Español
Français
English GB
Português PT
Shopping Cart
There are no more items in your cart
KIT engine EMFA MTCH of 800N and 1000N for residential sectional doors
KIT MTCH 800-1000
€195.00
VAT excluded
235,95 €
Tax incl.
KIT engine EMFA MTCH of 800 N and 1000 N for residential-intensive sectional doors.
We ship your order within 24/72 hours
Secure payment: Card, Bank transfer, Bizum
Fast shipping from Spain Except bulky
KIT engine EMFA MTCH of 800 N and 1000 NFor residential heavy-duty sectional doors with for use in the manufacture of motor vehicles [1].
CHARACTERISTICS
- MTCH 800 for doors up to 10 m2.
- MTCH 1000 for doors up to 15 m2.
- Start and stop gently.
- Minimizes the engine effort on the door.
- Self-learning force control in both opening and closing.
- The over-stress in closing causes the automatic reversal of more than 150 mm.
- Low voltage protection, the system will not perform any opening or closing action, to protect the control panel.
- Transmitter system, to prevent code matching or hacking.
- Security lock.
- Automatically closed.
| MTCH 800 | MTCH 1000 | |
| Power supply | In the case of vehicles of categories M1 and N2 | In the case of vehicles of categories M1 and N2 |
| Engine voltage | 24 VDC | 24 VDC |
| Light bulb | 25W / 230V | 25W / 230V |
| Class of protection | IP 20 | IP 20 |
| Operating temperature | -30 °C to +60 °C | -30 °C to +60 °C |
| Velocity ≈ | 12 cm/s | 12 cm/s |
| Control frequency | 433.92 MHz | 433.92 MHz |
| Traction force | 800 N | 1000 N |
| No maximum of controls | 20 | 20 |
| Transmission | String | String |
| Automatic closing time. adjustable | 0 ÷ 100 sec | 0 ÷ 100 sec |
| Light time courtesy | Three minutes . | Three minutes . |
| Maximum lifting height | 8 feet . | 3.3 meters . |
| Door width | ≈ 4 m. | 15 feet . |
| Max. m2 of door | Ten square feet. | 15 square feet. |
| Guidance | Three and four meters. | Three and four meters. |
MODELS AVAILABLE
•IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N2: 800N motor with 3350mm (2x1,675m) belt drive + 2 emitters + wall pusher.
• FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY:: 800N motor with 4350mm belt guide (2x16,75m+1,000m) + 2 emitters + wall pusher.
• THE AMOUNT TO BE RECOVERED SHALL BE CALCULATED AS FOLLOWS:: 1000N motor with 3350mm (2x1,675m) belt drive + 2 emitters + wall pusher.
• IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N2: 1000N motor with 4350mm belt guide (2x16,75m+1,000m) + 2 emitters + wall pusher.
MANUAL
- Maximum door area (m2)
- from 10m² to 13m²
from 14m² to 17m²
Product accessories
Tap to zoom
