Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

KIT articulated engines BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential articulated arm electromechanical operators for swinging cantilever blades up to 2 m and not exceeding 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Electromechanical engine CAME ATI A5124 24V for swing doors up to 5 metres per leaf.

Range of buried operators BFT SUB for residential and community cancellations.

Engine FAAC 415 24V electromechanical for heavy-duty sliding doors designed for residential or community use.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

KIT Electromechanical engines Beninca "BOB30' for residential sliding doors up to 3 m per sheet.

Reliable gearbox, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing. Available in 230 Vc and 24 Vdc versions.

Articulated motor CAME "FAST 70' 24V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Motor with articulated arm CAME "FAST 70' 230 V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Machinery for making pulp of fibrous cellulosic material Nice "WALKYKIT 2024' for residential swing doors of small dimensions up to 1,8 m per sheet.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Motor with articulated arm Nice "WALKY 1024' for residential swing doors of small dimensions up to 1,8 m.

It is particularly suitable for small wooden or PVC doors.

Irreversible electromechanical gearbox motor of 24 Vdc, with articulated arm.

Machinery for making pulp of fibrous cellulosic material V2 ZORUS 24V electromechanical for residential switchgear, designed to power canopies with wide pillars.

Two models are available:

• ZORUS2 for leaves up to 2,8 m per leaf.

• ZORUS4 for leaves up to 4.2 m per leaf.

Electromechanical 230 V articulated arm motor Clemsa "AA 7002 B' with lock for residential overhangs up to 3 m per sheet.

Engine buried DEA GHOST 200 in 230V & 24V version for residential swing doors.

The buried automation for GHOST swing doors handles sheets up to 4 metres long and weighing up to 400kg. As the name suggests, this engine is invisible, performing its function underground with precision and maximum safety for people and media.

Engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet per blade.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.

KITs Electromechanical engines DITEC PWR50 24V for heavy duty double swing doors with a leaf length of up to 5 metres.

Reversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Jag engine Motorline electromechanical In 230VAC or 24VDC format, for swing door up to 4 meters / leaf (Jag400) and for doors up to 6 meters / leaf (Jag600). Irreversible motor that incorporates electrical career endings in opening and closing.

BENINCA motor gearbox "BOB30" for residential doors up to 3 metres wide, quiet and quick to install, thanks to the 2 mechanical stoppers adjustable in opening and closing.

Electromechanical actuators V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

KIT available in electromechanical 230V with CITY4-EVO and electromechanical 24V with CITY2+.

Kit Electromechanical articulated motor Medva PA250 of 24V for swing doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

KIT Electromechanical engines DITEC PWR50 24V for heavy use swing doors with a leaf length of up to 5 metres.

The irreversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Articulated motor BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential electromechanical articulated-arm operator for swinging cantilever blades up to 2 m and up to 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Electromechanical engine BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

KIT Engines buried Motorline "SUBWING' to automate swings up to 2.5 metres.

SUBWING has been developed to automate beating gates with blades up to 2.5m, available in 230Vac, or 24Vdc.

Discreet, it's buried beneath the base of the sheet, making it virtually invisible, without altering the appearance of the gate.

The construction of the outer case in galvanized steel provides great robustness and strength. With the possibility of applying mechanical caps on the automatic to limit opening and closing.

Hydraulic motor EMFA Global Reversible and Irreversible community sliding doors intensive use with force regulation and smooth stopping.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR35H 24V for heavy use swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for heavy use swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT 1 Electromechanical engine arm V2 CALYPSO irreversible at 230 V for residential sliding doors for sheets up to 2,5 m (CALYPSO400), 3 m (CALYPSO500), and 4 m (CALYPSO600).

The KIT includes:: digital control panel for 1 motor at 230V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Motor gearbox CAME ATS in 230V and 24V irreversible format for swinging canopies with a leaf length of up to 5 metres. ATS actuators are ideal for powering residential (230V) and semi-intensive (24V) community folding doors.

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

Engine FAAC S418 24V electromechanical for residential or communal high-voltage swing doors.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT engines Aprimatic R223 Irreversible electromechanical of 230 Vac for swing doors up to 2.5 metres per sheet, ideal for residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Engine buried and removable Nice M-Fab HS at 24 V for rapid operation of swing doors up to 3 m.

Buried and removable mounting, ideal for residential applications. Electromechanical motor gearbox 24 Vdc, with magnetic encoder.

Ideal for heavy use and fast manoeuvres: opening to 90° in approximately 8* seconds.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.