For use in the manufacture of products falling within heading 8528, in metal and lacquered in black to properly protect from shocks, sunlight and rain.

Wall security photocell FAAC XP20 steerable transceiver system with a maximum range of 20 metres and IP protection.

This auxiliary safety device is used for all types of garage doors and locks, reversing the maneuver in case of infrared beam cut.

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.

For the purposes of this Regulation, the following definitions shall apply: Motorline model MF30 with a maximum range of up to 25 metres.

Photocell kit Motorline MFE model, external modulated reflector with mirror, with Nominal scope of 12m.

Because it is a mirror photocell, it does not need a cable passage for the other side as it emits an infrared signal that reflects in the mirror on the opposite side and receives it again.

Circular reflective cathode-ray mirror for safety photocells, standard for any type of brand. The diameter is 85mm.

Security photocell with mirror model Era Photocell M 12/24v for distances up to 15 metres.

Emitter with mirror. Orientation and sensitivity regulator. The output of the relay shall be 500 mA / 48 V

Carlo Gavazzi security camera with cathode ray mirror, multi voltage (12/24V or 220V) with a maximum range of 12m.

This photocell is designed to withstand adverse industrial environments. What. The distance of detection of 12 m this makes it very useful in applications where dust and weather conditions affect the detection capacity. Housed in a other, not further worked than hot-rolled with two stop presses for easy connection.

Adjustable photocell with battery (from 0 to 210o) 12-24V The FT04 photocell (TX + RX) is specially designed for the industrial and private door market. The sensor complies with the regulations for motor doors in Europe. Its shape makes it easy to mount on the wall.

Safety photocell GEBA with 12 / 24V catadiophust mirror.

The photocells of Geba Tronic are of the highest quality, Manufactured in Germany and distributed by Europe offering great reliability To be installed on automatic doors with motorized doors. They have some Springs on the inside to adjust vertically or horizontalmentE The infrared light beam to refine the adjustment to the catadioptric mirror.

Safety photocell Erreka FT08 with mirror.

FT08 photocells are designed to detect obstacles in automatic door and gate installations, preventing the door from colliding with them.

They consist of a transmitter-receiver module and a mirror. The module emits an infrared beam which is reflected in the mirror and returned to the module.

If the beam does not return to the module, the contacts of terminals 1 and 2 change state.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

The security photocell Erreka Ft06 It is an essential device to guarantee security in door automation systems and access. Designed to Detect obstacles in the passage area, prevent accidents by stopping the closing of doors automatically if it detects the presence of People, Vehicles or Objects.