Automation

Showing 265-288 of 588 item(s)

Swing Gate Motors

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m. It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Sliding Gate Motors

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg

Aprimatic

KT02724

€393.00

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg. What. Ideal for residential doors of intensive use. Operator at 24 Vcc for sliding doors up to 700 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Sliding Gate Motors

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg

Aprimatic

KT021024

€415.00

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg.Ideal for residential doors of intensive use. Operator at 24 Vcc for sliding door up to 1000 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

KIT engines Aprimatic XT2500 electromechanical 230V for...

KIT engines Aprimatic XT2500 electromechanical 230V for... 2

Swing Gate Motors

KIT engines Aprimatic XT2500 electromechanical 230V for sturdy doors up to 3m

Aprimatic

KT02CPRQ

€774.00

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Engine Aprimatic XT2500 & XT2500L 230V for doors up to...

Engine Aprimatic XT2500 & XT2500L 230V for doors up to... 2

Swing Gate Motors

Engine Aprimatic XT2500 & XT2500L 230V for doors up to 3/4 metres by sheet

Aprimatic

XT2500

€305.00

Engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf (XT2500) and up to 4 metres per leaf (XT2500L).

KIT engine Aprimatic XT2500 electromechanical 230V for...

KIT engine Aprimatic XT2500 electromechanical 230V for... 2

Swing Gate Motors

KIT engine Aprimatic XT2500 electromechanical 230V for sturdy doors up to 3m

Aprimatic

KT02CPRP

€474.00

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Electromechanical engine V2 24V NYK for residential...

Electromechanical engine V2 24V NYK for residential... 2

Swing Gate Motors

Electromechanical engine V2 24V NYK for residential terminals up to 2m

NYK-24V

€207.00

Electromechanical engine V2 New Zealand 24V for residential canopies up to 2 m per sheet, equipped with a mechanical opening cap.

Kit Electromechanical engines V2 24V NYK for residential...

Kit Electromechanical engines V2 24V NYK for residential... 2

Swing Gate Motors

Kit Electromechanical engines V2 24V NYK for residential canopies up to 2m per sheet

Kit Light NYK-24V

€547.00

Kit Electromechanical engines V2 24V NYK for residential lights up to 2 m per sheet, equipped with a mechanical opening cap.

Hydraulic motor BFT Berma Intensive use for tilting doors...

Hydraulic motor BFT Berma Intensive use for tilting doors... 2

Overhead Door Motors

Hydraulic motor BFT Berma Intensive use for tilting doors up to 9m²

BFT

BERMA

€479.00

Hydraulic motor BFT Berma Intensive use at 230V indicated for tilting doors up to 9m². Manufactured to withstand the most severe conditions of use, combines the strength and reliability of operators BFT.

Sectional Door Motors

Engine Nice 24V SPINBUS with magnetic encoder 800 / 1.000 N for sectional doors up to...

Nice

SPINBUS

€188.00

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2. Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Electromechanical MAC Motor Version 230V and 24V Snack...

Electromechanical MAC Motor Version 230V and 24V Snack... 2

Swing Gate Motors

Electromechanical MAC Motor Version 230V and 24V Snack doors Residential up to 3m

DEA SYSTEM

MAC

The DEA Mac is an electromechanical engine for the automation of Beating doors for residential use, available in versions of 230V and 24V. The range is formed by three different models, allowing to select engines for up to 3 meters or, in the case of the MAC / 24 / E version, for sheets up to 2 meters. Its monoblock construction and its internal mechanics...

230V and 24V electromechanical Mac motor for swing doors...

230V and 24V electromechanical Mac motor for swing doors... 2

Swing Gate Motors

230V and 24V electromechanical Mac motor for swing doors up to 3 m

DEA SYSTEM

KIT MAC

The Mac They are electromechanical motors for the automation of Beating doors for residential use, available in versions of 230V and 24V. The MAC range stands out for its robust construction, its internal mechanics with steel and bronze gears and by allowing an opening of the door up to 110 °. The current kits incorporate the new generation of Accessories...

Engine DEA STING electromechanical version 230V and 24V...

Engine DEA STING electromechanical version 230V and 24V... 2

Swing Gate Motors

Engine DEA STING electromechanical version 230V and 24V swing doors residential use up...

DEA SYSTEM

STING

Engine DEA Electrical and electronic equipment for use in the manufacture of motor vehicles residential or community use up to 10 feet per leaf. Automation for swing doors STING handles doors for residential or community use, with blades up to 3 metres long and weighing up to 400 kg. Equipped with built-in mechanical stoppers STING does not need stoppers...

Electromechanical Sting Motor Kit Version 230V and 24V... 2

Swing Gate Motors

Electromechanical Sting Motor Kit Version 230V and 24V Snack Doors Residential Use Up...

