Motor articulated arm Erreka CICLON 230V for swing doors up to 3,5 m or 250 kg
Referencia: CICLON
€353.00
IVA excluido

427,13 €

IVA incluido

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

CYCLONE
Quantity

 

We ship your order within 24/72 hours

 

Secure payment: Card, Bank transfer, Bizum

  Fast shipping from Spain

Except bulky

Articulated arm motor Erreka 230VAC cyclon for swing doors up to 3.5m and 250 kg per sheet, ideal for motorizing residential doors where we have reduced spaces or wide pillars.

Features

  • Easy self-learning of the door tours, spaces and aminating speeds.
  • I practice engine unlocking system with custom key.
  • Ideal solution for very reduced spaces and doors with wide pillars.
  • Obstacle detection for security.
  • Possibility of anti-entrapment system by encoder.
  • High degree of protection to water and dirt.
  • Very powerful engine.

The articulated arm cyclon engine is designed for residential swing doors of a length of up to 3.5 m per sheet and 250 kg of weight.

It is a 230VAC engine available in models with encoder and without encoder with obstacle detection and electronic soft stop.

Technical characteristics

  • 230VAC feeding.
  • Force 220- 500nm.
  • Versions with blocking and without blocking.
  • Maximum opening 130º.
  • Versions with / without encoder.
  • Degree of protection IP44.
  • Without the end of the race.
  • High use
  • Easy installation with both articulated arm and sliding.
  • Possibility of mounting of stops on the sliding arm.
  • Usable in all types of temperatures between -20 / + 60.

* The use of the electro-liner is mandatory in non-blocked models and on blocked models when the length of the sheets is greater than 1.80m.

* With CL210, CL21OF and CLS210F motors, maximum weight of 400kg for doors up to 1.5m.

* With CL250, CL250F and CLS250F motors, maximum weight of 600kg for doors up to 1.5m.

Models available

  • Cl210: Electromechanical motor engine, 220 nm, reversible.
  • Cl210f: Arm electromechanical motor, 220 nm, blocked.
  • Cls210f: Electromechanical arm motor with encoder, 220 nm, blocked.
  • Cl250: Arm electromechanical motor, 500 nm, reversible.
  • Cl250f: Arm electromechanical motor, 500 nm, blocked.
  • Cls250f: Electromechanical arm motor with encoder, 500 nm, blocked.

Manual

Technical sheet Erreka Cyclone

Installation guide Erreka Cyclone

Manual Erreka Cyclone

Video Installation Erreka Ciclon

CICLON

Data sheet

Type of engine
Electromechanical 230V
Type of door
Residential door

Specific References

You might also like

Erreka
Manufacture from materials of any heading
Safety photocell Erreka FT06 emitting-receiver
€34.00
CISA
Electric locks
CISA electric lock with mechanical button for swing doors
€85.00
CISA
Electric locks
CISA electric lock with 50 to 80 mm bulb for swing doors
€85.00
Erreka
Manufacture from materials of any heading
Safety photocell Erreka FT08 with mirror
€58.00

Shipping 24/72h

Fast shipping

from Spain

Quality at the best price

We have the best brands

in garage automation systems

Secure payment

Bank transfer, credit/debit card, Bizum

Technical support

We advise you before and after

to place your order