Beninca "YAK25 OTI" 230V motor for heavy industrial doors up to 2500 KG, with oil bath reducer. Control unit with virtual encoder and inverter technology.

CHARACTERISTICS

• Three-phase 230 Vac geared motor for intensive use equipped with a built-in control unit, self-ventilation system and metal reduction in oil bath to guarantee maximum performance even at low temperatures.
• The control panel, which is located at the top of the motor, has an integrated inverter and allows the position of the motor to be calculated by calculating the current intensity in the electric motor (virtual encoder)
• The presence of the virtual encoder makes it possible to optimally manage slowdowns, trace the route (STC System) and control the distribution of motor torque according to the position of the door, ensuring maximum safety.
• Speed can be adjusted from 10 to 24 m/min. depending on the weight of the door
• Safety sensor that interrupts the motor power supply during unlocking operations
• Metal outer crankcase with the possibility of installing photocells from the PUPILLA/PUPILLA series. R (as an accessory)
• ONE2 receiver. WB Included
• Metal release lever

Foundation plate with flange included. Height 32 mm. Ground mounting, wheelbase 280x170 mm, No. 4 Ø 11 mm, wheelbase engine mounting 269x106 mm No. 4 M10

SPECIFICATIONS

• Power supply: 230 Vac (50-60Hz)
• Motor power: 230 Vac
• Maximum current consumption: 4.0 A
• Maximum thrust 2500 N
• Opening speed 24 m/min
• Duty cycle heavy use
• IP44 degree of protection
• Built-in central
• Built-in receiver
• Encoder: NO
• Virtual Encoder
• Magnetic limit switches: NO
• Rack sprocket M4 Z18
• Operating temperature: -20°C /+50°C
• Lubrication: OIL
• Maximum door weight 2500 kg
• Weight 36.3 kg

CP CONTROL CENTER. YAK OTI

• Built-in LCD display
• 433.92 MHz radio receiver model ONE2. WB Included
• Removable power strips
• Automatic, semi-automatic and man-present operating logic
• Engine End-of-Stroke Tickets
• Step-by-step entrances, opening, closing, pedestrian and stop
• Two configurable inputs for photocell active in both opening and closing or active only in closing
• Safety Sensitive Edge Input N.C. or 8K2
• Safety Sensor Input
• Configurable output as door open indicator pilot light, service light and zone light
• Output for Photocell Testing
• Second Radio Channel Output
• Self-adjusting of operating parameters
• Electronic torque adjustment with automatic calculation for each travel point (STC SYSTEM)
• Anti-crush safety with ampere detection
• Adjustable decelerations
• Possibility to configure parameters and management of remote controls with Advantouch system
• Integrated inverter
• Virtual Encoder
• Number of manoeuvres
• Programming Access Password
• Maintenance Notice

MEASUREMENT

MANUAL

Instruction manual Beninca YAK25 OTI