DEA SYSTEM

KIT STING

Electromechanical Sting Engines In 230V and 24V version for swing doors Residential or Community use up to 3 meters per sheet or 400 kg of weight. Automation for swing doors sting manipula Doors for residential or community use, with leaves up to 3 meters long and with a weight of up to 400 kg. Equipped with built-in mechanical stops Sting does not need...

Engine Nice RUN 1800/2500 kg 230V for sliding doors with...

Engine Nice RUN 1800/2500 kg 230V for sliding doors with... 2

Sliding Gate Motors

Engine Nice RUN 1800/2500 kg 230V for sliding doors with heavy use

Nice

RUN 1800/2500

€624.00

Engine Nice RUN 1800/2500 kg of 230 V Irreversible for sliding doors with built-in control. Self-ventilating motor with in the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg: and with the electromechanical end of run (RUN1800/RUN2500/RUN2500I).

Sliding Gate Motors

Engine Nice ROBUSKIT 400 BD 24V with two-way emitters for residential sliding doors

Nice

RB400BDKCE

€406.00

Engine Nice ROBUSKIT 400 BD 24V with two-way emitters for residential sliding doors up to 400 kg.

Sliding Gate Motors

Engine Nice ROBUSKIT 600 BD 24V with two-way emitters for residential sliding doors

Nice

RB600BDKCE

€450.00

Engine Nice ROBUSKIT 600 BD 24V with two-way emitters for residential sliding doors up to 600 kg.

Automation

High speed motor Nice Spykit 650 HS BD with two-way control for sectional doors up to...

Nice

SPY650HSBDKCE

€204.00

High speed motor Nice Spykit 650 HS BD with two-way control for sectional doors up to 10,5 m2 and for overhead and non-overhead sliding doors up to 11,5 m.

Automation

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 12,5 m2

Nice

Spykit 650/800 BD

€191.00

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 10,5 m2 (SPY650) and 12,5 m2 (SPY800), for tilting, overflowing and non- overflowing doors, up to 11,5 m2 (SPY650) and 14 m2 (SPY800).

Sectional Door Motors

Engine Nice SPINBUSKIT BD 650N with magnetic encoder and two-way emitter, for sectional...

Nice

SPINBUSKIT BD

€227.00

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Sectional Door Motors

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2

Nice

SPIN11KCE

€195.00

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2, and swings up to 9,8 m2. THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

Roller Garage Door Motors

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters

Forsa

SATURNO

€218.00

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters of a diameter and pulleys of 240 mm.

Overhead Door Motors

24V electromechanical motor Medva GEARBOX chain drive for swing doors up to 20m2

MEDVA

TC.GEARBOX SDB

€443.00

24 V electromechanical motor with chain drive for counterweighted tilting doors not exceeding 4 m in height and 20 m2. Ideal for residential, community and industrial use.

Overhead Door Motors

Electromechanical chain drive motor Medva MTC.RUBI for tilting doors of 18, 25, 36 m2

MEDVA

MTC.RUBI

€485.00

Manufacture from materials of any heading, except that of the product for counterweighted tilting doors of 18, 25, 36 m2. Ideal for residential, community and industrial use.

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Automation

Engine buried Nice L-Fab HS for rapid actuation of swing doors up to 4 m

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg

KIT engines Aprimatic XT2500 electromechanical 230V for sturdy doors up to 3m

Engine Aprimatic XT2500 & XT2500L 230V for doors up to 3/4 metres by sheet

KIT engine Aprimatic XT2500 electromechanical 230V for sturdy doors up to 3m

Electromechanical engine V2 24V NYK for residential terminals up to 2m

Kit Electromechanical engines V2 24V NYK for residential canopies up to 2m per sheet

Hydraulic motor BFT Berma Intensive use for tilting doors up to 9m²

Engine Nice 24V SPINBUS with magnetic encoder 800 / 1.000 N for sectional doors up to...

Electromechanical MAC Motor Version 230V and 24V Snack doors Residential up to 3m

230V and 24V electromechanical Mac motor for swing doors up to 3 m

Engine DEA STING electromechanical version 230V and 24V swing doors residential use up...

Electromechanical Sting Motor Kit Version 230V and 24V Snack Doors Residential Use Up...

Engine Nice RUN 1800/2500 kg 230V for sliding doors with heavy use

Engine Nice ROBUSKIT 400 BD 24V with two-way emitters for residential sliding doors

Engine Nice ROBUSKIT 600 BD 24V with two-way emitters for residential sliding doors

High speed motor Nice Spykit 650 HS BD with two-way control for sectional doors up to...

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 12,5 m2

Engine Nice SPINBUSKIT BD 650N with magnetic encoder and two-way emitter, for sectional...

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters

24V electromechanical motor Medva GEARBOX chain drive for swing doors up to 20m2

Electromechanical chain drive motor Medva MTC.RUBI for tilting doors of 18, 25, 36 m2

Filter by

Manufacturers

Price

Type of engine

Full kit

Type of door

Automation