List of products by brand Tecnoparking

Showing 1-24 of 42 item(s)

Control Panels

KIT Receiving base Tecnoparking for use in the manufacture of motor vehicles

Special 220V receiver base for electric locks or electric locks. What. It has a 12Vac outlet. Ideal for controlled door opening (doors, office, etc.), controlled by remote control.

Multicopy Command "PC Roll Eco" Rollingcode 433,92 MHz

Copying commands

Multicopy Command "PC Roll Eco" Rollingcode 433,92 MHz

Tecnoparking

PC ROLL ECO

€18.00

The PC Roll Eco emitter is a frequency multicopy remote 433.92 MHz For the duplicate of fixed and evolutionary codes with the possibility of unifying up to 4 different issuers. The programming is done through the PC-Copy duplicator machine. * Special prices for the professional sector. Ask us to open a file.

Universal Receivers

Universal receiver wired 433 & 868 MHz 12/24V

Tecnoparking

MT23

€29.00

The MT-23 is a receiver that automatically tunes to the frequency of the remote control without the need to select the frequency by dip-switch. It works with fixed and evolving code controls at the same time. The receiver is tuned to a single frequency.

Receptors

Radio frequency signal repeater 433,92 MHz and 868 MHz

Tecnoparking

MICRO-REP

€48.00

Repeat radio frequency signal at 433.92 MHz and 868 MHz quickly and easily to improve the emission range, only by connecting the repeater to 230 V. The repeater itself will be responsible for receiving the transmission of a control and sending it to the receiver improving emission power to achieve greater range.

This is a multi-frequency autocopy command

Copying commands

This is a multi-frequency autocopy command

Tecnoparking

TP MULTI BLACK

€29.75

Universal garage command TP MULTI BLACK by proximity, which allows you to duplicate your garage control both fixed and rolling code in frequencies 433.92 MHz , 868 MHz and low frequencies since 280 MHz to 350 MHz. The recording is made quickly and easily by bringing the original control closer to the TP MULTI BLACK control and performing the recording...

A garage memory reader (Mutancode, Erreka, JCM, AERF, GO,...

A garage memory reader (Mutancode, Erreka, JCM, AERF, GO,... 2

Repeaters

A garage memory reader (Mutancode, Erreka, JCM, AERF, GO, Nice and Pujol)

Tecnoparking

MEMORY-PC

€18.00

Memory readers allow us to read the memory of a parking lot to view and/or modify it. What. It is mainly used for recording controls where we find an access control (protected controls). Thanks to the PC-Copy software, we can view the code list and save it to our computer.

It shall be capable of operating at frequencies up to 30 kHz

Copying commands

It shall be capable of operating at frequencies up to 30 kHz

Tecnoparking

PC ROLL A4

€18.00

The issuer PC ROLL A4 is a multicopy controller at 433.92 MHz for fixed and evolutionary code duplication with the possibility of unifying up to 2 different issuers. Programming is performed by the PC-Copy duplicator. * Special prices for professionals. Contact us to open your file.

Receiver cards

6 Pins Universal Receiver Card 433 & 868 MHz

Tecnoparking

MT-COMPACT

€29.00

The MT-Compact receiver card is a receiver to connect in 6-pin sockets in maneuver frames, It is automatically tuned to the frequency of the remote control without needing to select the frequency by DIP-SWITCH. It works with Fixed and evolutionary code controls at the same time. The receiver is tuned to a single frequency.

Receiver Access control Micro-mini 12 / 24V 2 channels

Receptors with Access Control

Receiver Access control Micro-mini 12 / 24V 2 channels

Tecnoparking

MICRO-MINI2C

€34.00

12/24 / 24V micro-mini access control receiver 2-channel, with capacity for 400 codes or 1,000 codes. The configuration and management of this receiver is carried out with the PC-Copy or PC-Copy Lite duplicator.

RFID readers and keys

125Khz Read/Write RFID Proximity Key TP-RFID

Tecnoparking

TP-KEY

€3.75

125 Khz read/write RFID proximity key for TP-RFID key duplicator.

This is the first time that the Commission has made a recommendation to this effect

RFID readers and keys

The following information shall be provided by the manufacturer:

Tecnoparking

TP-TAR

€4.00

125 kHz RFID proximity card credit card format for duplicating keys, cards or bracelets with the TP-RFID machine.

