Ditec ION electromechanical motor with 24 V virtual encoder for residential sliding doors up to 400 kg (ION4) or 600 kg (ION6), with obstacle detection and force regulation.

KIT Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The BiDi WiFi system allows us to make our MC200 board accessible through the Internet, to be able to open, close or stop the roller shutter via our mobile phone thanks to the My app Nice. What. Completely free, and with a quick and easy setup we can control the blind remotely, as long as we have Internet in the area where we install our automation.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Electromechanical engine CAME ATI A5124 24V for swing doors up to 5 metres per leaf.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

Motorcycles Beninca VN.S/M & VN.ST/MT for industrial sectional doors up to 40m2.

Motor kit Erreka Electromechanical ZEUS with saxophone hardware for tilting doors up to 9m2 residential use with 230-Vac lock and electromechanical end run.

Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

DMIL "TIFON 8 EVO" 230Vac sliding motor for residential canals up to 800 KG.

The operator has mechanical race terminals, optical encoder and obstacle detection.

Engine Nice ROX600 is a 230 V electromechanical gearbox motor designed to automate sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED BY MODEL THEFT600 OF BETTER BENEFITS.

KIT Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Range of buried operators BFT SUB for residential and community cancellations.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Engine FAAC 415 24V electromechanical for heavy-duty sliding doors designed for residential or community use.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

KIT Electromechanical engines Beninca "BOB30' for residential sliding doors up to 3 m per sheet.

Reliable gearbox, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing. Available in 230 Vc and 24 Vdc versions.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

KIT engine Beninca "BULL624ESA' 24V for Community heavy duty sliding doors up to 600 kg. What. It incorporates central with receiver, encoder and custom unlock key.

Engine Beninca "YAK25 OTI' 230V for heavy industrial doors up to 2500 kg, with oil bath gearbox. What. Central with virtual encoder and inverter technology.

KIT Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

Articulated motor CAME "FAST 70' 24V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Motor with articulated arm CAME "FAST 70' 230 V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Machinery for making pulp of fibrous cellulosic material Nice "WALKYKIT 2024' for residential swing doors of small dimensions up to 1,8 m per sheet.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Motor with articulated arm Nice "WALKY 1024' for residential swing doors of small dimensions up to 1,8 m.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Chain drive engine Pujol UPPER 24V for residential sliding doors up to 12 m2.

Take it incorporated a receiver maneuver box incorporated at 433 MHz and a TRV connector for connecting 6-pin receiver cards. Optional additions emergency batteries to be able to operate in the event of a power failure.

The UPPER actuator consists of a dc irreversible gearbox very quiet, a painting and a transformer. The movement transmitted by the gearbox motor to the door is effected by chain shot with bolt and guitar that give a constant speed and in its final stretch it changes speed so as not to cause oscillations. They can be mounted on two types of tilting doors; tilting where the bottom sheet opens outwards and for tilting doors where the bottom sheet opens inwards.

KIT engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Machinery for making pulp of fibrous cellulosic material V2 ZORUS 24V electromechanical for residential switchgear, designed to power canopies with wide pillars.

Two models are available:

• ZORUS2 for leaves up to 2,8 m per leaf.

• ZORUS4 for leaves up to 4.2 m per leaf.

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Electromechanical 230 V articulated arm motor Clemsa "AA 7002 B' with lock for residential overhangs up to 3 m per sheet.

Engine buried DEA GHOST 200 in 230V & 24V version for residential swing doors.

The buried automation for GHOST swing doors handles sheets up to 4 metres long and weighing up to 400kg. As the name suggests, this engine is invisible, performing its function underground with precision and maximum safety for people and media.

Sliding engine Aprimatic "WAVE 836 BS" Brushless 36V for doors up to 800 KG with continuous use.

ONDA 836 BS is an operator for sliding canopies up to 800 kg in continuous use. It has a 36 Vcc motor and «brushless» technology which, together with an oil-washed reducer, allows continuous use of the door. It incorporates dual adjustable control over engine force by mechanical and electronic clutch. Precise movement under the supervision of a door position and speed recognition encoder.

Engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet per blade.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.