Sectional engine Forsa DELTA 806 for sectional doors up to 10 m2 of 600N with built-in receiver box, 2 RollingCode controls and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and swing doors up to 10 m2.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Cylinder running 20 Hydom.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

Other, of circular cross-section CAME V600.

Electromechanical motor Oxygen Sargon at 230V for residential-use swing doors up to 3m (Sargon S) or up to 4m (Sargon M).

The motors of the Sargon series features a 300 mm (Sargon S) rod 400 mm (Sargon M), and are designed to be used in light doors of up to 250 kg.

Straight drive arm and slide guide CAME STYLO with mechanical end race in opening.

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Fast coupling clutch V2 In the case of engines with a rated torque of not more than 20 Nm (for LEX, LEX-RM, LEX-FE, LEX-RFE).

Replacement of sliding motor housing DEA LIVI/N for the 230V and 24V versions.

There are two models to choose from depending on the version with mechanical or magnetic end of race.

Guardaparkig Beninca available in automatic or manual version.

The automatic version has a 24Vdc engine for intensive use, designed to control access to vehicles in a parking area. The motorized automation ensures your parking space offering excellent comfort.

The manual version guarantees the same effectiveness but with the inconvenience that it must be manually operated.

Pineapple Beninca DU45E, AU45/L, and AU96/L.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

Electrical brakes Erreka ERGOS.

Compatible with axle drives 48/60mm, 120/160/200 KG

Unlocking key Erreka Ares & Calypso.

Photocell of safety ROGER M90/F2ES, radio-receptor of 24Vac.

Set supports and magnets sliding motor V2 YROS.

SUB D40X25 P994.

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Up to complete in aluminum motor batiente Motorline JAG600.

Pinion or sprocket Sectional engine CAME V600E, V800C and V900E.

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

Other CAME g03750-G0375215

Electronic plate DEA TE700

Replacement engine maneuvering spindle LOOK vástago 520mm.

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

Sliding engine DEA LIVI / X 24V for residential or community doors of 600 or 900 kg semi-intensive use, Maneuvering box with built-in receptor and magnetic career finishes.

Replacement End of career Forsa VENUS left with their microinterruptors and connected.

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Unlock Motorline BRAVO lock bulb with 2 keys.

PUJOL P1 140 XL-100 Motor Strap with a length of 355 mm.

Spare Part Erreka ORION KT2010F and KT2000CF.

Unlock with a lever key, which will be used in case of installation on surfaces, such as sand or ground.

Compatible with engines Nice M-Fab, L-Fab and Big-Fab.

Maneuvering DEA Net230N with built-in receiver, universal with digital screen for 1 or 2 motors in 230V, with or without magnetic encoder.

Selection in a single step, of the type of motor used (Sliding, swing, tilting, barrier, sectional door, piluma), with automatic configuration of all inputs / outputs and the parameters of use.

Support nut DEA Mac / sting

Hydom 3LC hydraulic motor joint kit.

Electronic input plate 230Vac for Motor V2 AYROS 24V.

Metallic mass detector wireless two-way at 868 MHz Motorline Msmf-loop To use with the MRMF-REC receiver, being able to perform Vehicle detections in accesses or roads No need to carry out works to bury wiring like magnetic turns.

Metal mass receiver Motorline Mrmf-Rec to use with the MSMF-Loop sensor with the possibility of Food to 24VDC or 230VAC.

Nice spamg217b00a | Replacement Piñon Set Nice Toona 230vac

Gear or Piñon consisting of a set of replacement parts compatible with the Swing Motors Nice Toona 230VAC, which includes a conical pinion, a nylon pinion and washers.

Electronic plate FAAC 578d for automations of doors Slides or industrial gates at 230V.

The 578D card can be installed at a distance to control Sliding cancelas or industrial gates; It can also be inserted into a specific container equipped with a disconnector, teleketrons, control keypad and activation key.

Electromechanical motor CAME Irreversible 24V ATI ATI for residential or community swing doors Up to 3 meters and up to 400 kg.

The CAME ATI A3024N It is an electromechanical 24V gearmotor designed to automate swing doors of a sheet with maximum reliability and safety. It belongs to the renowned ATI range of CAME, one of the most robust series of the market, ideal for both residential and community facilities with intensive use.

Professional wireless numerical keypad for automations of doors, barriers and motorized accesses, operating exclusively by radio frequency to 433,92 MHz, with 4 independent channels To control different devices from a single keyboard.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

Twin ACM Titan double coil for roller axis Ø76 blinds with lifting capacity of up to 360kg. The engine has electrofrain for the lock of the blind and its corresponding unlocking by handle.

ACM Titan is designed to Motorize roller shutters of commercial or industrial premises compensated by springs and pulleys of 240mm As long as your axis is 76mm.

Aluminum and iron door hardware set for the MAGIC power supply Erreka.

" The manufacturer Erreka has decatalogued this product "

Table of manoeuvres Erreka Digital SMART-D201 for 1 or 2 motors pulsing at 24Vdc and electric lock output.

The SMART-D201 table is valid for DC motors: TEMIS, KAIROS and ARES.