KIT engine Motorline BRAVO500 at 230Vac with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

Electromechanical motor kit Motorline JAG In 230VAC or 24VDC format, for double swing door up to 4 meters / leaf (Jag400) and for doors up to 6 meters / leaf (Jag600). Irreversible or reversible motor that incorporates mechanical career endings in opening and closing.

KIT engines Motorline Electromechanical winch at 230Vac or 24Vdc for swing doors of 10 to 20 feet per sheet. It incorporates main, two controls and a security photocell.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CLAS 1 with receiver card RNE248 at 433 MHz.

KIT Roof motor Erreka MAXI 24V Intensive use 1200N for sectional doors up to 18m2. What. It has coding for self-learning of the route, anti-crush system and an independent maneuver board.

Roof motor Erreka MAXI 24V Intensive use 1200N for sectional doors up to 18m2. What. It has coding for self-learning of the route, anti-crush system and an independent maneuver board.

Engine EMFA 24V SKYLINE model, for residential or industrial sliding doors up to 600 kg. This equipment has a system that allows the pinion to oscillate and adapt to the irregularities of the zipper, even at gradients of up to 35 mm.

PUJOL MINI MARATHON engine for residential sliding doors up to 400 kg.

The MINI MARATHON model is a single-phase electromechanical 24V with manoeuvre box and built-in receiver at 433,92 MHz. What. It's a very quiet equipment ideal for semi-intensive use for residential cancellations.

Prepared with module of M4 zipper pin. Unlocking with lever for manual operation. What. Patented tilting restraint system, which absorbs the deformations of the door and makes the assembly easy.

Optional emergency battery kits (not included) allowing a range of 40 manoeuvres without power supply.

Motor kit FAAC C720 (up to 400 kg) or C721 (up to 800 kg) heavy duty 24V for residential and community sliding doors.

The Juguar Low is a 24V electromechanical motor with built-in central for doors from 2.5 to 5 meters. What. It is the most robust and fastest electromechanical motor to place, and has a telescopic arm.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

Electromechanical engine Erreka ORION 230Vac for swing doors two-bladed counterweight up to 20m2, available with encode or end run. What. Can be used with inside opening or outside opening.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

KIT Electromechanical engine Erreka CALYPSO CA53 of 230Vac to automate residential doors of a sheet up to 3m and 300KG.

The Kit features a VIVO-M101 maneuver box for a 230Vac drive, receiver card, KUMA handles and safety photocells.

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

KIT Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

Hydraulic motor for residential use with damping and locking for swing doors up to 2,5 metres. Semi-intensive use ideal for residential garage or for community garage of 4 to 6 owners.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

It shall be capable of operating at a speed exceeding 100 km/h" designed to automate garage and commercial blinds a diameter of not more than 30 mm, and with a for use in the manufacture of motor vehicles.

The Bi-Motor has an electro-brake system to block the blind, and a knob to unplug it so that it can be opened manually in the event of a power cut. Automation is designed to work with with pulleys of 240/280 mm.

PUJOL double coil motor "WINNER PRO 1200/200" designed to automate garage and commercial blinds axle 60mm or 48mm, and with a lifting capacity up to 340 kg.

The Bi-Motor has an electro-brake system to block the blind, and a blanket to unwrap it and thus be able to open manually in case of electric current cut. Also in the box comes a 48mm axle adapter. Automation is designed to work with 200/220mm poles.

Motor of Clemsa model AR 2581 with/without electro-brake for roller shutters up to 170 kg.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CR81 at 433 MHz.

Machinery and apparatus for the manufacture of semiconductor devices Erreka In the case of vehicles of categories M1 and N2 for semi-intensive use in swing doors of up to 2 metres by leaf. Ideal for doors with wide pillars.

Electromechanical actuator kit with 230Vac articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Electromechanical actuator with 230Vac and 24Vdc articulated arm for swinging doors up to 2 meters per blade, ideal for doors with wide pillars.

Guide to Strap for Secondary Motor Clemsa AS60/AS100 and FAAC D600/D1000

Iron Guide with Correa for Secondary motor Clemsa AS60, AS120, and FAAC D600, D1000, which ensure smooth, silent and efficient operation of your garage door. Manufactured with high resistance materials, this guide offers a precise transmission and a long service life, ensuring the optimal performance of automatisms Clemsa and FAAC.

Electromechanical operator Clemsa AS60 (600N) or AS120 (1000N) for sectional doors up to 15m2 with built-in frame. Optimized installation times thanks to its patented three-step assembly. Courtesy light built in.

The KIT consists of a 230Vac electromechanical actuator with built-in box, RNE248U receiver and 2 NT2S emitters at 433 MHz.

The guide can be chosen at the choice of the customer according to their needs in our deployable.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

KIT Electromechanical engine Clemsa "AA 300 B" 230Vac irreversible with lock, for residential sliding doors up to 3 metres in length per sheet.

The actuator has a lock so it does not require the use of electric locks, however, it may be installed as a recommendation. The actuator stroke is 300 mm and the stem output speed is 1,6 cm/sec. Manufacture is made of stainless steel, and the unlock is protected with a lock giving it greater security and reliability.

Motor kit FAAC 740 EZ16 to 230V for residential sliding doors up to 500 kg.

Engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Engine Pujol Marathon PRO Q III three-phase for sliding doors up to 2000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Electromechanical motor NICE model TOONA 4 external mounting for residential swing doors with blades up to 3 metres. Also available in 24Vdc version, with magnetic encoder.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Motor for heavy sliding doors up to 1500 kg, Designed for non-intensive use in large industrial and residential facilities.

The Nice Thor1500 It is a robust automation to 230v Ideal for large metal gates, offering power, reliability and silent operation even under demanding conditions.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

Kit Electromechanical engines Erreka TEMIS 24Vdc is used for residential hinged doors up to 2,2 m per sheet.

Electromechanical engine Erreka TEMIS 24Vdc is used for residential hinged doors up to 2,2 m per sheet.

Electromechanical motor kit DEA Livi 902 SR 230V for residential tilting doors of semi-intensive use up to 9m² with built-in analogue receiver. The kit can be chosen with telescopic fittings + torque bars or with central saxette hardware.

The motor incorporates mechanical opening-closing endings for a more accurate adjustment.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Engine Nice Robus 400/600/1000 kg at 24V For residential sliding doors with versions for electromechanical career purposes (RB6010 and RB1000) and for inductive career purposes (RB600P and RB1000P).

Engine Erreka 24V DINGO designed for light residential sliding doors up to a maximum of 400 kg. Adaptive pinion to fit any type of zipper.

Roof motor Erreka NAOS for sectional garage doors up to 15m2 24Vdc with encoder capable of lifting up to 100 kg. What. Includes receiver for up to 20 codes.