DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

P-1 III three-phase engine from PUJOL MUNTALA. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Motor for sectional doors Aprimatic BLACK BOX 24V for semi intensive use.

» BLACK BOX 600 N for sectional doors up to 10m2

» BLACK BOX 800 N for sectional doors up to 12m2

» BLACK BOX 1200 N for sectional doors up to 16m2

Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

Sectional engine Forsa DELTA for residential sliding doors up to 18 m2 with built-in receiver box and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and overhangs In the case of vehicles of categories N1 and N2.

Sectional engine Forsa DELTA 806 for sectional doors up to 10 m2 of 600N with built-in receiver box, 2 RollingCode controls and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and swing doors up to 10 m2.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Motor head Nice SPIN SN6021 650N for sectional doors up to 10,5 m2 con embedded table SNA20.

Important: The Guide is not included.

Other trailers and semi-trailerswith a lifting capacity of 400N (40KG). It incorporates a receiver compatible with VARIO4 transmitters.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Rollable door motor PUJOL Model Winner Pro 600/200 designed to automate roller blinds of garages and commercial premises, with lifting capacity of up to 170 kg.

The Winner Pro engine incorporates electrofrenor and is designed for axes of 48 / 60mm and pulleys of 200 / 220mm.

KIT Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The BiDi WiFi system allows us to make our MC200 board accessible through the Internet, to be able to open, close or stop the roller shutter via our mobile phone thanks to the My app Nice. What. Completely free, and with a quick and easy setup we can control the blind remotely, as long as we have Internet in the area where we install our automation.

Rollable door motor PUJOL Model Winner Pro 600/200 designed to automate roller blinds of garages and commercial premises, with lifting capacity of up to 170 kg.

The Winner Pro engine does not incorporate electrofreno and is designed for 48 / 60mm axles and pulleys of 200 / 220mm.

KIT articulated engines BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential articulated arm electromechanical operators for swinging cantilever blades up to 2 m and not exceeding 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

Motor head CAME VER10PLUS from 1000N to 24V with electronics for sectional doors up to 18m2.

Engine Nice WINGO WG2024 24V electromechanical for swing doors up to 2 meters per leaf.

Range of Other engines CAME AXLE for residential or communal switchgear in 230Vac or 24Vdc version with mechanical race finishes integrated and adjustable.

Motor for sectional axle traction doors of the Medva type INDUS90230V electromechanical with 90Nm and built-in maneuver box.

Engine Nice Too3000 Electromechanical 230V for swing gates up to 3m and 300 kg.

Kit Motor electromecánico OXYGEN SARGON a 230V para puertas batientes de uso residencial de hasta 3m de longitud por hoja.

Los motores de la serie SARGON cuenta con un vástago de 300 mm y están pensados para ser utilizados en puertas ligeras de hasta 250 kg.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

KIT Electromechanical engines Beninca TOM30 for batten doors up to 3 meters per sheet. Available in 230Vac and 24Vdc version.

Motor with articulated arm DEA GEKO electromechanical 24V for smooth doors.

GEKO/X electromechanical automation manipulates the door sheet for long residential use up to 3 meters long and 250 kg weight

Engine buried FAAC 770N for residential doors up to 3.5 meters per leaf. It allows an opening angle of 110° (140° and 180° with optional kit).

Electromechanical operator available in version 230V or 24V.

Kit Joint motors DEA ANGOLO 24V for small sized doors up to 2.3m per sheet or 200 KG, with possibility of choose between articulated arm or arm with slider.

One of the engines has nET24N manoeuvre box 433 MHz receiver incorporated.

KIT articulated arm engines Beninca KMB24 for gates residential battens of up to 2.5m per sheet, ideal for motorizing doors with wide, built-in central and custom unlock key.

KIT irreversible electromechanical operators of 24V for residential or community cancellations magnetic race finals, slowing and ftraction and impulse force of 2000 N.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

SOMMER APERTO sectional motor "A 550 L" or "A 800 XL" for connectable doors, with separate control unit of the engine, receiver and integrated WiFi module.

Engine Nice SPIDER 1200BL WiFi integrated for sectional doors up to 17m2 or for a sheet of up to 19.5m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi integrated able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

24V electromechanical swing motor BFT Phobos BT B25 for swing doors up to 400kg and 2.5m or phobos BT B40 up to 500kg and 4m.

Full range of electromechanical pistons for residential use, suitable for swing gates up to 4 meters wide and, maximum, 500 kg of weight.

Obstacle recognition: The D-Track Torque Management and Control System guarantees maximum safety for people and material goods and facilitates system certification.

KIT 24 V electromechanical motor Beninca MARK for built-in residential doors up to 8m2.

The operator has built-in central, receiver and encoder.

Engine for roller shutters DEA WILL 140 E, with electrophrase and micrometric finishes.

The automation WILL 140 E is designed for roller shutters, also heavy. Its de facto traction force is up to 1400N. Easy to install, it is an effective and safe solution.

Engine Nice Wingo WG3524 24V electromechanical for swing doors up to 3.5 meters per leaf.

Sectional engine Motorline ROSSO PRO Brushless 24Vdc for sectional gates up to 18m2 with option to integrate motion and humidity sensors. You can also be integrated WiFi thanks to the MCONNECT LINK device.

KIT ROGER BE20/210GO irreversible electromechanical motors low voltage 24V, intensive use, with internal encoder integrated, for batting cancels with maximum blade 2.8 m, with mechanical tope opening and closing.

Swing Motor Kit Roger BE20 / 400 Irreversible Electromechanical of low voltage 24V, intensive use, with internal encoder integrated, for swing gates with Maximum sheet of 4 m, with mechanical opening and closing.

Engine Motorline KVM115 is a tensile automatism to the axis, for automation of Industrial sectional doors up to 60m², with the possibility of horizontal or vertical application. Ease of installation, configuration and maintenance, makes it ideal for all types of sectional doors.

* Does not include MC410KVM center

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Intensive use motors for heavy doors, as well as for light, for accesses of great influx of vehicles where temperatures are extremely low.Stop very cold environments.Up to 700 kg and 6 m long.

Kit Swing Motors Roger Be20 / 400 irreversible electromechanics of low voltage 24V, intensive use, with internal encoder integrated, for double cancels swing with Maximum sheet of 4 m, with mechanical opening and closing.

Engine 24V electromechanical doors for residential or community doors with a force of 2200N, the PUMA guarantees constant performance, even in conditions of intensive use.

The Batient Motor Motorline PUMA was developed to ensure optimized consumption, without compromising performance. With one 50W power, is ideal for gates with leaves up to 1800mm*, maximizing energy consumption for effective operation.

With low consumption, this engine minimizes environmental impact, aligning with the demand for energy-responsive solutions. The combination of durability, efficiency and modern design makes the PUMA engine a choice superior to other market automations.

*For sheets up to 2000mm with electro-closed use.

KIT Motors Aprimatic XT424B electromechanical 24Vdc irreversible for residential folding doors up to 2.5 meters or 250KG.

The unlocking of these engines can be dismantled by Torx key.

KIT Motors Aprimatic XT524B electromechanical 24Vdc irreversible for residential or community doors of semi-intensive use up to 4.5 meters or 450KG.

VDS PM and PM1 electromechanical motors for batten doors residential use up to 3.5 meters long.

Electromechanical operator BFT ARGO 24 V for sectional garage doors attack axis industrial and commercial sphere.

The robust mechanical structure and microprocessor technology of the control center allow for a intensive use of the operator and ensure maximum reliability over time.

The control system of the pair D-Track and the absolute encoder ensures high accuracy in movement control of the leaf and detection of obstacles.