Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

Motor for sectional doors Aprimatic 24V Black Box for semi-intensive use.

»Black Box 800 N for sectional doors up to 12m²

»Black Box 1200 N for sectional doors up to 16m²

Range of Other engines CAME AXLE for residential or communal switchgear in 230Vac or 24Vdc version with mechanical race finishes integrated and adjustable.

Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

KIT articulated engines BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential articulated arm electromechanical operators for swinging cantilever blades up to 2 m and not exceeding 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Sliding engine BFT SP3500 with 400V three-phase power supply for industrial doors up to 3500 kg of large size that require power and endurance.

P-1 III three-phase engine from PUJOL MUNTALA. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Ditec ION electromechanical motor with 24 V virtual encoder for residential sliding doors up to 400 kg (ION4) or 600 kg (ION6), with obstacle detection and force regulation.

KIT Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The BiDi WiFi system allows us to make our MC200 board accessible through the Internet, to be able to open, close or stop the roller shutter via our mobile phone thanks to the My app Nice. What. Completely free, and with a quick and easy setup we can control the blind remotely, as long as we have Internet in the area where we install our automation.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Electromechanical engine CAME ATI A5124 24V for swing doors up to 5 metres per leaf.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

Motorcycles Beninca VN.S/M & VN.ST/MT for industrial sectional doors up to 40m2.

Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

DMIL "TIFON 8 EVO" 230Vac sliding motor for residential canals up to 800 KG.

The operator has mechanical race terminals, optical encoder and obstacle detection.

KIT Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice INTI2.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Range of buried operators BFT Sub for residential and community cancels.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Engine FAAC 415 24V electromechanical for heavy-duty sliding doors designed for residential or community use.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

KIT Electromechanical engines Beninca "BOB30' for residential sliding doors up to 3 m per sheet.

Reliable gearbox, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing. Available in 230 Vc and 24 Vdc versions.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

Engine Beninca "YAK25 OTI' 230V for heavy industrial doors up to 2500 kg, with oil bath gearbox. What. Central with virtual encoder and inverter technology.

Articulated motor CAME "FAST 70' 24V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Motor with articulated arm CAME "FAST 70' 230 V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Machinery for making pulp of fibrous cellulosic material Nice "WALKYKIT 2024' for residential swing doors of small dimensions up to 1,8 m per sheet.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Motor with articulated arm Nice "WALKY 1024' for residential swing doors of small dimensions up to 1,8 m.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Electromechanical 230 V articulated arm motor Clemsa "AA 7002 B' with lock for residential overhangs up to 3 m per sheet.

Engine buried DEA GHOST 200 in 230V & 24V version for residential swing doors.

The buried automation for GHOST swing doors handles sheets up to 4 metres long and weighing up to 400kg. As the name suggests, this engine is invisible, performing its function underground with precision and maximum safety for people and media.

Sliding engine Aprimatic "WAVE 836 BS" Brushless 36V for doors up to 800 KG with continuous use.

ONDA 836 BS is an operator for sliding canopies up to 800 kg in continuous use. It has a 36 Vcc motor and «brushless» technology which, together with an oil-washed reducer, allows continuous use of the door. It incorporates dual adjustable control over engine force by mechanical and electronic clutch. Precise movement under the supervision of a door position and speed recognition encoder.

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

Motor DMIL RAYO 1 electromechanical 230V for residential revolving doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.