Bionic

Subtotal €0.00

Shipping

VAT €0.00

Total €0.00

View cart Checkout

There are no more items in your cart

0 0

KIT engine EMFA MTCH of 800N and 1000N for residential sectional doors

Referencia: KIT MTCH 800-1000

€183.00

IVA excluido

221,43 €

IVA incluido

KIT engine EMFA MTCH of 800 N and 1000 N for residential-intensive sectional doors.

THE KIT EMFA MTCH

Quantity

Add to Wishlist

We ship your order in 24/7 hours

Payment by credit card, bank transfer, Paypal or Bizum

Free shipping to the peninsula

KIT engine EMFA MTCH of 800 N and 1000 NFor residential heavy-duty sectional doors with for use in the manufacture of motor vehicles [1].

CHARACTERISTICS

MTCH 800 for doors up to 10 m2.
MTCH 1000 for doors up to 15 m2.
Start and stop gently.
Minimizes the engine effort on the door.
Self-learning force control in both opening and closing.
The over-stress in closing causes the automatic reversal of more than 150 mm.
Low voltage protection, the system will not perform any opening or closing action, to protect the control panel.
Transmitter system, to prevent code matching or hacking.
Security lock.
Automatically closed.

	MTCH 800	MTCH 1000
Power supply	In the case of vehicles of categories M1 and N2	In the case of vehicles of categories M1 and N2
Engine voltage	24 VDC	24 VDC
Light bulb	25W / 230V	25W / 230V
Class of protection	IP 20	IP 20
Operating temperature	-30 °C to +60 °C	-30 °C to +60 °C
Velocity ≈	12 cm/s	12 cm/s
Control frequency	433.92 MHz	433.92 MHz
Traction force	800 N	1000 N
No maximum of controls	20	20
Transmission	String	String
Automatic closing time. adjustable	0 ÷ 100 sec	0 ÷ 100 sec
Light time courtesy	Three minutes .	Three minutes .
Maximum lifting height	8 feet .	3.3 meters .
Door width	≈ 4 m.	15 feet .
Max. m2 of door	Ten square feet.	15 square feet.
Guidance	Three and four meters.	Three and four meters.

MODELS AVAILABLE

•IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N2: 800N motor with 3350mm (2x1,675m) belt drive + 2 emitters + wall pusher.

• FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY:: 800N motor with 4350mm belt guide (2x16,75m+1,000m) + 2 emitters + wall pusher.

• THE AMOUNT TO BE RECOVERED SHALL BE CALCULATED AS FOLLOWS:: 1000N motor with 3350mm (2x1,675m) belt drive + 2 emitters + wall pusher.

• IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N2: 1000N motor with 4350mm belt guide (2x16,75m+1,000m) + 2 emitters + wall pusher.

MANUAL

Instruction manual EMFA MTCH

Reference KIT MTCH 800-1000

Data sheet

Maximum door area (m2): from 10m² to 13m²
Maximum door area (m2): from 14m² to 17m²

Specific References

Download

MANUAL MTCH 800 TO 1000

Download (1.79MB)

AERF

Manufacture from materials of any heading

GEBA safety photocell with 12/24V cathode ray mirror.

€39.00

GEBA safety photocell with 12/24V cathode ray mirror.

GEBA TRONIC's photocells are of the highest quality, manufactured in Germany and distributed throughout Europe offering high reliability for use in automatic doors with motorised doors. They have some springs on the inside to adjust vertically or horizontallyand the infrared beam to fine-tune the adjustment to the cathode ray mirror.