Motor gearbox CAME ATS in 230V and 24V irreversible format for swinging canopies with a leaf length of up to 5 metres. ATS actuators are ideal for powering residential (230V) and semi-intensive (24V) community folding doors.

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

Engine FAAC S418 24V electromechanical for residential or communal high-voltage swing doors.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT engines Aprimatic R223 Irreversible electromechanical of 230 Vac for swing doors up to 2.5 metres per sheet, ideal for residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Engine buried and removable Nice M-Fab HS at 24 V for rapid operation of swing doors up to 3 m.

Buried and removable mounting, ideal for residential applications. Electromechanical motor gearbox 24 Vdc, with magnetic encoder.

Ideal for heavy use and fast manoeuvres: opening to 90° in approximately 8* seconds.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Electromechanical engines DEA LOOK in 230V or 24V format for swing doors of 2 to 3 metres per sheet.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

OXYGEN SARGON 230 V electromechanical motor for residential sliding doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

OXYGEN ILIAD 230V hydraulic motor kit for heavy duty swing doors up to 4 metres per blade or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN PARIS hydraulic motor at 230V irreversible heavy use for swing doors up to 3 meters per blade.

The engines of the PARIS series incorporate double lock but the use of electric lock is recommended, they have a 240 mm stem for residential or community doors up to 350 kg.

Kit Electromechanical motor Medva PW530 24V for swing doors up to 4,5 m or 550 kg weight.

The PW530 engine is ideal for powering semi-intensive residential and community folding doors

Kit Electromechanical articulated motors Medva PA250 24V for swinging doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

Kits OXYGEN ILIAD 230V hydraulic motors for heavy duty swing doors up to 4 metres per sheet or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

Kit's OXYGEN SARGON 230V electromechanical motors for residential swing doors up to 4m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Kit's OXYGEN SARGON 230 V electromechanical motors for residential swing doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 3.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

Other vehicles Beninca BOB21M (230Vdc) and BOB2124E (24Vdc) for residential doors up to 2.1 metres in length per leaf.

Electromechanical engine DEA LOOK in 230V or 24V format for swing doors of 2, 3 or 5 metres in length.

Hydraulic motor FAAC 400 to 230 V for swing doors of 2,2 m to 7 m per sheet. What. Ideal for powering residential or community doors.

Electromechanical actuator V2 STARK3 irreversible 230V or 24V format for sliding doors with blades up to 3 m ideal length for powering residential doors. Equipped with mechanical opening cap.

Hydraulic motor EMFA TOR 4A & TOR 5A for heavy use swing doors for residential, community or industrial canopies for leaves from 4 metres to 7 metres in length.

Manufacture from materials of any heading Erreka ARC 230V for articulated arms for swing doors up to 2,5 m with wide pillars. What. The arms are available in 450mm or 650mm.

230 V Medva HLR hydraulic motor for residential and community swing doors a maximum length of 3 and 6 metres.

Improvements to the actuator have been applied that make it quieter and faster, offering a higher opening and closing speed.

Engine with a new pump, makes it faster and quieter.

Patented adjustable ring system on the stem to adjust the degrees of aperture, smooth stop adjustable at opening and closing.

Connection to hydraulic lock.

230V Medva ECO hydraulic motor for residential and community swing doors with a maximum length of 4, 6 and 7 metres depending on the model.

Improvements have been made to the actuator to make it quieter and faster, offering higher opening and closing speeds

Patented adjustable ring system on the stem to adjust opening degrees, adjustable soft stop at closing.

Machinery for making pulp of fibrous cellulosic material, except in the BACN model.

Motorcycles DEA Electrical and electronic equipment for use in the manufacture of motor vehicles residential or community use up to 10 feet per leaf.

Automation for swing doors STING handles doors for residential or community use, with blades up to 3 metres long and weighing up to 400 kg. Equipped with built-in mechanical stoppers STING does not need stoppers on the ground, elements that could be annoying or unelegant.

Engine DEA Electrical and electronic equipment for use in the manufacture of motor vehicles residential or community use up to 10 feet per leaf.

Automation for swing doors STING handles doors for residential or community use, with blades up to 3 metres long and weighing up to 400 kg. Equipped with built-in mechanical stoppers STING does not need stoppers on the ground, elements that could be annoying or unelegant.

Manufacture from materials of any heading DEA MAC electromechanical version 230V and 24V for residential sliding doors up to 3 m per sheet.

Engine DEA MAC electromechanical version 230V and 24V for residential sliding doors up to 3 m per sheet.

Kit Electromechanical engines V2 24V NYK for residential lights up to 2 m per sheet, equipped with a mechanical opening cap.

Electromechanical engine V2 New Zealand 24V for residential canopies up to 2 m per sheet, equipped with a mechanical opening cap.

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf (XT2500) and up to 4 metres per leaf (XT2500L).

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Engine buried and removable Nice L-Fab HS at 24 V for rapid operation of sliding doors up to 4 m.

It incorporates magnetic encoder and mechanical stoppers. Ideal for intensive use and fast manoeuvres (aperture 90o in approximately 6 sec)

Engine Aprimatic R223 Irreversible electromechanical 230 Vac for swing doors up to 2.5 m and residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Motor reducers DEA OLI/N hydraulic 230V rod 270/400mm for swing doors.

Optimal materials, compact structure and adjustable power allow their use even in continuous working situations. Precision mechanics and the use of hydraulic oil as a motor fluid are the secret to a quiet movement.

Installation is quick and easy and requires no modification of the door structure.

Engine CAME ATS 8K01MP with 24V for use in the manufacture of motor vehicles up to 3 m per daya.

ATS is the universal telescopic engine for swinging canisters.

Engine range BFT LUX hydraulic 230V very intensive use 2 to 5 m long.

Full range of hydraulic operators at 230V for very intensive use, suitable for any installation, suitable for swing doors up to 800kg in weight and 5m in length.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

KIT Electromechanical engines BFT KOSTOS ULTRA BT A" 24V heavy use up to 500 KG and 4 meters.