Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

KIT's engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Engine Clemsa AA30 electromechanical 230V for one-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

The ERA Keypad is a wired 12-key digital dial/keyboard, also with connection technology Nice This is BlueBUS.

Kits Linear hydraulic motor Erreka VULCAN intensive use for swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Motor kit CAME A5000A electromechanical 230V for one-bladed swinging blades up to 5 m, with a maximum weight of 400 kg.

In the case of vehicles of categories M1 and N2 FAAC sectional

Maneuvering V2 City9 Analog 230V for sliding doors.

"The City9 box has been replaced by the New model flexy2 Totalmenta compatible "

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Curved arm PUJOL reference 900500090 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

Pre-assembled chain guide V2 THE AZIMUTH.

Engine Nice RUN HS for the rapid actuation of switches for use in the manufacture of motor vehicles 1.200kg.

Rapid opening and closing maneuvers: RUN400HS opens a 4 m canopy in approximately 6* seconds, while RUN1200HS opens a 7 m canopy in approximately 18* seconds.

The key and proximity card reader Erreka TAGREAD has been designed to allow access, through keys and proximity cards, in automatic door installations. The reader reads the code from the keys and proximity cards, and sends it to the TAGBASE decoder (not included).

Security transmitter by radio 868MHz Erreka RADSECTX that next to the receiver Erreka RADSECRX will get two-way radio communication for the security bands.

Electromagnetic lock Motorline EF70 with a capacity of up to 70 kg at 12 Vdc to 24 Vdc power supply.

Kit Barrier shortage FAAC B614 in length 2 and 3 metres

Unlocking kit Nice KI1 from the outside with metal rope and key chain.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine FAAC 413 electromechanical 230 V for residential swing doors of up to 1,80 m (without electric lock) or up to 2,50 m (with electric lock).

Electromechanical engine V2 STARK6 irreversible in 230V and 24V format for swing doors with blades up to 6m. Designed to power residential or small semi-intensive community doors.

Straight telescopic harnesses for hydraulic motors Erreka the ATLAS model.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Table of manoeuvres Clemsa 24 Vdc for sectional doorss residential, ideal for replacement of the AS60/AS120 engine.

KIT engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

In the case of vehicles of categories M1 and N1 with a maximum mass exceeding 2000 kg: for duplication of fixed-code commands such as binaries and trinaries.

* Special prices for professionals. Contact us to open your file.

Motor kit CAME AXI Irreversible 24V for double sliding doors up to 2,5 m per sheet.

The ideal solution for residential sliding doors and networked neighborhood communities.

KIT Motores CAME ATI electromecánicos 230Vac irreversibles pensado para motorizar dos puertas batientes de hasta 3m por hoja.

Solución ideal para instalaciones de cerramientos de tipo residencial y comunitario.

Tornillo sin fin siempre protegido gracias a la cubierta dedicada.

Engine CAME ATS 8K01MP with 24V for use in the manufacture of motor vehicles up to 3 m per daya.

ATS is the universal telescopic engine for swinging canisters.

Microwave sensor for opening automatically closed doors, thus avoiding touching on handles and thrusters. It can be applied to any automatic door, to ensure convenient and safe access.

Spin 650N NICE engine for sectional doorss up to 8,8m2 and swings up to 9,8m2.

This is a universal maneuver chart DEA NET24N/C with screen and box 100 G, for 1 or 2 24 V DC motors, with or without magnetic encoder.

One-step selection of the type of engine used (slide, swing, tilting, barrier, sectional door, pylon), with automatic configuration of all inputs/outputs and usage parameters. Factory setting for sliding doors.

Table of manoeuvres Nice MC800 for 230 V swing door motors with BlueBUS technology and Opera system.

With technology Nice BlueBUS, compatible with the Opera system, for the management, programming and diagnosis of automation, also remotely.

Compatible with the Opera system which, through the O-View multifunction screen, allows you to customize the system by modifying the opening and closing positions, the leaf gaps and decelerations, changing for each motor parameters such as, for example, force, speed, sensitivity to obstacles.

Central command Nice Moonclever MC424L for 24 Vdc sliding door motors, without encoder, with integrated receiveror and ready for Opera and Solemyo system.

Garage crew Hormann RSC2 EcoStar 2 channels with a frequency of 433,92 MHz.

Blister of the brand GP. What. This is a 3V CR2430 lithium battery.

Alkaline battery 6V 11A GP. What. Blister x5

2-metre lathe the unit for Medva swinging or tilting hydraulic motors with their respective racors.

KIT Motor reducer BFT 24V TIR120/EOS120 FROM63

External receiver CAME RKLT-120 with built-in antenna and frequency 433 MHz for motoring blinds, awnings and curtains with an electromechanical power output of up to 800 W.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Automatic barrier CAME CAT ideal for access management in private and public contexts for road control. What. It is an automaton with 2 automated pillars with a chain to regulate the passage of vehicles.

NICE ROA40 electronic plate for sliding motor ROX600 and ROX1000 with built-in receiver.

Issuer of the copy Remocon RMC165CS for fixed code duplication at 433,92 MHz.

The duplication must be done with the machine Remocon HDC 900.

* Special prices for professionals. Contact us to open your file.

Other, of circular cross-section DEA NET230.

List of adapters for tubular motor Motorline ∅45mm Compatible with 20nm, 30nm, 40nm, 50nm models for roller domestic blinds and curtains.

Plastic motor housing Nice ROAD 400.