Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Electronic plate CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Base assembly sliding motor pinion FAAC C720-721 in aluminium.

If only the pinion is needed, the manufacturer cannot supply it. The whole set should be replaced.

Medva ECO waterproofing kit complete with joints, torics and collars.

Replacement output shaft Beninca AU96 AND AU45.

Electronic plate DEA NET324 for sliding engine LIVI 3/24E.

Self-contained license plate reader for outdoor use.

The autonomous license plate recognition system (LPR) is particularly recommended for accesses which do not require a permanent connection to a PC. What. Due to its compact size and easy attachment, it fits perfectly into ramped garage entrances and with little room for passage.

It is a unit of capture composed of IP camera for outdoor use, 2 Megapixels, motorised lens and LED IR focus. What. It includes the character recognition engine (OCR) and a output relay to send an opening order to the door or barrier. What. The capture distance of the licence plate shall be between 2 and 6 m.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Table of manoeuvres Forsa GATE 2 DG to Pylon KAPPA.

Inverter board V2 I'M NOT SURE.

Sectional engine Forsa DELTA 806 for sectional doors up to 10 m2 of 600N with built-in receiver box, 2 RollingCode controls and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and swing doors up to 10 m2.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Cylinder running 20 Hydom.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

Other, of circular cross-section CAME V600.

Locker unlocked Aprimatic Armored outer chrome insertion with button.

• fittings for prestige installations

• interchangeable cylinder manufactured in Italy

• standard electrical connection with three-way buttonhole

• double unlocking of the brake from inside/outside with a single brake cable

Kit Motor electromecánico OXYGEN SARGON a 230V para puertas batientes de uso residencial de hasta 3m de longitud por hoja.

Los motores de la serie SARGON cuenta con un vástago de 300 mm y están pensados para ser utilizados en puertas ligeras de hasta 250 kg.

Articulated motor CAME STYLO 24V for heavy use swinging chandeliers, ideal for the motorization of cantilevers with columns or wide pillars.

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Fast coupling clutch V2 In the case of engines with a rated torque of not more than 20 Nm (for LEX, LEX-RM, LEX-FE, LEX-RFE).

Replacement of sliding motor housing DEA LIVI/N for the 230V and 24V versions.

There are two models to choose from depending on the version with mechanical or magnetic end of race.

Guardaparkig Beninca available in automatic or manual version.

The automatic version has a 24Vdc engine for intensive use, designed to control access to vehicles in a parking area. The motorized automation ensures your parking space offering excellent comfort.

The manual version guarantees the same effectiveness but with the inconvenience that it must be manually operated.

Pineapple Beninca DU45E, AU45/L, and AU96/L.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

Electrical brakes Erreka ERGOS.

Compatible with axle drives 48/60mm, 120/160/200 KG

Photocell of safety ROGER M90/F2ES, radio-receptor of 24Vac.

Set supports and magnets sliding motor V2 YROS.

SUB D40X25 P994.

Trailer and connecting motor chain sectional V2 ATRIS.

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Up to complete in aluminum motor batiente Motorline JAG600.

Pinion or sprocket Sectional engine CAME V600E, V800C and V900E.

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

Other CAME g03750-G0375215

Electronic plate DEA TE700

Central Motorline MC76 for roller blinds with buttons Up, Down, Pair.

The MC76 plant has been designed to be flexible, safe and efficient automation of roller shutters, gates and garage doors.

With 100V-240Vac universal power supply, the MC76 is a versatile solution that adapts to a wide variety of needs, from small businesses to large industrial facilities.

Replacement engine maneuvering spindle LOOK vástago 520mm.

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

Replacement End of career Forsa VENUS left with their microinterruptors and connected.

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Transformative change Nice sPIDO SP600.

Unlock Motorline BRAVO lock bulb with 2 keys.

PUJOL P1 140 XL-100 Motor Strap with a length of 355 mm.

Medva QRF 24V H433 maneuvering table for electromechanical sliding motors 24V with Encoder, Inbuilt Receiver open source 433.92 MHz, with capacity for 255 emitters, force regulation and soft strike.

Unlock with a lever key, which will be used in case of installation on surfaces, such as sand or ground.

Compatible with engines Nice M-Fab, L-Fab and Big-Fab.

Maneuvering DEA Net230N with built-in receiver, universal with digital screen for 1 or 2 motors in 230V, with or without magnetic encoder.

Selection in a single step, of the type of motor used (Sliding, swing, tilting, barrier, sectional door, piluma), with automatic configuration of all inputs / outputs and the parameters of use.

Support nut DEA Mac / sting

Hydom 3LC hydraulic motor joint kit.