Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Base assembly sliding motor pinion FAAC C720-721 in aluminium.

If only the pinion is needed, the manufacturer cannot supply it. The whole set should be replaced.

Medva ECO waterproofing kit complete with joints, torics and collars.

Replacement encoder Erreka LYNX AND DINGO.

Replacement output shaft Beninca AU96 AND AU45.

Electronic plate DEA NET324 for sliding engine LIVI 3/24E.

Self-contained license plate reader for outdoor use.

The autonomous license plate recognition system (LPR) is particularly recommended for accesses which do not require a permanent connection to a PC. What. Due to its compact size and easy attachment, it fits perfectly into ramped garage entrances and with little room for passage.

It is a unit of capture composed of IP camera for outdoor use, 2 Megapixels, motorised lens and LED IR focus. What. It includes the character recognition engine (OCR) and a output relay to send an opening order to the door or barrier. What. The capture distance of the licence plate shall be between 2 and 6 m.

Electromechanical engine Motorline PERSIAN, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Table of manoeuvres Forsa GATE 2 DG to Pylon KAPPA.

Inverter board V2 I'M NOT SURE.

Sectional engine Forsa DELTA 806 for sectional doors up to 10 m2 of 600N with built-in receiver box, 2 RollingCode controls and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and swing doors up to 10 m2.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Cylinder running 20 Hydom.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

Electromechanical motor Oxygen Sargon at 230V for residential-use swing doors up to 3m (Sargon S) or up to 4m (Sargon M).

The motors of the Sargon series features a 300 mm (Sargon S) rod 400 mm (Sargon M), and are designed to be used in light doors of up to 250 kg.

Straight drive arm and slide guide CAME STYLO with mechanical end race in opening.

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Anemometer with sun sensor and temperature V2 Hurricane-RS signal via radio, for tubular blinds and awnings.

Fast coupling clutch V2 In the case of engines with a rated torque of not more than 20 Nm (for LEX, LEX-RM, LEX-FE, LEX-RFE).

Replacement of sliding motor housing DEA LIVI/N for the 230V and 24V versions.

There are two models to choose from depending on the version with mechanical or magnetic end of race.

Pineapple Beninca DU45E, AU45/L, and AU96/L.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

Electrical brakes Erreka ERGOS.

Compatible with axle drives 48/60mm, 120/160/200 KG

Unlocking key Erreka Ares & Calypso.

Photocell of safety ROGER M90/F2ES, radio-receptor of 24Vac.

Set supports and magnets sliding motor V2 YROS.

SUB D40X25 P994.

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Up to complete in aluminum motor batiente Motorline JAG600.

Medva ELIOT sliding motor unlocking lever.

Pinion or sprocket Sectional engine CAME V600E, V800C and V900E.

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

Other CAME g03750-G0375215

Replacement engine maneuvering spindle LOOK vástago 520mm.

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

Sliding engine DEA LIVI / X 24V for residential or community doors of 600 or 900 kg semi-intensive use, Maneuvering box with built-in receptor and magnetic career finishes.

Replacement End of career Forsa VENUS left with their microinterruptors and connected.

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Unlock Motorline BRAVO lock bulb with 2 keys.

PUJOL P1 140 XL-100 Motor Strap with a length of 355 mm.

Spare Part Erreka ORION KT2010F and KT2000CF.

Unlock with a lever key, which will be used in case of installation on surfaces, such as sand or ground.

Compatible with engines Nice M-Fab, L-Fab and Big-Fab.

Maneuvering DEA Net230N with built-in receiver, universal with digital screen for 1 or 2 motors in 230V, with or without magnetic encoder.

Selection in a single step, of the type of motor used (Sliding, swing, tilting, barrier, sectional door, piluma), with automatic configuration of all inputs / outputs and the parameters of use.

Engine sliding Nice Robus RBS600 (up to 600kg) irreversible, 24 VDC, Magnetic race end, Integrated radio receiver control unit, Compatibility with optional backup battery (PS124).

Efficient and safe: Functional mechanical design and high-performance materials.

Unlocking lever easy to drive and secure; magnetic, Simple installation and it allows reducing the length of the zipper.

Easy to program, Thanks to the MyNice Pro App, connecting the pro-view control unit or the bidi-wifi.

Support nut DEA Mac / sting

Electronic input plate 230Vac for Motor V2 AYROS 24V.

Metallic mass detector wireless two-way at 868 MHz Motorline Msmf-loop To use with the MRMF-REC receiver, being able to perform Vehicle detections in accesses or roads No need to carry out works to bury wiring like magnetic turns.

Metal mass receiver Motorline Mrmf-Rec to use with the MSMF-Loop sensor with the possibility of Food to 24VDC or 230VAC.