High speed motor Aprimatic "FAST WAVE 424" 24V for sliding doors up to 400 kg and 320 mm/s for residential use.

Incorporates the manoeuvre chart, with anti-crushing system to reverse the manoeuvre in case of detection of obstacles. What. Custom key unlock in case of power failure.

KITs Electromechanical engines DITEC PWR50 24V for heavy duty double swing doors with a leaf length of up to 5 metres.

Reversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Jag engine Motorline electromechanical In 230VAC or 24VDC format, for swing door up to 4 meters / leaf (Jag400) and for doors up to 6 meters / leaf (Jag600). Irreversible motor that incorporates electrical career endings in opening and closing.

Engine axle traction EMFA VNS for industrial type sectional doors with heavy use.

KIT engine Forsa VENUS single phase 230V chain drive for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Electromechanical motor Beninca AU96 for residential-use tilting doors, designed to automate sheets up to 12 m² in new facilities or as replacing existing operators.

The Beninca Au96 It is an irreversible operator of 230 Vac equipped with career finisms and a high strength metal transmission, ideal for private garages and communities with moderate traffic that require a reliable, silent and durable system. This version is supplied without maneuvering box, without hardware and no control, designed for installations where these elements are already available.

BENINCA motor gearbox "BOB30" for residential doors up to 3 metres wide, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing.

Electromechanical actuators V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

Kit Electromechanical articulated motor Medva PA250 of 24V for swing doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

KIT Electromechanical engines DITEC PWR50 24V for heavy use swing doors with a leaf length of up to 5 metres.

The irreversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

Electromechanical axle traction operator BFT "PEGASO' for semi-intensive or intensive use to automate industrial sectional doors of 20m2 to 45m2.

Mechanical lock and end of run of absolute encoder with possibility of rapid ground regulation.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

With a thickness of only 13 cm, TIZIANO is one of the most compact operators on the market, so it can be installed in any architectural context.

Thanks to the radio receiver built into the control centre, the TIZIANO can memorize the code of 10 remote controls from the MITTO or KLEIO series and/or wireless control systems such as, for example, MIMEPAD or T-BOX.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Articulated motor BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential electromechanical articulated-arm operator for swinging cantilever blades up to 2 m and up to 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Electromechanical engine BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Engine Forsa ZETA axle traction for sectional doors up to 28m2 with unlock and chain of 6 meters, Receiver and 2 868 MHz transmitters.

KIT Electromechanical engine V2 "ATRIS 700' Irreversible 24 V other, of circular cross-section, of iron or steel, with a starting force of 700 N (70 kg).

Sliding engine EMFA HULK "High Speed" and Brushless technology 48V heavy use, doors up to 1800 KG. It incorporates a manoeuvre display and a 433 MHz receiver.

The SUPER HULK version uses Brushless technology but its speed is standard, in turn allows us to power doors up to 2500 kg.

HULK is the new range of engines developed by EMFA-MAP with a high-performance 48Vdc Brushless technology, for heavy use and heavy doors. What. Under a single aesthetic, the firm has developed two different versions for sliding doors up to 1800 & 2500 kg.

The HULK industrial models have been designed to operate doors of an industrial type and for heavy use. What. They have pinon in M4 steel, although there is an option to apply a larger M6 pinion.

Sliding engine Forsa BETA 230V or 24V format for residential lamps up to 500/800 KG. What. The actuators incorporate a manoeuvring box and a built-in receiver, with magnetic end and anti-lock system.

KIT engine Pujol Marathon DC at 24V with M4 pin for sliding doors up to 700 kg for residential, community or industrial doors.

It contains 5 meters of Nylon zipper with its screw, external receiving antenna and 2 RollingCode Emitters.

KIT Engines buried Motorline "SUBWING' to automate swings up to 2.5 metres.

SUBWING has been developed to automate beating gates with blades up to 2.5m, available in 230Vac, or 24Vdc.

Discreet, it's buried beneath the base of the sheet, making it virtually invisible, without altering the appearance of the gate.

The construction of the outer case in galvanized steel provides great robustness and strength. With the possibility of applying mechanical caps on the automatic to limit opening and closing.

The engines of Motorline KVM205, KVM210 and KVM215 are three-phase three-axle traction motors powered at 230 V. With electronic end, for the automation of industrial sectional doors from 20m2 to 60m2, with possibility of horizontal or vertical application.

With a frequency converter system built into the power station, it enables smoother starts and stops and provides benefits such as: energy savings, process improvement and reduced mechanical maintenance.

Hydraulic motor HYDOM MINIMAX version INTENSIVE for two-bladed swing doors of large dimensions (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor EMFA Global Reversible and Irreversible community sliding doors intensive use with force regulation and smooth stopping.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR35H 24V for heavy use swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for heavy use swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT 1 Electromechanical engine arm V2 CALYPSO irreversible at 230 V for residential sliding doors for sheets up to 2,5 m (CALYPSO400), 3 m (CALYPSO500), and 4 m (CALYPSO600).

The KIT includes:: digital control panel for 1 motor at 230V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Motor gearbox CAME ATS in 230V and 24V irreversible format for swinging canopies with a leaf length of up to 5 metres. ATS actuators are ideal for powering residential (230V) and semi-intensive (24V) community folding doors.

Engine CAME BY-3500T for industrial sliding doors up to 3500 kg and 17m in length. Power supply 230 - 400 Vac three-phase, including electronic card and mechanical end-runners

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

Engine FAAC S418 24V electromechanical for residential or communal high-voltage swing doors.

Roof motor kit MEDVA PG120 of 1200N for sectional doors of a thickness not exceeding 16 m2 with steel split guide with strap. It incorporates a 433 MHz receiver with easy programming via its LED display.

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT engines Aprimatic R223 Irreversible electromechanical of 230 Vac for swing doors up to 2.5 metres per sheet, ideal for residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Engine buried and removable Nice M-Fab HS at 24 V for rapid operation of swing doors up to 3 m.

Buried and removable mounting, ideal for residential applications. Electromechanical motor gearbox 24 Vdc, with magnetic encoder.

Ideal for heavy use and fast manoeuvres: opening to 90° in approximately 8* seconds.

Operator Aprimatic REDMATIC BOX 24V for residential sectional doors of 600/800/1200/1800 N.Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.