Possibility of installing magnetic running ends and a heater for harsher weather conditions
• Electronic card, with separate terminals and display
• Rolling Code and Key Code (Twin) radio decoding incorporated
• Self-diagnosis of both wireless and wired security devices
• Ability to operate keyboards directly CAME using the R800 accessory or connecting transponder selectors CAME by means of the R700 accessory
• Combined connection by means of the CSR accessory

TECHNICAL CHARACTERISTICS

• FoodFor the purposes of this Regulation:
• Power supply24V
• Consumption in stad-by: 5.5W
• Power: 400W
• Maximum current absorbed16TH
• ColorOTHER:
• Operating temperature: -20 ÷ +55 oC
• Push: 1000N
• Maximum manoeuvring speed11m/min
• Working time180s
• Intermittent / working: intensive
• Degree of protection: IP44

THE KIT CONTAINS:

■ BXV10AGSThe following: 24Vdc motor for doors up to 1,000kg and 20m in length.

■ MANUFACTURE FROM MATERIALS OF ANY HEADING: Two-frequency fixed code TOPD2FKS transmitter (2 units)

■ 001AF43S: Plug-in radio card at 433.92 MHz.

■ 001DIR20: Pair of synchronized 12-24V photocells up to 10 meters.

■ 001TOP-A433N: Antenna tuned to 433.92 MHz.

Incorporates power plant ZN7, capable of connecting any 24 V AC/DC powered safety device, such as photocells, in addition to control, safety and light indication devices.

Built-in receiver capacity for 250 emitters.

Separate terminals and programming by Display to facilitate the start-up and diagnosis phases.

The maneuver board is protected by a plastic housing to protect it from insects.

MEASURES

MANUAL

Instruction manual CAME BXV

PRESENTATION BXV 1000