• Monday to Thursday 9am to 2pm and 3pm to 7pm • Friday 9am to 2pm
KIT Electromechanical engine 230 V Erreka Orion for tilting doors
Referencia: KIT ORION
€697.00
IVA excluido

843,37 €

IVA incluido

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

OTHER
OPENING
Quantity

 

We ship your order within 24/72 hours

 

Secure payment: Card, Bank transfer, Bizum

  Fast shipping from Spain

Except bulky

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

All the accessories necessary for a new installation are included but the opening of the door must be taken into account, if the lower leaf opens towards the internal or external.

CHARACTERISTICS

  • Safety with obstacle detection/anti-crush system in models with Encoder
  • Electromechanical encoder or end run
  • Sliding sliding doors for two- or four-wheel drive vehicles
  • Locking system
  • Autographed tour

KT2010F IS

  • KT2010F: Electromechanical motor with encoder, 220 Nm, locked
  • EPE-B09: Analogue manoeuvre chart for one 230Vac engine
  • N1100-001 OTHERThe guide
  • N1100: Arm opening inside or outside
  • IRE2Receiver card 433.92 MHz
  • OF WHICH:: fixed code command 433.92 MHz (2 units)
  • FT06For the purposes of this Regulation:

KT2000CF EQUIPMENT

  • KT2000CF: Electromechanical motor with running end, 220 Nm, locked
  • LIVE-M101: Analogue manoeuvre chart for one 230Vac engine
  • N1100-001 OTHERThe guide
  • N1100: Arm opening inside or outside
  • IRE2Receiver card 433.92 MHz
  • OF WHICH:: fixed code command 433.92 MHz (2 units)
  • FT06For the purposes of this Regulation:

THE FOLLOWING PARAGRAPH IS ADDED:

  • KT2050F: Electromechanical motor with encoder, 500 Nm, locked
  • EPE-B09: Analogue manoeuvre chart for one 230Vac engine
  • N1500-001 ANDThe guide
  • N1500: Arm opening inside or outside
  • IRE2Receiver card 433.92 MHz
  • OF WHICH:: fixed code command 433.92 MHz (2 units)
  • FT06For the purposes of this Regulation:

THE FOLLOWING PARAGRAPH IS ADDED:

  • OTHER VEHICLES: Electromechanical motor with end of stroke, 500 Nm, locked
  • LIVE-M101: Analogue manoeuvre chart for one 230Vac engine
  • N1500-001 ANDThe guide
  • N1500: Arm opening inside or outside
  • IRE2Receiver card 433.92 MHz
  • OF WHICH:: fixed code command 433.92 MHz (2 units)
  • FT06For the purposes of this Regulation:

MANUALS

KIT ORION

Data sheet

Type of engine
Electromechanical 230V
Type of door
Residential door
Type of door
Industrial gate

Specific References

You might also like

Erreka
Manufacture from materials of any heading
Safety photocell Erreka FT06 emitting-receiver
€34.00

Shipping 24/72h

Fast shipping

from Spain

Quality at the best price

We have the best brands

in garage automation systems

Secure payment

Bank transfer, credit/debit card, Bizum

Technical support

We advise you before and after

to place your order