Best sellers

Showing 1033-1056 of 2073 item(s)

Swing Gate Motors

Hydraulic motor Forsa HALF TANK for sliding doors of Community use up to 7 m

Forsa

HALF TANK

€410.00

Hydraulic operator Forsa HALF TANK for sliding doors of Community use for leaves up to a maximum length of 7 metres.

Control Panels

Table of manoeuvres V2 EASY1 with built-in receiver for roller shutters and blinds

EASY1

€47.00

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Manufacture from materials of any heading

Columns from outside NICE Era Post

Nice

ERA POST

€69.00

NICE exterior columns of aluminium for photocells, selectors and proximity readers height of 500 mm and 1000 mm.

Swing Gate Motors

KIT Hydraulic engine Aprimatic TWENTY 270 unlocked semi-intensive for swing doors up to 4m

Aprimatic

KT02TWENTYS

€526.00

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Overhead Door Motors

Electromechanical motor 230 V Medva BASIC H4 for residential swing doors

MEDVA

BASIC H4

€395.00

Electrically operated motor 230V Medva BASIC H4 for use in the manufacture of motor vehicles residential use from one or two leaves up to 10m2.

Swing Gate Motors

Electromechanical engine EMFA BAT 230VA for floating caps of 3 m by sheet

EMFA

EMFA BAT

€192.00

Electromechanical engine EMFA BAT 230V for residential folding doors 1 or 2 sheets, ideal for automating swinging up to 3 metres per leaf.

Parking controls

Garage crew Sommer 4050V frequency 40.685 MHz

Sommer

4050V

€55.00

Garage crew Sommer 4050V 2-channel with a quartz frequency of 40.685 MHz and programming by combination of dip-swtiches is therefore configured by placing the corresponding combination of digits.

Control Panels

Table of manoeuvres Aprimatic A45M for 1 or 2 sheet swing doors

Aprimatic

665180000Q0

€136.00

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Barriers of passage

Automatic barrier FAAC B614 24V electromechanical with round or square mast

FAAC

B614

€2,175.00

Automatic barrier Clemsa model B614 operating at 24 V, 100% continuous frequency with a maximum bar length of 2 to 5 metres depending on the bar selected, and an opening time of < 2 s (80o with a bar of 3 m).

Receiver kit Erreka IRIN2S-250 independent at 12/24V

Receptors

Receiver kit Erreka IRIN2S-250 independent at 12/24V

Erreka

KIT IRIN2S-250

€108.00

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz. Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

KIT engine Pujol P1 II for revolving doors up to 235 kg...

KIT engine Pujol P1 II for revolving doors up to 235 kg... 2

Roller Garage Door Motors

KIT engine Pujol P1 II for revolving doors up to 235 kg single phase

Pujol

P1KP10M002

€1,456.00

I'm going to go with the P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox. Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

Motor articulated arm Nice HYKE HS 24V fast for swing...

Motor articulated arm Nice HYKE HS 24V fast for swing... 2

Swing Gate Motors

Motor articulated arm Nice HYKE HS 24V fast for swing doors up to 3m

Nice

HYKE HS

€556.00

Motor for rapid actuation (HS technology) for swing doors with blades up to 3 m or 270 kg. Electromechanical gearbox with articulated arm, external mounting, 24 Vdc, with magnetic encoder. Ideal for residential applications also in the presence of large columns. Ideal for heavy use and fast manoeuvres: opening to 90o in approximately 10 seconds.

Roller Garage Door Motors

Motor kit Clemsa AR2581F for roller shutters up to 170 kg

Clemsa

3400C1AR581F

€261.00

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises. The manoeuvre chart of this KIT is model CLAS 1 with receiver card RNE248 at 433 MHz.

Overhead Door Motors

KIT's hydraulic motor Erreka ATLAS with saxophone hardware for tilting doors up to 15m2

Erreka

KIT ATLAS

€950.00

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Swing gate accessories

Pivot rear engine linear support HyDom

HYDOM

9783/95/2

Rotate rear support to HyDom engine Lineal series.

