Garage emitter BFT, four channel MITTO model, RollingCode at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

Garage emitter BFT Two channels, rolling code at 433.92 MHz. What. Programming by means of a pre-programmed control or manually (depending on the receiver model).

Universal control panel with screen for one or two operatorswith sliding or sliding doors, 230 V/650+650 W or 230 V/750 W power supply.

For use in the manufacture of motor vehicles, designed to offer a high level of flexibility of installation thanks to their compact size, the possibility of adjusting the head 90° horizontally, left and right (180° total), and a wide input range of power supply 12-33 V AC and 15-35 V DC. What. Nominal range of 20 meters.

Flashing light without built-in antenna for motors with 24 V power supply.

The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended. Possibility to install on a surface (such as a pillar or column) or on the wall using the special accessory. Grade of protection IP44.

Control panel BFT "WALENA SW2' with DIP switch and potentiometers for one or two operators of 230V/400+400W used in hinged and folding industrial doors, with management of a sensitive bar and the possibility of checking security entrances.

It can manage the deceleration of the gate in both the opening and closing phases. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology. What. The swing doors are colourful and removable to manage the cables with greater agility.