Extension of 0,8 m with mounting fittings for sectional motor guides Nice SPY.

Key selector FAAC T20 E ideal surface for pedestrian and glass sliding doors.

Operator Aprimatic REDMATIC BOX 24V for residential sectional doors of 600/800/1200/1800 N.Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

Industrial radars Clemsa with opening and opening sensors with presence detection.

Control panel Clemsa CLAS 60 V programmable with switch allowing installation of three-phase drives to doors where only 230 V single-phase power supply is available.

Resistive safety belts ERREKA FLPR not crushed for automatic doors or electromechanical barriers.

The resistive band is a mandatory safety system to comply with current regulations which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Transmitter 4 and 8 channels Erreka 433,92 MHz for SENA tubular motor with LED display.

Replacement electronic card for tilting motor FAAC 550.

Pair of transmission pipes FAAC 580, side brackets for single-engine installation.

Support Nice adjustable for masts.

Telescopic masts Motorline Sigma and Zuma with LED lights.

Table of manoeuvres Pujol JUNIOR CLICK with radio brake release for retractable doors. What. Electronic plate with built-in receiver at 433,92 MHz compatible with VARIO transmitters with a capacity of 100 codes.

Table of manoeuvres Motorline MC50KVM single-phase 230V with up/down/stop pusher developed for the automation of sliding, tilting, sectional and passage barriers.

Compact battery of 24 Vdc/1.3 Ah

BENINCA CH aluminium wrench for surface mount with watertight micro-switches.

Requires container KE.

Central command Nice SPYBOXBHS with courtesy LED light for sectional engine SPY650HS and SPY800BDKCE.

Control panel with built-in 433.92MHz receiver for SENA-C and SENA-CM models.

Hydraulic motor HYDOM MINIMAX version INTENSIVE for two-bladed swing doors of large dimensions (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Waterproof box button with OPEN, SHUT, and emergency STOP buttons.

Motor gearbox PUJOL P-LA for chain drive tilting doors. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use. The model P-LA III three-phase, is suitable for doors up to 30m2, for industrial use. Integrated receiver.

Table of manoeuvres Forsa "PNG-20' 230 V for tilting and swinging doors of 1 or 2 sheets.

Box PNG-20 is provided with a socket to insert radio frequency and traffic light receiver cards.

Electromechanical engine BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

Control panel BFT "WALENA SW2' with DIP switch and potentiometers for one or two operators of 230V/400+400W used in hinged and folding industrial doors, with management of a sensitive bar and the possibility of checking security entrances.

It can manage the deceleration of the gate in both the opening and closing phases. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology. What. The swing doors are colourful and removable to manage the cables with greater agility.

Articulated motor BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential electromechanical articulated-arm operator for swinging cantilever blades up to 2 m and up to 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Emergency battery kit BFT "VIRGO THE BAT".

Electromechanical axle traction operator BFT "PEGASO' for semi-intensive or intensive use to automate industrial sectional doors of 20m2 to 45m2.

Mechanical lock and end of run of absolute encoder with possibility of rapid ground regulation.

Table of manoeuvres BFT "LEO B CBB L01' for single phase PEGASO sectional operators.

Replacement axle with pinion or gear reducer for Erreka IZAR, compatible with models IZ4C and IZS4.

Integrated batteries 'BAT 3' for BFT Botticelli BT A for emergency manoeuvres. What. They allow up to two manoeuvres.

Maximum duration of 12 hours in standby mode in case of prolonged outage.

Electronic plate BFT "VENERE M B GDA' ideal for use as a replacement for the operator TIZIANO B GDA IT 'S 24V .

Electronic plate BFT "VENERY BT TO DIS" Operator BOTTICELLI 24V with digital screen.

Red and green multitrassion LED traffic light Celinsa with guide supports

KIT engine Forsa VENUS single phase 230V chain drive for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Aluminium column pair BFT for photocells of the THEA, DESME and COMPACTA series. Height 522 mm

Kit Emergency batteries FAAC E1SL

OBDII cable for IM508

KIT sliding window for 2 sheets up to 2m2 per sheet Motorline KPORTC85. What. It can be applied to the top or bottom of the window.

Developed for your comfort, this automation makes it possible to open sliding shutters in your home with a simple click of the control button, without opening the windows. Available for 1 or 2 sheet shutters up to 2m2 per sheet.

Garage crew FAAC TM1868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Other, of circular cross-section EMFA B45 for electro-mechanical engine ROT MEC.

Outer receiver KINGGATES FRED 2 channels RollingCode is 433 MHz.

" THE FRED MODEL 2 WE'VE GOT HIM OUT. _ FREDDY2 WITH THE CHARACTERISTICS"

High speed motor Aprimatic "FAST WAVE 424" 24V for sliding doors up to 400 kg and 320 mm/s for residential use.

Incorporates the manoeuvre chart, with anti-crushing system to reverse the manoeuvre in case of detection of obstacles. What. Custom key unlock in case of power failure.

Tube motor Motorline 9292mm force 180Nm and 300Nm for roller shutters.

Motors designed to drive blinds and curtains, indoor or outdoor, allows the application of various accessories to work with round tubes.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Accessory replacement CAME AXIS 88001 TO 0156.

Engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet per blade.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Not further worked than hot-rolled, hot-drawn or extruded CAME ATI series 88001-0125

Harness Saxo tilting engine FAAC 580