Battery kit with integrated charger BFT BAT-associated emission levels for emissions from combustion plants.

The quick and easy-connect battery backup kit allows the operator to work when the electrical current at 230V is lost. The 24V battery backup system can be installed in the motors BFT in the case of products of the series DEIMOS BT A, DEIMOS ULTRA, ARES BT A, ARES ULTRA.

The charger will be responsible for recharging the batteries when they lose their charging capacity.

Replacement electronic plate Clemsa CLAS 305 for the operation of slides with a maximum power of up to 700 W of power. What. It has optional anti-crush system with encoder.

Industrial steerable photocell Erreka KLFRX traceable transmitter-receiver with obstacle detection and wide range.

Mechanical safety belts against crushing for automatic doors or electromechanical barriers.

The LB mechanical belt is a mandatory safety system to comply with the regulations in force which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

7 Ah battery kit for FT210/FT210B transmitters, for intensive use.

Motor electromecánico irreversible CAME E456 con encoder sin cuadro incorporado para puertas basculantes residenciales de hasta 9m².

El actuador electromecánico monofásico a 230V cuenta con bloqueo y control por encoder con una potencia de 200 W y un par de 420 Nm.

Polish 1 channel iron for swing doors.

Barrier rail CAME Aluminium GARD painted in modules of 2 metres in length. Compatible with the automatic GARD barriers.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Hydraulic lock assembly FAAC 580 SB/P with 1-meter whip.

Replacement pinion shaft DEA SPACE 702.

Table of manoeuvres Erreka ERTAIN for automatic glass doors.

The electronic board is ideal for use as a replacement in automatic glass door systems Erreka it's called the Ertain, Global, and Telescopic System models.

Single-phase control panel for retractable doors with built-in Winner motor.

Incorporates the radio part compatible with dynamic code emitters (VARIO).

Manoeuvre entrances protected by zener diodes. .What. Power supply and motor protection by fuse 6A. Led network indicator.

Magnetic sensors CAME SMA for the detection of metal masses.

RFID proximity reader with independent access control, capable of adding up to 10000 users.

Ideal for outdoor use, with anti-passback and anti-vandalism function.

Requirements for the identification of the device Motorline For use with ML4S access control.

It's a four-channel PC

Replacement plastic back cover to cover the PC ROLL V48 control battery housing.

Key unlocking vibrating engine Clemsa AH, THIRTY.

The unlock key will allow us to unlock the engine so we can open it manually in the event of a power failure.

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Table of manoeuvres Aprimatic T240 for 1 motor at 230V, intended for use in ONDA sliding motors.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

Other, of circular cross-section Nice IN ORDER TO ENSURE THE CORRECT APPLICATION OF THIS REGULATION, MEMBER STATES SHALL TAKE INTO ACCOUNT THE FOLLOWING:.

Surface-mounted photocells V2 DFN to embed auto-aligned and synchronized.

Engine corridor Nice ROBUS RBS400 (up to 400KG) and ROBUS RBS600 (up to 600KG) irreversible, 24 Vdc, magnetic race end, control unit with integrated radio receiver, optional backup battery (PS124).

Efficient and safe: functional mechanical design and high performance materials.

Easy-to-play and safe unlock lever; magnetic end, simple installation and which allows to reduce the length of the zipper.

Easy to program,thanks to the MyNice Pro app, connecting to the control unit the Pro-View or the BiDi-WiFi.

Receiver Forsa ST500 wiring with 2 independent channels frequency 868.35 MHz for TP2/TP4 commands.

Key unlock motors sliding Motorline sLIDE and OL series.

Sliding wheel FAAC A100/A1000 SLIDING GEAR ASSEMBLY.

Maneuvering frame Forsa PNG42 for engines tilting or batters from 1 or 2 leaves to 230Vac.

Its housing, elegant and modern, looks corporate colors Forsa (green, black and white), reinforcing our brand identity. With clean lines and a resistant finish, not only is it functional, but adds a professional touch to any installation.

Maneuvering frame Aprimatic T2-E for ONDA sliding engines and swing engines.

Time programming is done by potentiometers and has a connection for the receiver card.

Hydraulic oil for motors battens Forsa.

Racer magnetic race runner Sommer (1 unit).

Barrera de paso Aprimatic VIA 24V Brushless galvanized steel for intensive use with 2.5 to 6 meters mast.

The APRIMATIC VÍA barrier is designed for control of vehicles in restricted accesses with intense traffic and where standard manoeuvre speed is required. Covers up to 6 meters of arm with an opening time from 3 s.

Motor center axle Erreka Emergos for roller shutters up to 160kg Lifting, ideal for motorizing commercial doors or private garages.

The electrofrain slows the shutter once it is closed being blocked and avoiding its opening manually. In the engine, the unlocker of the self-bond (black cable) is included, in order to be able to drive the blind in the case of lack of electric current in the premises or garage.

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

The Juguar Low is a 24V electromechanical motor with built-in central for doors from 2.5 to 5 meters. What. It is the most robust and fastest electromechanical motor to place, and has a telescopic arm.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

KIT engine Motorline SLIDE1024 to 24V with oil and grease lubricated reducer for sliding doors up to 1,000kg heavy duty and IP44 protection.

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

KIT Hydraulic engine EMFA Tor 2000, for heavy use swing doors of a maximum blade length of 4 metres (600 kg) for stem 250, or of a maximum length of 6 metres (800 kg) for stem 400. It offers an elegant design in triangular edition.

Decoder Nice MORX for 1 ETP or up to 4 EDS/EDSI connected in parallel, with 1 BM1000 memory for 255 combinations.

Telescopic bearings for the electro-mechanical motor Dea LIVI 902SR for sliding doors.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Electromechanical motor Forsa Erg 24V for tilting doors of two residential counterweight leaves, designed to automate cancels up to 10 m² with maximum safety and control.

The Forsa Erg 24v It incorporates technology with Encoder and finishing microswitches in opening and closing, offering precise, smooth and reliable operation. It has an anti-explashing system, manual unlocking by cam lever and integrated maneuver box, guaranteeing security and continuity of service even in case of current cut.

Plant developed to work with three-phase motors from 400Vac to 1500W. What. Ideal for use in STARK, KVM115 and KVM2020 engines.

Motor kit CAME Ver10plus of 1000N at 24 V for sectional doors up to 18 m with belt guide and Rollingcode Emitter.