Home

Sensors are the electronic devices used to activate the door opening as well as to ensure the safety of users.

Garage crew LIFE FIDO RollingCode 433.92 MHz with two channels.

24V DC control panel for Motorline barriers with programming via display, built-in receiver, obstacle detection, limit switches, automatic route programming, soft stop time regulation, maximum consumption for 1A motors, lock management, 23 Rolling code memories 433.92Hz.

" THIS PRODUCT HAS BEEN REPLACED BY THE MC60 PLATE "

All barriers powered by 230Vac motor, the possibility of saving in memory 99 RollingCode codes of full opening with deceleration in closing and opening.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

24V EBP vertical electric lock with external unlock + 230V transformer.

" THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER, REPLACED BY THE LOCK ELECTRICITY SUPPLY"

Electrically locked vertical EBPE 230V with external unlock.

" THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER, REPLACED BY THE LOCK THE "

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of 1 sheet), with pre-assembled guide in one piece of 2,850 mm. What. Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Electromechanical barrier 230 Vac Motorline Semi-intensive use KBA5 with an articulated aluminium mast composed of two profiles of 2,5 m (total 5 m).

24VDC power plant, for 2 pulsating motors, with box, transformer and built-in receiver with memory for 120 codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC62 "

Table of manoeuvres DEA In the case of vehicles of categories M1 and N2 for 1 engine with clutch, slide or barrier. Anti-crush safety device, 433 MHz radio receiver, normal speed regulation and deceleration in opening and closing, force regulation with 70 separate opening and closing levels.

PLATE "203RR" HAS BEEN DE-CATALOGED BY THE NEW ELECTRONIC PLATE DEA NET230N FULLY COMPATIBLE

Kit Leds Barrier Aprimatic PATROL PLUS for the oval measuring arm 76x49 mm .

" This product is discontinued by the manufacturer Aprimatic "

Electrically operated motor Medva MARTE for use in the manufacture of products falling within heading 8528 up to 2000 kg (MARCH 2000 H4) and up to 2500 kg (MARCH 2500).

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

Motion detector FAAC XBFRM1 (single directional microwave radar).

Resistive safety belts ERREKA FLPR not crushed for automatic doors or electromechanical barriers.

The resistive band is a mandatory safety system to comply with current regulations which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

KIT Motor reducer BFT 24V TIR120/EOS120 FROM63

Microwave motion detection radar up to 3000 mm in height.

A width of not more than 30 mm".

KIT Motor reducer BFT MANUFACTURE FROM MATERIALS OF ANY HEADING

Motor gearbox V2 alfariss irreversible electromechanical model with 24V for sliding doors up to 300 kg in weight. With obstacle detection, encoder, steel pinion and precise magnetic race ends.

* THIS ENGINE HAS BEEN REPLACED BY THE MODEL TORQ OF 24V UP TO 500 KG *

KIT Motor Came BX-78 from 230V for sliding doors of up to 800 kg and of a length not exceeding 14 metres. What. It incorporates electronic card with programming display, built-in radio decoding, motion control device and mechanical race terminals.

" THIS PRODUCT IS DISCONTINUED, REPLACED BY MODEL OTHER OF A THICKNESS OF "

Outer receiver CAME model RKLT-50 for powering electromechanical end-of-course blinds, awnings and curtains up to 50 Nw.

" This model has been replaced by the RKLT-120 with higher benefits "

Electromechanical engine V2 AXIL Irreversible in 230V or 24V format for inclined canopies up to 2,8 m per sheet.

" THIS ENGINE HAS BEEN REPLACED BY THE MODEL STARK3 FROM THE SAME MANUFACTURER "