Receptors with Access Control

Universal plug-in receiver card for encrypting/protecting controls

Tecnoparking

MICRO-TARJ

€30.00

Plug-in receiver card1 channel, with a capacity of 400 codes or 1,000 codes, to be plugged into manoeuvring frames with standard 6-pin connection. The encoding of the memory card is done with the PC-Copy duplicator.

Receiver card adapter connection 6 pins with output 4 pins

Receiver cards

Receiver card adapter connection 6 pins with output 4 pins

Tecnoparking

ADAPTADOR 6P/4P

€15.00

Other, of circular cross-section for steering wheels with connection 6 pins with output 4 pins other, of circular cross-section Clemsa Mutant code is RNE248.

Multiple connector Clemsa for connecting two plug-in...

Multiple connector Clemsa for connecting two plug-in... 2

Receiver cards

Multiple connector Clemsa for connecting two plug-in receiver cards 4 pins + 6 pins

Tecnoparking

CONRX2EM

€15.00

Multiple card connector Clemsa for use in the manufacture of motor vehicles Clemsa with exits from connection 4 pins + 6 pins.

Card receiver 433.92 MHz RolligCode Keeloq connector 6 pins

Receiver cards

Card receiver 433.92 MHz RolligCode Keeloq connector 6 pins

Tecnoparking

TP-SRT

€20.00

Universal receiver card 433,92 MHz compatible with keeloq type issuers with connector of 6 pins. Compatible with manoeuvring charts: JCM, AERF, EREKA, PLEASE, among others

Receptors with Access Control

4 pins for encrypting/protecting controls

Tecnoparking

MICRO-TARJ/4P

€32.00

Plug-in receiver card1 channel, with a capacity of 400 codes or 1000 codes, for plugging into manoeuvring frames with standard 4-pin connection, specially designed for CLEMSA frames. The encoding of the memory card is done with the PC-Copy duplicator.

Receptors with Access Control

Memory Access Control PC-Copy Receptors

Tecnoparking

MEMORY-PC

€6.00

Memory Control of access accesses PC-Copy.

Receptors with Access Control

MICRO receiver 12/24V Encrypted or Open

Tecnoparking

MICRO

€34.00

A micro receiver of 12/24v of 2 channels, with capacity for 400 codes or 1,000 codes. The configuration and management of this receiver is done with the PC-Copy Duplicator.

Receptors with Access Control

MICRO 220V encrypted or unencrypted

Tecnoparking

MICRO-220

€42.50

A voltage of not more than 300 V2 channel, with a capacity of 400 codes or 1,000 codes, to be configured with the PC-Copy duplicator.

MICRO MINI 12/24V encrypted or unencrypted

Receptors with Access Control

MICRO MINI 12/24V encrypted or unencrypted

Tecnoparking

MICRO MINI

€32.00

This is a 12/24v micro-mini receiver of 1 channel, with capacity for 400 codes or 1,000 codes. The configuration and management of this receiver is done with the PC-Copy Duplicator.

Receptors with Access Control

MICRO 230V external receiver Encrypted or Free

Tecnoparking

MICRO-220V EXT

€46.00

External 230 V MICRO receiver2 channel, with a capacity of 400 codes or 1,000 codes, to be configured with the PC-Copy duplicator.

Universal receiver Multimark and Multifrequency 433/868...

Universal receiver Multimark and Multifrequency 433/868... 2

Universal Receivers

Universal receiver Multimark and Multifrequency 433/868 MHz 12/24V

Tecnoparking

RX2DUAL

€36.00

Universal RX2DUAL universal receiver capable of automatically storing different emitters regardless of code type or frequency being compatible with fixed and evolutionary code commands at 433 or 868 MHz. The RX2DUAL receiver allows us to memorize different marks simultaneously provided it has the frequency 433 MHz or 868 MHz.

Spare parts

ROLL A4 PC housing

Tecnoparking

CARCASA PC ROLL A4

€10.00

ROLL A4 PC housing

Multicopy Command "PC Roll A8" Fixcode & Rollingcode 868 MHz

Copying commands

Multicopy Command "PC Roll A8" Fixcode & Rollingcode 868 MHz

Tecnoparking

PC ROLL A8

€18.00

The PC Roll A8 emitter It is a control Multicopia at 868 MHz For duplicate of fixed and evolutionary codes with the possibility of unifying up to 2 different issuers. The programming is done through the PC-Copy duplicator machine. * Special prices for the professional sector. Ask us to open a file.