GPRS receiver with telephone opening, remote control and RFID keychain - Picture 1

GPRS receiver with telephone opening, remote control and RFID keychain - Picture 1 2

GSM, Bluetooth and WiFi modules

GPRS receiver with telephone opening and control

Intratone

06-0129-SP

€207.00

GPRS receiver with Intrabox HF for opening with mobile phone by telephone call, and remote control capability. It has functions such as access control, time use, restrictions, access registration, etc Complete all-inclusive kit, without commitment or subscription, with 10 years (SIM card) of unlimited data updates. What. With Intrabox you can manage...

Sliding Gate Motors

KIT engine Erreka LINCE 24V for residential sliding doors up to 650 kg

Erreka

LINCE5

€668.00

Engine Erreka LINCE to 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of run (encoder).

Sliding Gate Motors

Engine Erreka LINCE 24V for residential sliding doors up to 650 kg

Erreka

LIS624

€489.00

Engine Erreka LINCE at 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of race (encoder).

KIT engine ACM Titanium without electro-brake with...

KIT engine ACM Titanium without electro-brake with... 2

Roller Garage Door Motors

KIT engine ACM Titanium without electro-brake with rolling shutter gearbox

ACM

KIT ACM TITAN

€150.00

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages. Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the...

Spare parts

Evolus glass door automation strap

Forsa

VID606

€17.50

Evolus glass door automation strap.

SOMMER SOMMER SOMMER S3 + 24V RESIDENTIAL MOTOR KIT Up to...

SOMMER SOMMER SOMMER S3 + 24V RESIDENTIAL MOTOR KIT Up to... 2

Sliding Gate Motors

SOMMER SOMMER SOMMER S3 + 24V RESIDENTIAL MOTOR KIT Up to 400kg with Magnetic Race End

Sommer

KIT STArter S3+

€360.00

Sommer Starter S3 + drive for sliding doors up to 400 kg (residential use), designed to offer fast, soft and safe maneuvers in small and medium-sized doors. The range Starter S3 + Combine intelligent control with a modern radio system Somloq2 (868.95 MHz), low consumption at rest and a construction prepared to run outdoors (Ip54). The version S3 + It...

Receptors with Access Control

Memory Access Control PC-Copy Receptors

Tecnoparking

MEMORY-PC

€6.00

Memory Control of access accesses PC-Copy.

Cap adaptation shaft pinion Motorline Rosso Evo

Spare parts

Cap adaptation shaft pinion Motorline Rosso Evo

Motorline

MRS26

€9.00

Cap adaptation shaft pinion Motorline Rosso Evo.

Spare parts

Bronze cap DEA Mac

DEA SYSTEM

340010

Bronze cap DEA Mac

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.

Best sellers

Hydraulic motor Forsa HALF TANK for sliding doors of Community use up to 7 m

Table of manoeuvres V2 EASY1 with built-in receiver for roller shutters and blinds

Columns from outside NICE Era Post

KIT Hydraulic engine Aprimatic TWENTY 270 unlocked semi-intensive for swing doors up to 4m

Electromechanical motor 230 V Medva BASIC H4 for residential swing doors

Electromechanical engine EMFA BAT 230VA for floating caps of 3 m by sheet

Garage crew Sommer 4050V frequency 40.685 MHz

Table of manoeuvres Aprimatic A45M for 1 or 2 sheet swing doors

Automatic barrier FAAC B614 24V electromechanical with round or square mast

Receiver kit Erreka IRIN2S-250 independent at 12/24V

KIT engine Pujol P1 II for revolving doors up to 235 kg single phase

Motor articulated arm Nice HYKE HS 24V fast for swing doors up to 3m

Motor kit Clemsa AR2581F for roller shutters up to 170 kg

KIT's hydraulic motor Erreka ATLAS with saxophone hardware for tilting doors up to 15m2

Pivot rear engine linear support HyDom

GPRS receiver with telephone opening and control

KIT engine Erreka LINCE 24V for residential sliding doors up to 650 kg

Engine Erreka LINCE 24V for residential sliding doors up to 650 kg

KIT engine ACM Titanium without electro-brake with rolling shutter gearbox

Evolus glass door automation strap

SOMMER SOMMER SOMMER S3 + 24V RESIDENTIAL MOTOR KIT Up to 400kg with Magnetic Race End

Memory Access Control PC-Copy Receptors

Cap adaptation shaft pinion Motorline Rosso Evo

Bronze cap DEA Mac

Filter by

Categories

Price

Manufacturers

Home