KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

The ADVANCE N automation has been designed for sectional and tilting doors of piers up to 16 m, for residential use. It is a solution that is characterized by fast movement (19cm/s), low noise level and flexibility of use.

Motor chain drive DEA LATO for industrial sectional doors up to 35m2. What. Model in 230V and 400V version with manual or chain unlocking system.

Motor head PUJOL STC for sectional doors up to 10 m2 and 60 kg (STC600), or up to 15 m2 and 100 kg (STC1000) sectional doors. Built-in receiver maneuver board compatible with VARIO emitters.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Engine EMFA EXPY electromechanical 230V for residential sliding doors up to 600/800 kg. It 's incorporated receiver maneuver box 433 MHz, encoder and anti-crush system.

Engine FAAC 844 E R for industrial sliding doors up to 1 800 kg with magnetic running ends and anti-crush system.

Engine FAAC 746 E R for residential sliding doors up to 400/600 kg with magnetic running ends and anti-crush system.

Electromechanical engines DEA LOOK in 230V or 24V format for swing doors of 2 to 3 metres per sheet.

Engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

OXYGEN SARGON 230 V electromechanical motor for residential sliding doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

OXYGEN ILIAD 230V hydraulic motor kit for heavy duty swing doors up to 4 metres per blade or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN PARIS hydraulic motor at 230V irreversible heavy use for swing doors up to 3 meters per blade.

The engines of the PARIS series incorporate double lock but the use of electric lock is recommended, they have a 240 mm stem for residential or community doors up to 350 kg.

Kit Electromechanical motor Medva PW530 24V for swing doors up to 4,5 m or 550 kg weight.

The PW530 engine is ideal for powering semi-intensive residential and community folding doors

Kit Electromechanical articulated motors Medva PA250 24V for swinging doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

Kits OXYGEN ILIAD 230V hydraulic motors for heavy duty swing doors up to 4 metres per sheet or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

Kit's OXYGEN SARGON 230V electromechanical motors for residential swing doors up to 4m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Kit's OXYGEN SARGON 230 V electromechanical motors for residential swing doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

The actuator TRIK 24SILENCE 24 of 24Vdc has been designed to cover the market space of rolling doors made of aluminium or stainless steel slabs these doors require a quality actuator to perform silent and rapid manoeuvres with soft stops at the end of the run to avoid hitting the lock.

Motor kit CAME BKV15AGS at 36 V for sliding doors up to 1500 kg both residential and communal. Includes graphics card, Adaptive Speed & Torque Technology, 4 safety inputs, movement management and obstacle detection.

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 3.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

Other vehicles Beninca BOB21M (230Vdc) and BOB2124E (24Vdc) for residential doors up to 2.1 metres in length per leaf.

Electromechanical engine Beninca 24V JM for sectional doors up to 22m2 with chain or belt guide and anti-crush system.

Engine Beninca Electromechanical ZED version 230V or 24V for counterweighted residential swing doors up to 12,5m2 with built-in central and encoder.

Irreversible electromechanical gear motor for residential counterbalance swing doors. Available in 230Vac and 24Vdc versions with or without mains. Courtesy light, race finishes and built-in control buttons.

KIT Sliding engine Beninca BULL424ESA heavy duty 24Vdc for residential doors up to 450 kg. What. Incorporates receiver and encoder maneuver board.

Engine Beninca 24V heavy duty KPONY for residential doors up to 400 kg with built-in box receiver and anti-crush system.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

The SPACE N automation has been designed for sectional and swing doors of piers up to 16 m2, for residential use and medium to high intensity. A motor that is characterized by having a fast movement (24cm/s), silent and powerful.

Motor centre axle ACM K535 EF, with 1 coil electrophrene removed for 60 axle and 200mm pulley, for roller shutters up to 260 kg.

Motor centre axle ACM K545 EF, with 1-coil electrobrake resized for 76 axle and pulley 240mm, for roller shutters up to 250 kg.

Electromechanical engine Clemsa AC14C (up to 1400 kg) and AC20C (up to 2000 kg) for industrial doors with built-in magnetic track terminals and centre.

Electromechanical engine DEA LOOK in 230V or 24V format for swing doors of 2, 3 or 5 metres in length.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Hydraulic motor FAAC 400 to 230 V for swing doors of 2,2 m to 7 m per sheet. What. Ideal for powering residential or community doors.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

Hydraulic motor EMFA TOR 4A & TOR 5A for heavy use swing doors for residential, community or industrial canopies for leaves from 4 metres to 7 metres in length.

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.